Questions

Hi, I have a server (NAS) at home and I copy my images from the camera card into the server by folder (Folder name would be location name and date : Like - NYV20250903) I would like to know how I can share the same catalogue from my laptop and the desktop , both connected to the NAS thru home LAN network,... That means when I open a library in laptop or desktop I should be able to see the processing I did from my laptop or desktop.....

Since the release of 14.5, I've had an ongoing issue wherein I will add or edit a description on a photo and after a few seconds or when navigating to another photo and back to the original, the description will revert to the prior state (either blank if there were no description or the previous version of the description prior to any edit applied).

Can someone explain why lightroom will only let me remove up to 1000 photos at once? I'd like to just select all my weddings from these past months and get rid of them on Lightroom. If I select more than 1000 it won't remove them, so it makes the process annoyly time consuming. Or is there a way I don't know about??

Now that running AI denoise in Lightroom Classic no longer creates a new DNG, I assume it has to be storing a large amount of data somewhere.  Before I go crazy with denoise (the results are often amazing!) and consume many GB of storage in my Lightroom library files, I wanted to get an idea how much space this takes. I have no way of measuring the library file size increase after a single operation, so I tried the same operation in Adobe Camera Raw (17.4) and found that denoising one 30.8MB Nikon D500 raw file created a new a 6.1MB .acr sidecar file.  So it appears that, at least in this case, denoise created an additional file that is about 20% the size of the original file.   Does anyone know if Lightroom Classic does something similar?  If it does, that means that running denoise on 5GB of raw files (only about 162 D500 files) will result in growing the library files by 1GB.  This is better than a whole new DNG, but it isn't insignificant, and would be part

Using 14.5.1 on a Mac ventura 13.7.8 27" 5k retina 2017When I open photoshop 2025 I can resize the screen with double arrows on the margins of the screen. Also, in the upper left of the screen the three dots appear: red, yellow, green as on any mac window. Lightroom CC also behaves similarly to PS2025, three dots, and a resizable window.However, when using LrC, it "overfills" my display, no sizing dota appear. The upper toolbar, does not show the full menuIf I slide my cursor to the right side it will slide over and show, but that is at the expense of the left side, which is now off the display.I've tried changing the size of the ALREADY TOO SMALL text in preferences from "large" (which it is not), to "small default" and that makes no differenceAs I said, PS2025 behaves fine in this regard as does Lightroom CC, LrC does not.This is a real PITA in workflow. What can I do to change this to a more acceptable behavior, like that of PS2025 and LrCC? I do NOT want to change my disp

el Lightroom classic no quiere importar los RAW de X-E5, sin embargo el CC si los importa, contar tambien que mi version del Classic es v14.51, no se puede actualizar a la ultima version por incompatilidad de hardware. Gracias

Hi everyone, Looking for some input on this bug or if it has even been reported, I haven't been able to find anyone who has the same issue so far. Since updating a couple of months ago (I believe to version 11.4 of LR Classic), the hue of the watermarks is no longer accurate. I had to create a new watermark that compensates for the difference in hue by making the watermark a more yellow-orange, as the watermark I use changed from a pure orange to red-orange colour.  As of version 11.5 I still have the same issue.  I was going to update to version 12 soon, but another co-worker updated, and they're now having a similar but opposite issue.  Their watermark is a desaturated burnt orange instead of vibrant red/orange, and unfortunately due to the source watermark already having 100% saturation, I haven't figured out a fix for their banner issue as I can't add enough saturation to compensate for it. I'm not sure if there are many people who use any colour/

 Förstår  inte Vadg ör jag när dett meddeland kommer. 

Possible Bug in Lightroom Classic (macOS – latest version) Issue encountered:While trying to search by metadata in the Library/Grid module, the user accidentally pasted an entire spreadsheet (many rows/columns of data) into the search field. What happens: Lightroom freezes immediately. Even after restarting the app or deleting temporary files, the issue persists. The problem occurs because Lightroom saves the last search query. So, whenever the catalog is reopened and search is triggered, the error repeats. Tested: even switching to another catalog and back does not clear the problem. Important: This happens even after resetting Lightroom preferences, so the issue is not cleared by a standard reset. Workarounds tested: Open Lightroom with a “clean” catalog and avoid triggering the search field in the problematic catalog. If resetting preferences doesn’t work, create a new catalog and re-import photos/folders from the old one. This bug can happen to anyone who accident

Bonjour, depuis peu j'ai ce message qui s'affiche, quelqu'un pourrait-il m'aider ?  MErci à vous !

Hi, I’m using the latest desktop version of Lightroom. My camera, the Fujifilm X-T2, is supported in Camera Raw. However, when I go to Lens Corrections → Enable Profile Corrections and select Fujifilm, I don’t see the option for the Fuji X-T2. Why isn’t this camera available in the list, and how can I apply the correct lens profile?

I'm building a new PC, without a dedicated GPU board.I'm thinking of getting a CPU for around $200 or $300 at most.Which of the CPUs below is recommended for Lightroom?- Rizen 7 8600G- Ryzen 7 9700X

Whilst I'm a happy LR Classic user for my professional work when it comes to one aspect of it I'm a novice: face recognition. I've recently imported all of my own personal family photos. I've got photos of my parents and grandparents, myself, my wife, her family, our children, and at all ages. Unsurprisingly it might detect a photo of me as a child as myself, as my siblings, as my children, or as my father. Similarly it sees group photos from family weddings and events and tries to tag loads of people that I don't care about.I've been going through confirming people, and/or adjusting them to the correct people, and/or deleting recognised faces - whether they are shapes in stone walls or people that are in the background of photos that I don't know.I appreciate that the recognition improves as one does more confirmations/rejections/adjustments. What I wonder though is, is there a way to tell LR to "go and have another look at the ones you guessed at earlier to see if you can make a

Problem with colors in lightroom and photoshop, i can see it good in windows visualizer, but in lightroom is this way im sending here

My problem is as follows.Any RAW (NEF)  image I use the new AI denoise on and start editing slows my M1 iMac down considerably to a point where the cooling fan noise is very noticeable and system performance very sluggish to the point where LRC becomes unusable.It should be noted that any RAW images I don’t use denoise on is fine, so I have to stress it only happens when editing an image with denoise applied.I tried all sorts GPU acceleration ON/OFF, GPU for display, increased Camera RAW cache sizes etc. only all to no avail. I did see some users reporting similar issues with both Windows and Macs on the Lightroom Queen forum but there haven’t been any satisfactory resolutions. The two recent updates to 14.5 and 14.5.1 this week haven't helped in fact if anything have made the situation worse.  Using the MacOS System monitor shows CPU useage at over 400% with a denoised and edited image but less than 10% when no denoise applied. As I said above for me the LRC latest

SummaryAdding keywords to images causes metadata write error symbols (exclamation marks) to appear, even when "Automatically write changes into XMP" is disabled in Catalog Settings.Steps to ReproduceDisable XMP auto-write: Catalog Settings > Metadata > Uncheck "Automatically write changes into XMP"Import a test image (any format)Make basic edits (exposure, contrast, etc.) - no error symbols appearClose and reopen Lightroom - still no error symbolsAdd a keyword to the same imageResult: Exclamation mark symbol immediately appears on thumbnailExpected BehaviorWith XMP auto-write disabled, NO metadata should be written to files automaticallyAdding keywords should NOT trigger write attempts or error symbolsKeywords should be stored in catalog only (as per user setting)Actual BehaviorExclamation mark appears on thumbnail after adding keywordClicking the symbol shows error dialog: "An unknown error occurred when trying to write metadata for this photo. Try again?"Dialog options: "Import

So, I have struggled with the print module in LRC on my Mac for a while now and it seems like others have too based on various LR tutorials on YouTube.  Specifically, when trying to use LCC profiles I get inconsistent results and recently always better results just letting the printer manage colors.  I have a Canon Pixma Pro 100.  I don't want/need to get into a long troubleshooting discussion here, rather my main question is - why is the Print Module interface different on Windows vs Mac.  Specifically, Mac has an extra button on the left side called "print settings" which seems to duplicate (and conflict) with a similar button on the right panel called "Printer".  So, Macs have four buttons along the bottom - page setup; print setting, print, and printer, while Windows "only" has three.  I am testing printing from a windows machine side by side and so far it seems more intuitive without inducing the potential for double profiling.  My main question

I'm on a Macbook Pro and recently, the three little colored dots in the upper left corner of the window is no longer visible. So, i can't 'x' out of the program or 'minimize' the program that way any longer. It is the only program or window that does not show the red/yellow/green dots now. Can someone advise on how to get this back or is the a specific change that LR has incorporated?  They do show up for Photoshop.  I've attached 2 screenshots. One with the dots and one without for reference. Thank you.  

Matériel neuf depuis peu : Mac mini M4 16GO + écran Proart Asus 279 . Malgré cela impossible de faire fonctionner l'outil réduction du bruit par l'IA depuis la version 14.1.1 de Lightroom . Que dois je faire pour pouvoir bénéficier des dernières évolutions de Lightroom . Merci pour vos réponses ou vos conseils !

I normally do all my Lightroom editing on a desktop pc, but will shortly be doing some travelling where I will be using a laptop.I plan to copy my catalogue to the laptop, and will take an external SSD with a copy of all my images.Question is: when I return from travelling, how do I update my desktop with all the new images and edits from my travels?Thanks 

I have created a preset to just assign the Adaptive Color profile to an image (I know, RAW only).  The problem is, I get different results when I use the preset vs. selecting Adaptive Color from the BASIC menu. When I created the preset, I applied Adaptive Color to a RAW image, the selected only 'Treatment & Profile' during the preset creation.  Should this work or am I doing something wrong?  BTW....the same procedure does seem to work for 'AI Denoise'. (EDIT: Actually, I must correct this....denoise appeared to work as the box was checked....however, it does not execute until you move slider or uncheck/recheck.  What is wrong that the presets do not seem to execute??)

Hello, do you have any GPU speed benchmarks for denoising? Does Lightroom also support AMD graphics cards in the calculation or only Nvidia? I'm particularly interested in the Radeon 7900 XT. I'm not entirely satisfied with the RTX 4070.Best regards, Mark

I’m editing a photo and opening mask tabs, but the app crashes after a few seconds while it’s loading. I also tried applying lens blur, and the same thing happened, it crashed again after a few seconds. This issue only occurs with this specific photo. I even tried editing some of the colors in another app and then imported it back into Lightroom, but the same issue happened. This problem does not occur with any of my other photos.

So I just did the most recent update for Lightroom Classic through CC. When I opened it I noticed the AI Denoise option has been replaced. When I selected the denoise option the following errors happened in the pictures attached. Any ideas to fix this?

When I had to send my computer out for repair, I removed all apps. When I got it back, I had to do a factory reset. All of my catalogs are on my external hard drive but now it is not showing. When I can get it to show by plugging it in after starting LRC, I only see files from this year and it looks like I have to import them. I reverted to the previous install, but that didn't help. Please help!