Questions

I have implemented Keycloak login on my panel using oidc-client-ts. Everything was fine until I realized that the installed version serves the panel directly from "file://", which as it looks, Keycloak does not allow as a redirect URI.Has anybody made Keycloak integration work with Premiere panel? Can you share how you did it?Thanks in advance.

I recently updated to the newest version of Premiere (25.6.2) Now, when I try to open a project that existed before I updated, I get the message "This project was saved in a newer version of Adobe Premiere Pro and cannot be opened in this version." This is not possible, since I am working with the newest version of Premiere. I even tried going backwards and re-installing an old version, then re-installing the newest version. That did nothing. I can't access my project and I'm not sure how to fix this. 

J'ai la version 25.6.2 je n'arrive pas à ouvrir un projet pourtant déjà travaillé sur cette même version. Ce message apparait alors : "ce projet a été enregistré dans une version plus récente de Adobe Premiere Pro..." à l'aaaaaiiiiide !!!!!!

Hi! I am a DaVinci Resolve user and recently purchased a software package and am currently learning Adobe products.This problem haunted me in DaVinci, it is also present in Premiere Pro. Maybe I did not set the color space correctly. Please help me solve it.In the screenshot, I marked where the original video looks and you can see the difference in color saturation and overall brightness between the view inside Premiere Pro. I cannot accurately adjust the brightness and color saturation because after exporting to a file, the video will be less saturated than it was during the editing process. This also applies to light. It is important to adjust so that when editing the video I see the real color and light, what it really is and what it will be after rendering.This video was shot on a Pixel 8 Pro, 4K 60 fps, 8 bit.I need to figure this out so that in the future I know how to adjust the color space for editing video from other cameras.Thank you, with respect!

So... seems inputting a number w/ 3 digits implies the 1st digit is seconds, and the other digits are number of frames? E.g., in my sequence @ 25fps, inputting +231 results in jumping forward 2s + 31f.. which is 3s + 6 frames How would explicitly move forward 231 frames without having to math first? 

Dear Users, I am facing an issue with Adobe Premiere Pro. Yesterday, I edited and saved a project file. Today, when I try to open the same project, I am getting the error message:“This project was saved in a newer version of Adobe Premiere Pro and cannot be opened in this version.” I tried the following steps, but the issue still persists:Uninstalled and reinstalled Premiere ProTried opening from Auto-SaveRestarted the systemStill, the project does not open. I am attaching the screenshot of the error message for your reference. Please help me recover or open this project file. It is an important work file. Thank you,K. Ragavendran

Currently, if anything happens that Premiere doesn't like, it just instantly crashes. Resolve RARELY does this because the code in the backend is MUCH better, obviously. There needs to be a way to prevent crashes built in, so that if Premiere gets stuck doing something, it knows what to then do automatically to prevent a crash; either by undoing the issue that cause it to get stuck, or by forcing Premiere to jump to a safe state and inform you of the issue + sending an automatic crash level report that the Premiere team then takes very seriously (As a top priority). So the idea is for the Premiere team to focus on stability to prevent crashes so users can continue working. (This is what a professional editing program offers.) Either do that, or reduce the price to FREE because Premiere in its current form is not a professional program with how often it has bugs, and crashes.For example, I've been experiencing the exact same crash bug for a year, from version 25.0 to the

Idiot here:"next" button is missing from Welcome to Premiere Pro tutorial. 

I am using Premiere Pro 25.6.2, an Nvidia 1070, Windows 11 Pro, Intel i7-9700K processor and 32 GB Ram.Whenever I open an extension, the panel is undocked and blank.  The contents of the extension are affixed to the upper left corner of the screen and I cannot select anything.  This happend in the Beta version too.See attached image. Any idea what the heck is going on?

I will admit that I'm new to text-based editing here, but I've watched dozens of tutorials and went through settings over and over.  I have a 30-min interview. My settings are to transcribe when added to the sequence. I did that, and it transcribed the interview. All good there. I know it's a text-based transcript, not a static one. I click all around the transcript, and it updates in the sequence. But if I highlight anything in the transcript, it does nothing. It doesn't delete from the transcript, it doesn't delete from the sequence. I can click the "edit active text" button and delete from the transcript that way, but it doesn't affect the sequence at all.  I'm stymied. I went through step by step what it says in the tutorials, and nothing lets me edit the text and have it update the sequence. I have found zero answers to this in the community history, so I'm sure the issue is me, but I am at a loss for any other techniques other than the old school method of wat

That gray bar on the right side is a white matte. The original footage had to be reframed, so the matte is there to fill the space. Both the matte and the background in the clip are pure white (#FFFFFF)There is a slight gradient in a layer over the entire frame. It's at 25%, set to MULTIPLY blend mode. As you can see, even though the bg and the matte are the same colour, the overlay isn't being applied uniformly across the frame.This is a project from 2016 (maybe 2018?) that I've been tasked with updating. There are 900+ shots like this, so ideally the fix is just a setting that I need to change somewhere.I've already tried nesting the matte and the footage, but no luck. The footage is REC 601, so I tried changing the colour space of the footage, the matte, and the overlay, but again it didn't work. Any help is appreciated. Thanks

書き出しの際、字幕が消えてしまいます。書き出し設定をいくつか試したところ、QuickTime ProResなど、特定の設定で発生するようです。h264にしたところ字幕が現れました。 25.6.2 (ビルド 1)macOS Sequoia 15.5 Subtitles disappear when exporting.I tried several export settings and it seems to occur with certain settings, such as QuickTime ProRes.When I switched to h264, the subtitles appeared. 25.6.2 (Build 1)macOS Sequoia 15.5

Hello, I am trying to edit clips in Premiere Pro and my footage has a blueish green tint when editing. I tried with other footage and that footage is fine. However, I have about a hundred clips that have this bluish green tint when editing. When I export the clips, they end up really bright and their color is still off. I am getting a notification when going to export that says "Source Color Space (Rec 2100 HLG) cannot be exported with current export settings of the selected format. Export color space (Rec 709) will be used instead. Update the videoo encode settings to export in source color space." How can I fix this? I have tried a lot of solutions that ChatGPT has given me but none of them are working. Does anyone have any recommendations? 

ok i know ive had this issue before but, i was using the simple trim tool "the red one" and i was able to trim and extend over other clips, now i cant and it states "trim blocked" blah blah blah, and i forget how i fixed it last time, i checked the other posts on here saying "you cant trim or extend over other clips" but i have been doing that exact thing for about a week, i have checked my prefrences and they are all correct, please help, i cant live without my simple trim tool, i can provide video and screenshots if needed, i am on version 25.5

When starting premiere pro, a small window appears that says initialization and then starts project... it flies by quickly so I can't take a picture of that window...I haven't noticed that until now... does it appear to anyone else and what does it mean... and is it some kind of error, is it good or bad... thanks Pp 25.6.2Win 11 25H2 for Worstation Everything is fresh inastall...

I just updated to the latest Premiere, 25.6.2   But I am no longer able to open the files I was just working on minutes prior... 

I have a script created in Excel with start and end time column values that should be compatible with Premiere (e.g., 00;00;12;24), and a column with the corresponding verbiage text for each segment. Is there any way to have this loaded into Premiere to create an artificial voiceover at those in and out points without using a mike, and then create captions from a transcript of it?

Hi.So, I've replaced footage with After Effects Compositions.I decided I wanted to make some tweaks to the graphics I made, but those changes won't appear in the Premiere Pro timeline, and instead show the old version.I have tried relinking the media, restarting both Premiere and After Effects, and even creating a new Save File of the After Effects compositions and linking to them instead, and it still will only show the old version. Both Premiere Pro and After Effects are up to date.My device specs are as follows:Macbook Pro 15" 20182.6 GHz 6-Core Intel Core i7Intel UHD Graphics 630 1536 MB16 GB 2400 MHz DDR415.1.1 (24B91) I have one other issue that's more managable, but I figure I should share that too in case it's relevant.Within the Premiere Pro timeline I have four linked After Effects sequences, which are all in the same Save File.For some reason, every time I make a change in After Effects or open Premiere, one of the four sequences unlinks itself. TIA Any i

I have multiple clips from a recent production including footage from a Sony FX6, FX3 and separate audio files. A professional sound op had timecode sync'd both cameras to their audio files, which checks out according to the metadata in Premiere.  But when I highlight all the clips in the bin and 'create multi-camera sequence' and set the sync point to timeode, it says failure to sync one or more clips because a match could not be found. I've had this issue before and never resolved it but at the same time, I regularly shoot using these cameras for other companies who never have an issue syncing them up, which leads me to think the cameras are fine so it must be a setting wrong on my computer? Any ideas?

Since last week i get the Info as shown ion the attached Screeshot in my source window.How dio I get rid of it?Note: The attachment has been removed by Mod to protect privacy

I have a template premiere porject file that I use as a starting point for all of my wedding video edits. I have a collection of Sequences premade and named, ready to export. I have BRIDEANDGROOM in the text name of the Sequence. Right now I manually replace this BRIDEANDGROOM piece of text by typing out the couples name, Copy, highlight BRIDEANDGROOM, Paste to replace. This is a reptitive and tedious task at the start of every new wedding edit. Is there a way in Automation Blocks, or in Premiere natively, to "Find and Replace" text in the name of Sequences, similar to what can easily be done in a Microsoft Word document? Ideally, find "BRIDEANDGROM" everywhere it occurs in all of the project's Sequecnes, and replace with for example "Alice and Bob"

Lenovo LaptopWin 11 Pro32GB RAMNVME 1TB SSDRTX 4050PrPro 25.4/25.5/25.6 (all tried)Scratch drive is external USB-C SSD 2TBI have a project that I have been working on for 7 months now.  All was fine until yesterday when my project suddenly would not allow me to add videos to my sequences.  Only the audio appears in the sequence.  So to be very clear, When I grab a video asset and drag it to the timeline, the audio portion appears in purple moving left and right until I place it... but the video portion does not appear at all, I get the red circle with a slash through it in the video layers.  This happens with ALL video assets.  All existing videos work and play just fine.  I can add images, audio, anything except the visual portion of any video.  All assets can import into asset panel just fine.If I go to any old project, they all work just fine.  If I create a new project in a new folder, it works just fine.  If a create a new project in th

Hi I went to open a premier pro file I had been working on the day before and it won't let me open it. A message comes up saying it was saved in a newer version. I am trying to open in the newest version of Premier Pro ( the only one I have had downloaded to my laptop). Does anyone know why this is happening as I have only had one version of the app on my laptop.  Thanks in advance 

プレミアで以前保存したテキストスタイルを適用しても、別のフォントで表示されてしまいます。

Hello,I'm working with a Wacom Cintiq 24HD with a pen (and Win 11 Pro) and in every Adobe program I have no problems with using the pen. In Premiere 25.6.2 the pen wouldn't work correctly. Is there somewhere a box I missed to check that allows working with a pentool?Thankss.