Premiere Elements

I am exporting a video that has both 4k and 1080p videoclips in it. I am then going to upload to YouTube (and Rumble). Apparently the project was automatically set to 1080p when I started it, because that is the recommended setting when I go to export. I figure it's impossible, but I would *like* to not downgrade the 4k clips...? Any advice on what I should do to achieve optimum video quality?

Hello, I recently bought 2 HP Z Book Windows 11 computers, and installed Premiere Elements 2023.  One computer runs Premiere Elements with no problems.  The other computer allows Premiere Elements to work for a while, then gives the following error message:...................  C:\Program Files\Adobe Premiere Elements 2023\dvascripting.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.Error status 0xc0e9000a. ................  This has happened twice.  The first time, I uninstalled PE 2023, and reinstalled it.  The problem has occurred again.  Would appreciate any help solving this.  I have used PE 2018 with Windows 10 computers, and did not have this problem.  Thanks for any help you can provide.

Hello,Thank you for your detailed reply. Unfortunately, your assumption that I amreferring to Adobe Premiere Pro was incorrect. I am referring to AdobePremiere Elements. I have lived all my editing life using PremiereElements, so it never occurred to me that my questions on this issue wouldbe interpreted as being for Premiere Pro. Had that occurred to me, Icertainly would have been more specific in describing my product.So here we are. I'm still experiencing the same issue (but on PremiereElements, not Premier Pro.)Do you have some idea for that situation?Best regards,Robert (RJ) Trede

hello, i use Premiere Elements 2022 with mac M1 and i can´t set in- or out-points shortcut I or O is not working. Could you help me please? 

Adobe Premiere had been working fine for me for a good number of years. Today I got a warning that my system had been running low on memory, after deleting some files I tried reloading Premiere and it refused to start. I tried every solution including deleting the cache files (1 TB worth!) and eventually I managed to get to the stage where Premiere was working. HOWEVER, when I tried to open up one of my pre-existing files it asks me to locate a file that no longer exists. When I click skip or mark as offline the system immediately crashes.

Hi All - Does this not work? - I just got this and wanted to use it on my M1 laptop with a larger screen having the time line and main program on one monitor and the preview of what Im working on - on the second one...Does this not work? - or is there a work around? Thanks

I keep getting the following error:Exception Code: EXCEPTION_ACCESS_VIOLATIONException Parameters: Access violation reading location 0x000000000f8ab0c8Exception Message: 3221225477 The instruction at 0x%p referenced memory at 0x%p. The memory could not be %s.Please help!Thanks

I've started to use PE 15 on my Windows 10 PC. It seems to do what I want.  What are the most significant changes between 15 and 2023? Is rendering faster? Am I missing some wonderful new features? Thanks, Jim

Hi, recently when I use Premier Elements 2023 video editor I've had an issue that any photos or video turn a really green shade when I import them, and they stay like that meaning the exported video has a very green shade too making it unusable. Any ideas what might be causing this and how it can be fixed? I think it might be to do with colour management but not sure how to fix. Thanks, Graham 

Hello Adobe Community, I have been using Adobe elements 22 for about 6 months now to make videos and have had few issues. Tonight I have found a problem I cannot seem to find a solution for. When trying to view/edit video from my GoPro 10, any videos I have shot in 240fps, 2.7k for ultra-slow-mo crash the program. Elements lets me put the video on the timeline(about 50% of the time, other 50%, crash) (expert mode) and play it, however if I try to do ANYTHING else it freezes the whole program and it crashes.  I have the appropriate HVEC codecs purchased from the MSFT store, and edit other gopro footage without an issue.  My PC is brand new, with an i7 and NVIDIA GTX 4070ti, and I have had no other issues with other 4k footage. Can anyone please help!? Thanks. 

I'm something of an expert in premiere pro but helping a client do some preliminary work on a project in premiere elements.    What he wants to do is rearrange the video only clips in the timeline without overwriting anything and without creating a gap in the music track...  The simplest way I can figure out to do this is to drag (on a mac) while holding the option key, which moves the clip inbetween 2 clips but leaves a gap where the clip was previously.  Not a big deal to just control click on the gap "delete and close gap"  but wondering if there's a simpler way to do this...   Could do a cut and paste insert but that creates a gap in the music...  If there's a way to lock the audio track, that would work...  but doesn't seem possible..   Thanks.    

Can someone please tell me, why this don´t want to export my video? It stucked in 00:05 sec to done its job. I updated everything I could, but it still doesn´t work. I spend more than 3 hours to solve this problem, but nothing helped. I used this software for more than 20 videos and it worked, but now... nothing. I don´t want to export video in 4K, I tried also quick export in low quality - nothing. Crashed or stopped. And no, I don´t have old  comp. Is imported videos corrupted? NO! Is it in different formats? Well yes, some of them is from phone, but is this something, that PE is not able to solve with?    [Profanity removed by moderator]

I cannot export export to dvd files on my c: drive with PE 2023.  Created folder in root of C: with full permissions.  Have over 1.5 TB of space on C: available.  When attempting I get the message in the screenshot below:I am able to gen dvd files using 2019. Any help would be appreciated.  My laptop does not have an internal DVD drive and I do not seem to have an external that matches the listed approved drives.  

Hi all. I have downloaded videos from my phone to my laptop, then from laptop to Premier Elements 10, but the videos are upside down. How do i rotate them to the right way up? Thanks.

I'm working with the Adobe Premiere Elements 2020 version and I've used the "shake reduction" option on a few clips but those clips now have a purple banner across them that say "Click shake reduction to start again" or "Frame not analyzed for stabilization; click stabilize." I even exported and saved the video to my computer and watched it back in my files and those banners are still there. How do I get rid of those purple banners with text?

 

My project will Add Media from iPhone .MOV file, it will play the video and do the cut/delete/close gap and etc.  BUT when I try to do an Adjust in Expert Mode it slams me with an angry red banner “Shake Reduction requires clip dimensions to match Project Settings” and insists I “Create new project”.1. How do I even determine what my clip dimensions are?  I don't get much from 'Properties' of the file...2. I search the presets for a matching spec for .MOV and that doesn't help.I'm running Win10 Pro on a pretty capable PC with a good graphics processor.

Adobe Elements 7 crashed. Tried to uninstall & reinstall . Each time I uninstall and reinstall, as soon as program opens it searches for previous catalog (?) It appears for a few seconds displaying old projects and then crashes. I think that I added a far too large file previously and this caused the original crash. Can I interrupt the startup and remove previous project items ?I have spent Very Many Hourst trying to resolve this.Please can someone help me ?

Nach einem Schnitt wird der gelöschte Teil des Clips weiterhin abgespielt und nicht der neu hinzugefügte Clip. Im Bild sieht man, dass der Abspielkopf an einer Stelle ist, an der das Bild eigentlich schwarz sein sollte. Stattdessen wird der gelöschte Teil des Clips weiterhin gezeigt. Woran liegt das?

Hello! I was trying to import an MOV file into Premiere Elements, but when I try to import the files it shows that MOV is not supported, despite the User Guide book listing MOVs as compatible. Is this an error with Premiere Elements? I really don't want to have to convert to WMV all the time.   I'm running Adobe Premiere Elements 1.0 from the box set I bought years ago because I haven't updated from Windows 7 or XP yet.

I am using Elements 2023. I rendered a 4 minute mp4 from OBS and tried to export and share. The program does not respond and I have to close it. I used to do this export and share all the time with older elements.

I'm a long time user of Photoshop Elements and have been reasonably happy with it.Recently, I decided that I wanted to produce videos for family consumption.  I purchased Premiere Elements.The number of times that Premiere Elements has crashed is really frustrating.  It's happened during multiple different operations. I question how much QA was done on this product and it was released months ago -- so I would expect many of those bugs to be fixed.What would be a good alternative to Premier Elements?  I'm still looking for a relatively simple video editing/production solution and it's not clear to me which of the Adobe products should be considered.  Maybe it's time to look elsewhere.Thanks

Hi ,The above software is now freezing and failing to respond. I am basically attempting to add more media to complete a short film. The software loads up and allows me to select the media (MP4 files), transfer to project assets, then when I move clips to the story board the loading screen appears and after about 12% it stops, freezes then fails to respond. I have allowed the programme to run to see if it will operate but it just freezes and when I exit a message confirming that an encountered problem has been reported to microsoft.  I have also tried a complete restart to the movie and the same things occurs, I have ran malware and scan checks for any rogue files and found nothing. When I am running the programme there are no other apps running.My PC is operating windows 10 and is up to date.Can anyone explain why this expensive software has started crashing?Can anyone help or advise on how this problem can be rectified or how I can get a refund?Thank you for any help. Cheers&nbs

Wie kann ich bei ADOBE PRE 2022 eine fertige und vertonte Diashow auf eine DVD bzw. CD Brennen?

I have an Premiere Elements project as well as all the videoclips in it saved to an external drive. I've been working on this project for months without issues, but today I briefly unplugged and plugged the external drive in. Now some of the clips in the project show "media offline." Meanwhile, other video clips are showing up as usual. Additionally, some video clips have been automatically placed in the wrong spot in the project. (I assume because they have the same file name as the "offline" file.) On the external drive, all the videoclips are separated into folders based on the date recorded. Some of the videoclips from one date have the same default file name ("C0033," "C0034," etc.) as those in another folder. And I don't believe that the external drive has been given a new drive letter... Help?