Questions

I have multiple versions of a graphic in my Project Bin, lets call them A, B, and C.Through out my 30 minute edit, I have used graphic A multiple times.Now I am doing a new version of the edit where everything is the same, except i want to replace every instance of graphic A in the timeline with graphic B. Instead of a "Replace Media", where I would lose graphic A in the my first edit timeline, i simply want to replace A in my second edit timeline.Is this possible quickly and easily?I know the long way is to save individual Project Files for each edit with a different graphic and use the "Replace Media" function, but I am hoping to keep all my timelines in the same project file.Thanks in advance.

Is there a way to search for multiple words in one search instance, or is the feature only able to find all uses of one word at a time?i.e. inputing a list of different inappropriate words in the search bar of the transcript function to fill out.

Hello everyone !  I have a disparition problem. In July, I worked on a film project.It was on the 9-10th of july. I know it because I made an Export.I know I spent time on it because I had to put a lot of subtitles.The project was on a Pegasus 32To disc.But when I openned it again in september, There was not a single trace of the July work,only a project from june, auto-saves from june. Nothing. Just like I never worked in july. But I know I did... I searched for .prproj on my computer and on my 2 disks that were connected to my mac in july, but found nothing... and of course, I wondered if Maybe I could have forgotten to save it, but as I know it took me a long timeto finish it, it seems not probable... And again, where the f... are my auto-saves ???? Well, if you have an idea... Thanks ! 

I've been using a Contour ShuttlePRO v2 with Premiere 2024 without any issues, but now that I went to the 2025 version of Premiere Pro teh ShuttlePRO is not working. My computer is still seeing the ShuttlePRO, but Premiere isn't responding to it. Is anyone else having this issue? Is there something I need to do in Premiere in order for it to work? I'm also using a Presonus Faderport 8 for my audio, and it works fine; but I did have to add it as a control surface. Please help; thanks!

I reset Premiere to its default settings and the bar on the clip that allows you to adjust the clip's transparency disappeared. Can anyone tell me how to get it back?  it was like this  

Hey @Mathias Moehl, just wanted to advise that I'm getting an error using the For Each Project Item block when reading generative AI-extended clips in the Project Panel: 'execution result:"unknown project item type 8 for item...' The block/script stops when it encounters these files, throws up the error, and there doesn't seem to be a way to ignore them.My script needs to assess everything in a given project from the root bin, so I've built a very rough workaround using ChatGPT which moves any items like that into a 'TEMP AVOID' folder (and everything else into a TEMP folder, which is then reviewed): https://chatgpt.com/share/68e23c72-bb1c-8005-b6d2-7144fd92fb51Just wanted to message in case you weren't aware of this, cheers (and again thanks for the amazing plug-in!)

Hi experts, I got two questions about captions. Appreciated your help : )   (1) I wish to place the captions at the absolute bottom of the frame, so it creates minimum disruption to my video subject. However, even when I set properties > align and transform > bottom, there is still a margin between the caption and the bottom of the frame. Is there anyway to fix it? I'm thinking of nesting the captions as a sequence and reposition it like an image, but this workaround seems impossible in the updated PremierPro.  (2) The captions will force my sentance to split into two lines despite there are spaces left in the same line. Is there any solution to remove the safety margin? Thanks in advance !  

When you add an Inner/Centre Stroke to text with no fill, it results in a specific appearance (see screenshot below). Rather than creating a text image file (in Photoshop) and then importing it into Adobe Premiere, is there a way to avoid this issue?  

I need a fix... Kindly anyone has a solution? 

Hi, I'm new here and new to Premiere Pro and video editing in general. Please don't go all Stackoverflow on me. I'm attempting to mask an image to hide it behind the subject's hand/shoulder, but when I create the mask, a strange thing happens where instead of hiding the masked part of the object, the masked portion remains in front but mirrored along the horizontal axis. What on earth is causing this?  

My Program Monitor just wen dark; not for the first time. In Copy 2, of a new Project, with a single clip, I was fooling with time settings and the "rubber band," then going back to Opacity; which is at 100% The clip displays on the source monitor. I dragged another clip onto the timeline, and later removed both clips, then returned the unedited clip; no change. Oh I also removed the Sound track at tome point. But this same thing has happened in totally different scenarios. The solution, this time, was to simply open Copy 1. I will save "copy 2",so I can go back to it later. What am I missing?     Title edited for better search by mod

Hi all,I'm facing an issue in Adobe Premiere Pro where I can't move the timeline view up to access higher video tracks. Normally, I could hold the left mouse button and drag the cursor upwards, which would move the timeline view itself and allow me to reach higher layers. However, this no longer works for video tracks.The strange part is that I can still move the audio tracks up and down, and I can freely move the video clips within the timeline itself — it’s just the timeline view that’s not working as expected. You can watch video.Has anyone encountered this issue, or does anyone have any suggestions?Thanks for your help!

Hi everyone,I am currently working with Automation Blocks in Premiere Pro (version 1.1.011) and I’d like to automate the following workflow:I have a main sequence called “Video”.Inside this sequence there is a nested sequence called “Headlines”.This nested sequence contains multiple headline tracks (Track 1 = HL1, Track 2 = HL2, etc.).What I want Automation Blocks to do:Open the nested sequence Headlines.Disable (hide/mute) all tracks except Track 1.Go back to the main sequence Video and send it to Media Encoder for export. The file name should include the headline, e.g. “Video – HL1”.Then repeat the process: disable all tracks except Track 2, export again as “Video – HL2”.Continue until all headline tracks have been exported as separate video versions.Basically, I want Automation Blocks to cycle through the tracks in the Headlines nest, make only one visible at a time, and export the main Video sequence with that version of the headline.My question:Is it possible to control track outp

I have a M1 Max Macbook Pro with 64GB and over the past few months I was exporting some 2 hour clips which took 6-8 hours to export. I was surprised by the time but never tried looking into it. Then after the latest Mac and Premiere updates, similar exports are taking  30 - 50 mins to export. Does anyone know why this was happening and how to avoid slow export times in the future?

 I defy anyone to help me with this issue...Premiere Pro v25, up to date—running on an HP for Gaming Victus 15. Just knocked the RAM up from 16 to 32. Everything else CPU and GPU has been left as was purchased, except the NVIDIA studio drivers i installed. Local drive has got about 100GB free. Bios test and all that jazz tell me the RAM is correctly installed. I think I notice a difference? Maybe the jump is not as earth shattering as I was build up to believe. RAM brand is Crucial. They any good? I know dick about CPU hardware so forgive my computer illiteracy if straight out of the gate my problem was buying from the KMART of additional hardware. Project file and media is running off Crucial X10 1TB SSD—media cache files are stored on there. Premiere is installed and run off the local drive. Media cacheThe lag includes the bottlenecking of Not Responding and incredibly delayed scrubbing and dragging on the timeline. 2-3 minute waits between making adjustments on the TL

Im still learning how to use the software and when i wanted to try to make subtitles, it says to use the text window but when i try to use it, it stays blackI tried selecting all audio tracks and singular ones, and it still doesnt work 😞

Hi, I'm having this issue: If I change the color of a clip label in the timeline it now changes the color of every clip with the same name. Meaning, if I've cut up a video file to use in various parts of the timeline, now they all change. I used to use this as a quick way to know clips a client didn't like etc to change/replace (label a single clip red, for instance), and now I can't do that. (previously posted by codys72658089 but also my exact issue, in a previous version of PP) In 15.4.0 the option to uncheck the option to "display the project item name and lbel colour for all instances" in no longer in the preferences panel (or at least I can't find it. Can anyone help?  Thanks

Hola a todos, necesito ayuda con un problema que tengo básicamente desde que inicié a utilizar Premiere y After Effects, resulta que luego de unos minutos de abrir el software mi PC se congela, produciendo una pantalla negra por unos segundos (casi un minuto entero) y al volver tengo la previsualización del proyecto totalmente en negro y debo cerrar el programa y volverlo a abrir para poder editar con normalidad. Este problema me pasa desde que lo utilizo, pero ahora con más frecuencia que antes, realmente no sé cual sea el problema y me cansé de buscar sin encontrar a alguien que le pase lo mismo. No tengo más plugins que Animation Composer, e intenté probar reinstalando el programa eliminando todos los plugins y sigue pasando el problema. Mi hardware es el siguiente:AMD Ryzen 5 5600xNvidia Geforce GTX 2060 6gb2x16 Ram = 32gb No tengo problemas de temperatura, no tengo problemas con otro software, no tengo problemas con juegos, es solo y exclusivamente con estos dos pro

Buenas chicos, no tengo manera de exportar un proyecto entero, o sea no renderizar si no, una vez terminado el video quiero copiar el proyecto entero a X ubicación, y no tengo manera. ¡Jamás me ha sucedido, pero esta última vez con un video me pasa, he intentado de todo, excluir archivos no usados, Excluir archivos de previsualización, de todo!!! Pero no hay manera. Como puedo saber de entre los 200 archivos que componen el proyecto, cuál es el problemático. ¡A ver si me podéis ayudar porque es batánate desesperante, Gracias!

hi everyone how is it going? im having this problem after the latest update, dehancer plugin is not showing up in premiere pro but it does in after effects, cant find a solution, does anyone had this same problem or similar with another plugin?Thank you! 

Hi everyone,I'm new to this software and am working on a macbook pro. I pressed ctrl + ~ to view the playback full screen (an instruction I found on google!) and now I am stuck! I have tried everything I can think of so can anyone please help me?! Thank you!!!

I'm trying to select my personal LUT's to apply on a video, but when I go to Creative tab -> Look, I can't browse my own LUTs, there's simply no option in there for me to choose, but a list of standard available LUTs. I used to browse them with no issues on Premiere 2024, and yes, all my LUTs have the correct extension .cube, as I already use them for years now.. Also, when I click Look tab and all those "SL" LUTs appear it also auto-clicks the one my mouse is hovering, so idk, might be a bug or something? Please help!

1 more issue i using mac mini m4 for editings when i export 25minuts video in premier pro latest version it's take 15 minutes but when i render same project in premier pro version  2024 it's take only 3 minutes plzz fix this issues everyone face this problem workflow is slowdown due to latest updates plz resolve it.

I'm trying to upload a video to YouTube, but everytime I try an error pops up, saying that the proccessing has been abandoned. I've tried several file formats, and it seems like what keeps happening is that only the first second is saving as a file. I have no idea why this is happening, someone please help.

My students drag in clips they've ripped (eg archive material of news broadcasts) and PP plays them fine. But they're blurred, until you pause the playback (when they appear totally sharp). There's a yellow line above the timeline. 'Render in-to-out' doesn't change anything. How can we see them playing without looking blurry? Obviously the clip format (variable) doesn't match the timeline format (1080, 50fps). But will PP render them nicely?Help! System:Premiere Pro 2025.3.0 (Build 84)PC - Intel i7-13700 (2.10 HHz), 32 GB RAM,