Audition

Good day. I don't do much AV editing (I'm a still image guy), but I'm wearing a different hat this week for our small organization. I'm combining music with narration for an illustrated oral history project. I've been doing the audio work in Audition, and I'm working with CS6 since we already own a license for this. With both tracks loaded into a multitrack session, I can't figure out how to selectively adjust volume for the music around the ebb and flow of the narration (I could switch to the waveform editor, but timing this against the narration would be clunky at best and of course destructive). Though I've done multiple web searches and can see how to adjust volume for a track over an entire clip or fade in/out at the beginning and end of the clip, nothing I've found indicates a way of doing this selectively, within a clip and within a track. Can anyone turn the lights on for me here? I'm grateful for help with this.

Hello,i want ask if thay are any news about adobe voco?Thanks.

Hey there!I've been using Adobe Audition for years and absolutely LOVE it for my voice over business! I do have an issue though.  I have a new computer, and I am attempting to download and install creative cloud and audition. Unfortunately I have found that the installation will get to a certain point and just freeze. Like the installer itself doesn't freeze, but it will sit for hours at 18.7% (for example) until I restart it all over again. I had problems also when trying to download it onto another computer for my assistant editor. So now I'm wondering how widespread these issues are, and if anyone has some quick tips to resolve it? It's not that I CAN'T spend 4 hours on my Sunday afternoon trying to simply download a problem, I just don't want to LOL!Let me know what your thoughts or helpful tips are 🙂 Thanks in advance!Megan 🙂 

I am NOT an audio person, but trying  to get the basics.I am using the Behringer (trying at least) to record to Windows10 using Audition.Here is what I am trying to do.  I want to sing to a music trax and record that.I have used many variations in the setup through Audition.  And nothing seems to work.I am running a set of headphones into the Interface.and Behringer UltraVoice microphone.Like I said can someone guide me on getting started?Like I said....a complete idiot to audio equipment. Thanks to one and all.

Hi Support community,Apologies if this has already been solved, I was unable to find any posts like this.So I have several .sesx files that I saved when I was doing some editing, and when I open any of them there is no content. I dug a little deeper and saw that in the code for the .sesx file itself the <files/> section is blank, and it consists of only a <files/> (there are 600 lines of other code though). Did I screw up when saving the file? I'm at a loss of what possibly could have happened, and I have a hunch that all of my multitracks are unusable now. Any help would be greatly appreciated.

Hi, We are a news and music station that recently upgraded to Audition CC. Traditionally, because of the way our reporters edit in multiple locations/studios, we have edited audio directly from a network drive. Since upgrading, we have had multiple sessions become corrupted while the reporter is editing - unfortunately sometimes not to their knowledge until they have saved, or had not saved prior work, so all is lost.  Is this a known issue? Any guidance would be greatly appreciated.  

I'm admittedly new to this program, I haven't ventured much out of Premiere and Photoshop so excuse my ignorance. During a recording, some of my audio suddenly becomes very tinny and scratchy when the volume goes higher. My assumption is that this is just a recording problem and I won't have any luck trying to fully fix it, but if anyone has any suggestions as to how to make it a little more listenable, I would be grateful. Here's a clip of what I mean: https://youtu.be/B4TNAsZ7z2g Thank you for any help you can provide!

After updating to latest versions on both Premiere and Audition, I can't get Audition to open see the file I am trying to edit from Premiere. When I point out a clip, and click on "Edit in Audition", The program starts up, but before it is fully loaded, premiere says "Render and replace". Then It creates a rendered file of it self in the Project browser in Premiere Pro. And when Audition finally is loaded, it is empty. No file loaded.  What has gone wrong? 

Hello there, I tried to edit an audio Clip in Adobe Audition from the premiere Pro Timeline but It didn't work. No clip opened into Audition. ALL the apps are updated.My Computer is a Mac Pro (late 2013) with MacOS Catalina 10.15.132BD ram 1866 MhZ DDR3AMD FirePro D500 3GB graphic card. Thanks for helping! BestGraziano

Hello, Since update to Adobe 2020 I can't no longer Generate Speech. Before update not a problem. The box opens, but as soon a change from "male" to "female" Audition freezes and can't be opened again until I restart the computer. I'm on a Macbook Pro / High Sierra

Hello! I recently bumped into some really weird problem. I made a favorite preset wich is puts 1.5 sec silence to the end of the file. It works in the waveform editor without any issue: Id like to use this preset in batch process. And the problem is as shown in the picture the waveform is cut off. Did I made a mistake or is it a bug?    Preset looks like this:   Thanks for help! 

I have a mixer and I have the output connected to the input of the computer. If I record speech on a mic on one of the channels, it records perfectly in Audition. However, if I try to record what ever is playing on my computer speakers, just static or a buzz is recorded in audition. I tried connecting the output of the computer to the input of my mixer and see that the mixer is receiving audio, but Audition still does not. I saw on here a product called VAC, so I installed it, changed my preferences in Audition, but still nothing.

I have audio clips with different volumes. I'd like to make them the same. Wow, has this been hard!  Well, it seems doable using the Speech Leveler effect. However, when I use that I find that I get such loud breaths in the result that Noise Reduction can't remove them without excessive distortion. Any hope? I also see that I can pull up the yellow volume line of a clip to change its volume. That seems like a crude, awkward method. But it doesn't seem to add distortion.  In the pursuit of equal volume I've tried to learn how to determine what is the numerical volume level or average of a clip. I've used the Amplitude Statistics button to take readings of clips. I can get an Average RMS value by doing that. It seems like these numbers vary quite a bit each time I re-scan a clip or audio selection! And that number doesn't seem to be very useful for helping me make 2 clips with different volumes have the same volume.  Anyone have a link to wonderfully he

Audition CS6; adding wav files [48KHz, 24bit] into a multitrack session [32 bit mixing].Clips [files], but not all,  that have played properly in this session, now play very distorted, and at full [or very nearly] level.We have gone back to the previously exported * session to recover and re-edit, but we really don't want this happening again.( * I tend to do File, Export,  Session...  (having previously checked the box in Preferences to 'Associate all fiels with the session' [whatever] ) so that Audition creates a folder with all the needed files for that session next to where i save the session .sesx file.  )Any and all ideas please!ThanksJohn

...It's looking unlikely. I have a nicely sound-damped space in the basement to record. But our house is old and when anybody walks around upstairs I hear floor squeaks. I thought that kind of sound could be removed but that now seems unlikely. When I use noise reduction processes enough to remove the squeaks the process also removes the quality of the narration... I've been trying both Noise Reduction and also the Dynamics Autogate. When NR is used enough I get a huge amount of that hollow "bonging chiming" sound. Autogate removes squeaks between sections of dialog and still preserves some quality but then all sound between words disappears and it's unnatural. And squeaking within dialog remains, which sounds bonkers. I was able to remove steady background sounds and mic hum very well and was even able to diminish breathing so it wasn't prominent but still was present enough to be natural. And the file still sounded good to me. So I was good to go ... except for clunks

I was listening to a file and it's good. Then somebody turned on a water faucet and I heard the water running. In the spectral graph I saw the water flow start -- there it is, a band of sound going through the narration. I wondered, Is there a way to remove that band without removing the voice that it's going through?  Since this was a constant sound I think I pretty much figured out how to remove it without hurting the rest of the sound. I used the Capture Noise Print and NR process. I think it worked!

Hi... I'm prepping audiofiles for my first audiobook. I'm learning about the RMS and Peak and other ACX requirements -- I think I have a handle on those. I'm having more trouble with noise reduction. I've read here about leaving some breaths since they're natural. But I do have some mic hum. And I recorded in my house in a padded area of the basement, but kids were sometimes upstairs and some clomps and creaks got in. I don't mind having some little things here and there in the recording -- i'm not ashamed that it's amateur. ...But it wd be nice to remove mic hum and big clunks, breaths and mouth sounds that are obtrusive. While maybe just lowering some of the natural background yet not trying to totally remove it. Anyway, those are my goals. When I google this subject I find a link to a Audition forum/community article titled "Workflow for noise reduction and speech volume." Sounds great but it seems to be gone -- part of the old forum, I'm guessing. Any new link? I'm learni

I have been using Audition CC 2019 for a few months.  Today, I recorded a voice over for a podcast and started to mix and master.  I was hearing a lot of sizzle and pops.  I thought at first that it was a mic issue.  I tried to use DeNoise & DeClipper, but I still had issues.  I uploaded the file to drive and listened there and no issues.  The issue seems to be isolated to playback thru the software.  Anyone else run into this and can help us figure it out. Thanks!

I've been having a constant struggle with Audition and my current microphone setup and it's driving me up a wall so hard I'm already considering quitting using Audition if I can't fix it soon. The program regularly boots up with an error message saying that my audio hardware settings need changing due to different hardware, even though I haven't unplugged anything unless I'm packing it for a recording session away from home. When I edit the settings, it says that my Behringer UMC202HD is "not working" even though I can get audio through it and Audacity will recognize it as a working microphone. I know for certain that the drivers are up to date because I went out of my way to install it and I've checked the Device Manager on my PC to make sure that there aren't any problems with the drivers. When Audition does recognize the audio interface as a working input, it will let me set the proper inputs for the recording tracks, but it won't allow me to record at all. The red line re

Audition ran on my old machine, bought new laptop and it will not run after launching, get no screen but if you try to re launch, it thinks it is runing. On the support page, it says to download a text file, but it is not there, Here is the page link. Runing Windows 10  https://helpx.adobe.com/audition/kb/audition-cs6-crashes-launch.html

Is there a way to see the individual files in editor view automatically as they are individually processed while running batch processing rather than have to double click on them?

Hi guysI have recorded my first podcast on a Zoom H6 using 2 PodMics and XLR-cables. The sound on each of the tracks is good - until I make a multitrack and place the two mono-tracks under each other. Then the sound is suddenly noisy and only gets good, once i mute one of the tracks. Does it makes sense? And what do I do wrong?//Martin

Hi,I just bought a Forcusrite Scarlett 4i4 Interface and I am completly unable to make Audition and the interface working together.I choose Scarlett in the Hardware material in the preferences in Audition, but I hear nothing and when I try to record, my mike is not working, no soundis recorded.Can someone help? (Also sorry if I make some english mistakes, my first and main language is french).Great great thanks at advance! 

Hello there,To Adobe Audition Devs:Can you guys make it happen for the next update, before the grandiose era of 2020?I believe it was requested several times.(Needless to say, it's been there for many years in other DAWs / Audio Editors)If not for us, do it for the sake of old timers from the Cool Edit Pro era![They waited long enough, didn't they :)]Thanks in advance.

Loading the input/output device failed (MME internal error) upon start on version 13.0 but strangely don't have any problem with version 12.1.5 On Window 10, Creative suite, student version