Questions

Has FE.AllowMultipleOpenProjects been brought back yet?Need to know if they've fixed their 'multiple project open at once' mistake. cheers

I've seen a couple of old threads on similar issue but wondering if any newer solutions based on most recent versions. I am experiencing an issue with Premiere changing the LUT on my projects. My main issue is not always remembering which LUT I was using prior. Which causes a major headache of course. Any way to recal the orignal LUT used or how to best prevent this? I've read some saying this may happen anytime new LUTs are added?

Using Transcription, is there a way to pull every instance of a word in a sequence into a stringout? I can't find an easy way to do so.

I want to use this circle as a mask for this footage on the track below it. I’ve used the Track Matte Key effect many times to create similar looks, and this step-by-step process has always worked: 1. Create a shape to use as a mask and position it on the track above the video.2. Apply the effect to the video.3. Select the track where the shape is located. However, for some reason, this method doesn’t work anymore, the size of the mask is too small and I don't know how to adjust it so that the size of the mask is exactly the size of the shape . What am i doing wrong? Please note, I did not change any parameters in the effect control tab and I also did not change any parameters in this new properties tab that replaced the essential graphics tabI just added this clip to my sequence which is 1920x1080 30fps and created the ellipse following the steps: graphics and titles > new layer > ellipse. And once again I'm not referring to the size of the video in the bottom tra

I can't change the color of the subtitles to white in version 25.4.1 Here's the screenshot.It looks that the text should be white #FFFFFF but on the preview is grey. Why? I'm used transcript to create captions.

Bonjour,Je constate que je n'ai plus l'effet accentuation dans les effets vidéo. Je ne sais pas si c'est dû à la nouvelle version ?Il ya par contre l'option netteté, mais qui ne permet pas autant de réglages que ne le faisait l'effet accentuation.  

Hello! ...please excuse my poor English... I'm a German film maker and I have a problem... There's always an echo or delay on my headphones while recording voice over. It's ONLY while recording. My setup: windows pc - premiere pro - scarlett focusrite 2i2 2nd generation - rode-mic! And it's the same with macbook pro! What am I doing wrong? Maybe you can help me!? Thanks!!!!!

What is this??????????????????? Problems again. After this error, I cannot start the program. Only Reset PC

Premier pro cant go full-screen... looks like it is not supported? Is someone addressing this? I am referring to the program window and not the playing of a video. The program window just has a "+" for expanding the window but it wont full screen..macos monterey 12.1 macbook pro 2021 16 in.

I've been trying to get the Teams project to work between my colleague and me in Premiere Pro. They had already created a personal project, but when they tried to convert it to a Teams project, it showed up as an empty/blank project on their end and my end as well. I don't want them to recreate the entire project. How would I go about getting this to work? They have the files all on their machine. How can we get them onto Google Drive and sync it with Premiere?

Al importar los medios y arrastrarlo a la linea de tiempo, en el panel "programa" no se ve el video, pero si se escucha. El codec del video esta okey, luego, me descargue un driver y en la configuracion de pantalla puse para que tome esa resolucion y no hay caso. Actualmente tengo la version 24.6.5, hace un rato edite un poco el video y cuando lo exporté te ve todo perfecto. Entonces, es como que funciona todo genial, menos eso de verlo en el programa. Ayuda plis 

I wish to export my project as Wraptor DCP in 4k. But there are only presets in 2k. How can I create DCP in 4k?

Hi, I'm pretty new with Premier, hopefully I can explain this well enough. Also attached a clip so you can see it for yourself.I've made a couple videos before without this issue. One this one project I'm working on all of a sudden my clips are freezing on playback. This is from the timeline, not after an export. I haven't tried exporting it yet because it's not done. But the first two clips in the sequence will play, the rest all freeze on the first frame. Each clip is about 5 seconds (it's a drone montage), and in playback you'll just get five seconds of the first frame before it moves to the next clip, you'll get five seconds of it's first frame, and so on and so on. No transitisions have been added between the clips. I've tried rendering, it does nothing. I've tried Googled suggestions of resetting my layout, that did nothing either. Clip is attached of my issue. HELP. And thanks.

Hi, I opened my almost finished project and for some reason the playback speed has slowed down. 1 second in the program is not anymore 1 second. This is not a ram or memory related issue. Every project that I open now plays "slower". Speed in every individual clip is set to 100% and the frame rate also matches the same 25 that I used to film. What have I done and how do I fix that my 25 fps project plays 25 frames in 1 second?

Hiya,Premiere Pro CC2018I work with large projects containing many many many sequences. These are often just varients of the same sequence. In an attempt to streamline the workflow I have 2 questions I was hoping someone could help with:I'm trying to find a way to change the names of multiple sequences at once. Is this possible? A lot of time is wasted by having to individually rename each sequence.Is there a way to change the sequence settings for a batch of sequences simultaneously? For example, change the aspect ratio of 26 different sequences at the same time?Thanks in advance

Bonjour,  Lorsque j'ai effectué mon montage vidéo, le son et l'image n'étaient pas saccadés ni flous. Dès que j'ai exporté ma vidéo, je me suis aperçue que ce problème est apparu. J'ai suivi les conseils prodigués dans cette vidéo : https://www.youtube.com/watch?v=G0D1uCKmNSQ&t=17s&ab_channel=AdobeCareMais le problème persiste. Que puis-je faire pour que le son soit correct ?

I've followed the convoluted work around found in this video https://www.youtube.com/watch?v=KsmBCwRAitg&t=3s. So that my color would match. I was able to render my timeline of on Friday and even export it. However now on Monday It won't render (there is has been no change but yes, I need to make changes). Can you fix the color management between Premiere and After Effects. How long has dynamic linking existed? Shouldn't color management be seamless by now?

Bonjour,Lorsque j’exporte une vidéo depuis Premiere Pro, les couleurs apparaissent différentes de celles que je vois avant l’enregistrement. Savez-vous comment résoudre ce problème ?

Hi,  I am using Premiere Pro 2022, and I put a text /essential graphics object on a separate video lane..... but there's no 'Roll' checkbox, to make it into a credit roll.   See the screen snapshot.   There's only a mask text checkbox, but no roll checkbox. Any ideas? Thanks

I have over 100 images on two tracks and want to widen all of them automatically?

It's very likely there's an automation for this that I haven't found, but I'd love it if I could download an xml or similar file and import it into my sequence.I often work on video proof with upwards of 50 comments, and usually hold the Workfront proof open on a separate monitor as I work backwards through my timeline to avoid messing up my timestamps. Sometimes this isn't feasible (for example working on my laptop without a second monitor, makes it clunky juggling the windows, and manually copy pasting cimments to markers is very time-consuming)If there were a way to automate the import of the comments as markers onto layer 1, it would seriously improve my workflow, and so I'm wondering if this feature or something similar already exists, and if not, weather something like it is in the works?

I tried everything (reset workspace, show audiowaveform, etc) and nothing worked. Why is the 2nd recording shoing the waveforms, but the first one is not? 

Hello,  I'm trying to create an animated timer and every tutorial says to use radial wipe. I have noticed that it is wiping from the lower right instead of going clockwise.  Is there a work around in premiere or a transition that is similar.  Thank you!

This  Adobe transcription and text editing tool is an absolute idiot of software, a complete piece of trash that exists only to waste your time. Every time you try to correct a word, edit a sentence, the  thing doesn’t save, crashes, disappears, and makes you want to pull your hair out. It feels like it was made by people who never actually had to work with video, just to make you lose 100 days on something simple. It’s a glitched mess, disguised as a tool, and anyone sane would go insane trying to use it. It’s frustrating, infuriating, , a nightmare insisting on being called Adobe Premiere, and I swear I’ve never seen software more idiotic and useless for editing text than this.I think I’m just going to stick with my CapCut accountEditing a short sentence is an enormous struggle, something that should be simple. Is it really so hard to make a decent text editing box????????Apaid tool that never updates for the better.I click on the Edit Transcript, I edit it and leave, and when I chec

My main Premiere system is crashing, so I've moved the project to another system.  Now I'm relinking files.HOWEVER, the LOCATE FILE window no longer supports Network Drives or Network UNC paths.  I can relink files from the local disks, but I cannot get it to access the network drives.In Windows Explorer the networked file servers are there and are accesible by clicking on them.  The files are there too.  It's just Premiere absolutely refuses to access the network.Stop breaking Premiere!  It's not any better than CS6, which 99% of people were happy with - except the new Premiere has more problems and you're removing features.  If you donmm't want professionals to use it stop calling it Premiere PRO.