Questions

Has anyone has found lately that warp stabilizer makes a lot of clips worse? I have a shot that barely has any movement to it at all. No camera shake at all. and warp just makes it look more funky. But then I bring it into After Effects and have some success with the "stabilize motion" tracking effect.

I am severely frustrated with premiere right now. I have some presets that I bought. The one I am trying to use is a "glitch" effect/transition, at the beginning of my time line the transition works as it should then 25 minutes into the video they just stop working, even though I have copied and pasted them as described to me in the written tutorial. I have even found the exact frame in the time line they stop working and all other attempts past that frame result in the same issue but before that frame they work as intended. what am I doing wrong, or what happened in the time line. I know in the screenshots it looks like im not transitioning to anything, but that was where I had found the issue starts and persists no matter what after those frames through out the rest of the video. 

I've got a problem I can't seem to solve. I've animated a line in a straight horizontal movement with several keyframes. The object reaches the keyframe right before the last keyframe, but not advance to the last.All keyframes are set to linear in Spacial and Temporal Intrerpolation.This was working for me just a few minutes ago, then I replaced the last keyframe and suddenly it does not advance. So I've done something wrong inadvertenly.I'm attaching two images to show you what I mean.Any help would be greatly appreciated.Thanks.

I've done the in app tutorials before and found them very useful. So after sometime, I've went to load them up again for a refresher in Premiere Pro, and the workspace and project loads up, which you can play around with,  but there is no accompanying tutorial that guides you through. Am I missing something? As I've done it before, is this a one-time use sort of operation?>

Dear all,I work in the field of live broadcasting and use the Capture function in Adobe Premiere to create clips – recording video using a capture card (HDMI, SDI). This feature is only available in older versions of Adobe Premiere (e.g., 23.6.7). I cannot find this version in the Adobe Cloud app (the latest available version is 24.0). Does anyone have a link to this version? Or to the latest version with video recording functionality?   

I have a long video that I break up in to smaller clips - essentially chapters. When I am exporting these out, the subtitle SRT timestamps align with the full original video, not the specific clip I have extracted and therefore do not match up at all. I can't find a way to fix this. For example, lets say I have a 15 minute video and I am wanting to export the middle 5 minutes, the time stamps in the SRT file will start at 00:05:00:00 in relation to the full video as opposed to starting at 00:00:00:00 in alignment with the actual clip I have exported. This seems really silly and I am possibly missing something obvious but are unable to work out why it will not align the timestamps to the extracted clip.  

Hi everyone, how can I record video with my webcam from Premiere Pro? Everyone says I have to click on the "capture" option, but that option doesn't appear in the program.my camera is connected via usb.

I've tested this bug on three different mac computers. We can't get Premiere Pro (various different versions, from oldest 24.0 to newest 25.1) to recognize/import 360 video files. When we go to import the files, the folder where the 360 video files are stored, appears empty. This is true of both insta360 X3 files and X4 files.It's a huge time and energy cost to have to downgrade contractors computers to previous MAC OS versions. I don't know if the bug is on Premiere Pro or Mac OS Sequoia. Really hoping for a resolution soon so I can continue working with new contractors who are on Sequoia.

Ok so I run on Sonoma 14.6.1 Apple M1 Max 32GB. Premiere is working fine I can still edit and all... Whenever I want to export either on H.264 / MOV / H.265 it crashes. Same if I pass trough Media Encoder.One thing I can say it is not related to the fact that I updated to CC2025. I updated to CC2025 because on the previous version it crashed as well. I tried to export my project on a windows computer, it is working fine.In fact any project that I want to export from my mac crashes now. Any help or workaround ?

I work with very long source files which I put into nested sequences before working with them in my timeline. I'm wondering if there's a way to use the Show Duplicate Frame Markers for these sequences in my timeline.  

After Effects and Premiere Pro crashing at launch (V25)My set up is an Imac Intel with Ventura. I tried Everithing, desinstalling and installing back the softwares, update the OS, Clean with Adobe cleaner tool, erase caches... Premire Pro launches when I force it withe "Option+ Shift" but I can't use After Effects at all.I have a project due for tomorrow and I can't find a solution... If anyone has an idea, it would be much appreciated, please 🙂

Hello all! Thanks to an interesting question from a PPro scripter, I've written some example PPro ExtendScript that extracts the dimensions of a projectItem.      var kPProPrivateProjectMetadataURI = "http://ns.adobe.com/premierePrivateProjectMetaData/1.0/"; if (ExternalObject.AdobeXMPScript === undefined) { ExternalObject.AdobeXMPScript = new ExternalObject('lib:AdobeXMPScript'); } var firstItemInProject = app.project.rootItem.children[0]; // make sure first item is media. if (firstItemInProject) { var projectMetadata = firstItemInProject.getProjectMetadata(); if (projectMetadata) { var projectMetadataAsXMP = new XMPMeta(projectMetadata); if (projectMetadataAsXMP) { var dimensionsFieldName = "Column.Intrinsic.VideoInfo"; var dimensionsInfo = projectMetadataAsXMP.getProperty(kPProPrivateProjectMetadataURI, dimensionsFieldName); if (dimensionsInfo) { var widthArray = []; var heightArray = []; var dimensionsVal = dimensionsInfo.v

Cannot do any work in Premiere and other adobe apps, mostly need premiere.  No issues with da vinci but prefer pp as using it for over 10 years..  3090, w 10 home, 32 Ram, 11 gen cpu.  Adobe errors messages incorrect about clock issues and other  adobe " errors"  that do not fit reality.  Tech support does not correct any of this.  Need help.

I have been getting an error message when trying to export my project out of premier. The rendering progresses to about 50% then the error message appears. I know I have enough disk space as i have tried exporting to several different places, all that have more than enough space. I was able to successfully export the project once as a rough cut but after making changes have not been able to export it. The only major change from the original export is that i applied warp stabilizer to several clips. There seems to be one clip that is causing the prolem. I am able to export clips before and after the clip in question but if i try to export this clip, the progress bar does not show and change even if I let it render for a whole day. Ive tried removing the warp stabilizer from the clip, changing export settings, deleting and adding the clip back to the sequence, and opening the sequence in a new project but nothing has worked. Short of scrapping the whole project and starting from scratch

Hi, I've figured out how to get 4 tracks of localized audio to be selectable in a player, but I cannot figure out how to get the names of the audio tracks to carry through to the player. The audio filenames are ENG, ES, JA, BR_PT, and their metadata tile matches. Imported those to Premiere, did not drag n drop Audio tracks in the timeline and in the audio track mixer are named the same   I've tried this a few times in the past, this is the furthest I've gotten with it, and it works -- just cannot figure out how to get the names to carry through to the player.   Any suggestions/ideas?

I've found a couple similar threads from several years ago that talk about this issue, but no solutions have been offered up. I'm hoping to figure out why this is happening:When working in a Premiere timeline, my color labels are disappearing. I use colors to organize my footage, and having an entire timeline default back to the "Iris" color can be very frustrating. I can fix this only by digging into my Autosave folder and pulling up an older version of the project, and hoping I don't lose much work in the process. Even then, the labels continue to disappear randomly. My best guess so far as to when this happens is when I switch between Workspaces. However, this isn't consistent--sometimes it simply happens when all I do is click on my Project window. It can also happen when I duplicate a sequence. When it does, hundreds of color-coded clips just instantly pop back to the "Iris" color, and ruin many hours of labeling work.Obviously the quick solution is to never use the color coding a

This happened last year same time and they fixed it after many months.  THEY FIXED IT.  Now with update on May 3, it is back with all footage types.  No other issues with other programs or with computer.  Cannot waste time with months of their excuses. need it to work, prior to May 3 no such issues this year. Same footgaes/media should not be doing this. Thank you.

Hello, I signed up for Adobe Creative Cloud in June 2025. The email address I used was "22296894@baskent.edu.tr," but the university deactivated it and it's no longer available. In August, I couldn't access my account or use Adobe programs. I signed up again with a new email address: "22296894@mail.baskent.edu.tr." You can see that I registered with this email address. The account membership associated with this email address, "22296894@baskent.edu.tr," is still active, but I can't use it, and the membership fee continues to be deducted from my account. Please help me cancel my membership associated with this email address: "22296894@baskent.edu.tr."

I am an Apple Macbook Pro user. I keep getting this error when transferring a PRIVATE file containing camera footage with .MTS video extensions. 

Hi,I am attempting to transcribe videos. With every video done through a soundboard it's the same issue.It will not transcribe. It just produces the odd word. Has anyone had that issue? Is there a way to fix the current video and/or are there special settings within the soundboard? See attached screenshot.      

What is particularly annoying is that opening projects I was working on, which were fine, suddenly require AE25 to "successfully import" the file.  Before they worked.  And I have AE25, however when installing it, I requested to keep the old version too, just in case some things didn't open properly in the new version (which has happened to me before with old compositions that then took weeks to sort out...) So PP is now unusable with AE content for me.What to do?

Introducing more than 90 new effects, transitions, and animations in Premiere Pro | Adobe Blog So these seems like big news! 

I have a scene I shot in a car where I tapped green poster board to the windows to so I could make it look like the car is driving. The problem is there is some green light reflecting off the poster board into the car. So besides the actors everything in the shot has the driving footage over it. I was wondering if there is a way in post to reduce the green reflection or make it so the background footage stays only in the car windows.

Has FE.AllowMultipleOpenProjects been brought back yet?Need to know if they've fixed their 'multiple project open at once' mistake. cheers

I've seen a couple of old threads on similar issue but wondering if any newer solutions based on most recent versions. I am experiencing an issue with Premiere changing the LUT on my projects. My main issue is not always remembering which LUT I was using prior. Which causes a major headache of course. Any way to recal the orignal LUT used or how to best prevent this? I've read some saying this may happen anytime new LUTs are added?