Dimension

Hello,I am trying to upload an adobe dimension 3d model to my Shopify website. The file size has to be 15MB or less, and my file is 35 MB. I can not seem to figure out how to reduce the size of the file. I have tried to scale the item, change the canvas size etc. Any advice would be appreciated.  

El programa se queda cargando en la sección de inicio, puedo seleccionar un archivo para abrir pero se queda pensando y ya no sucede nada.Hago click en archivos recientes y tampoco puedo abrirlos, tampoco creando un archivo nuevo.No puedo ni cerrar el programa de manera manual, tengo que hacer force quit. Ya intenté desinstalar y instalar una versión anterior y pasa lo mismo, sigue sin funcionar.

when I open the Adobe Dimension program (MacBook Pro, an initial dialog box opens, and when I want to open a file or create a new one, the panel gets stuck, the wheel spins, and the program does not work.It works before and on the some moment it stopped working 😞 Please advise? Thank you very much.Just stuck 😞Help please with this

Hey guys, I would like to thank the team behind Adobe Dimension.  As someone who is busy day to day job (I work in UI/UX and I mostly use Adobe Dimension at night time for packaging freelance works), I find it difficult to do a lot of processes in terms of texture mapping and rendering as other software does. I stopped using a render engine (like Vray) since Adobe Dimension does everything in whatever I need for the packaging process. Kudos to Dimension team!So as I have already done more than 50 packaging works and I realize that it would be super great if we can add sticker mode for the packaging process. Let me explain. When I am doing label design, as everyone does, we will drag the artwork directly on the surface of the box/packaging. However I wish that we could have a height map or default sticker mode so that the sticker we apply will at least has some depth on the surface. Let me know if this is possible!

To import into Dimension, or I can create a 2D object with the views, Front, Left view, Right and Bottom and convert to 3D. For example in Illustrator and save in .OBJ?How can I create a 3D base?

There is a problem that the decal does not appear when I import the sketchup file into dimension. How can I solve this?There was no problem before the update, but it seems that there is such an error after the update

hello! How can I realize a spiral with Dimension like picture attached? Tks for answers.

Hello, This is my first time posting in the forum, so apologies if I've done so in the wrong section. I've recently started to use Dimension for some larger interior scenes, but I'm often experiencing noise which I can't seem to overcome. I've included a couple of example images in this post. The first is a clay render, in which everything seems fine, of course. The second is a complete render with materials, and you can see there are sections of noise. This is a CPU render. I can use GPU rendering in Dimension, but on larger renders it just errors out and reverts back to CPU for reasons I'm unsure of. Does anyone have any idea what might be causing these noise zones? Any assistance would be greatly appreciated. Furthermore, if anyone has any knowledge or experience of GPU rendering problems in Dimension, I would appreciate some input. I'm running a GTX 1080 Ti.  Regards,David

下載更新新的Adobe Dimenision後，開啟新增檔案，一直轉圈圈（至少30min以上）；也試著照著無法開啟的步驟，關閉電腦後重新開啟，卸載Dimension再重裝，還是無法開啟..... 大家有遇過一樣的狀況嗎（有試過照下面的步驟重開但還是一樣）https://helpx.adobe.com/tw/creative-cloud/kb/creative-cloud-app-doesnt-open.html 

When I copy and "paste as instance", I can change the material, decal, etc of one object and all instances will reflect the change. If I resize or scale the object, the instances do not change, only the one selected object changes. I have 64 placed instances. I want to make each one smaller in the "x" dimension only while keeping them all in the same postion. Is this possible?

Was able to successfully create a 3D pack in Dimension that looked great in preview but when I went to render the colors were completely blown out. I tried several different lightings but nothing delivered on the preview. Thoughts?

I am getting the same problem that other users reported: I was working normally with Dimension, but from some weeks on, suddenly I can't open saved files, neither create new ones, nor run the interactive courses. In fact, once open the app, it does not close, I have to go through the task manager to end up the app. The rest of Adobe CC installed apps runs normally. My computer fits all the requisites to run Dimension (and it did it, until it crashed), and I reinstalled both Dimension app and the whole Creative Suite.I've not seen any answer to other users that suits my problem... Please, help!

Hello, if I try to export a GLTF, the result are three files.- filename_binary.bin 37,6 MB but I can’t open it.- image folder- filename.gltf but has only 17 KBCan anyone help me? 

Adobe Dimensions - I'm suddenly forgetting how to "cut hole" in a 3d object.  for example:  cutting a hole that passes through a sphere (or a cube, etc).   I recall that the steps included- grouping the objects (for example, a sphere, with a cylinder that passes through the sphere)- then applying a mask, or some other effect, to "hide" the cylinder. the effect I'm going for is to subtract the cylinder shape from the sphere, so that a "hole" is cut through the sphere. frustrating... I recall beiing able to do this before.  but can't remember and can't find previous tutorials thank you!

GPU rendering is turned on in preferences, yet my GPU doesn't go over 10% utilization even for renders taking around 9 minutes. The temperature of the GPU does climb about 20° C during the renders and the clock frequency ramps up as shown in MSI afterburner, but the task manager window never shows more than 10% utilization the whole time. I've seen comments like this for premiere Pro and After Effects going back at least two years in the Adobe community forums, but I have yet to find an answer as to why this happens, or how to fully utilize the GPU. For reference, I am using a TUF 4070 TI with a 5900X and 64GB 3200MHz CL 16 RAM. Your assistance is appreciated.

Dear all,We are looking for a 3D tool that would allow us to add artwork onto packaging items but, most essentially, that allows to export 3D interactive PDFs so that we can move the item around and check it out from all sides (like IC 3D does, for example).Do you confirm whether we can do it or not with Dimension? If not, do you believe it is going to be possible in a future update?Thanks for your help.

Hi everyone,I'm trying to export my Dimension object with all the textures to After Effects Beta and animate it there but I can't find a way to do it. I tried exporting as an .obj but AE doesn't render the textures the way Di does, eg. glass texture).  I also tried uploading the object in the Cloud Libraries but I cannot past the object in AE. Other elements in the libraries from Photoshop or Illustrator can easily be open in the AE composition but not luck with the 3D elements from Dimension.  Can you offer a solution or alternative where I can create a very basic animation where I can keep the exact textures from Dimension? Much appreciated!

I am creating an art gallery in adobe dimension. But when I create a public link, the panning or zooming action takes the viewport beyond the wall of the gallery. It passes through the walls. How to restrict it within the confimed space? 

Hello, i want to render glass with reflection, I put glass and a vertical plane with  leaf image for the background. i want to render just glass with leaf reflection without vertical plane. how to hide background when rendering?

I am new to Dimension. I used it a few years ago but am just getting back into it and now see there is a whole suite of additional apps. I find them all really confusing...like shouldn't they just be one app in total? but just want to do a few product mockups so DN is fine for me I think..(I also only get the stager and other apps and not the material library included in my school subscription)   I downloaded a basic model from stock and uploaded it to DN but the color of the mateiral is not right. Is there not a way to adjust like the color/opacity of the materials? 

Hi,I have a problem and I can't solve. When I place the graphics on the 3D model in Dimension (Version 3.4.9), they look pixelated and blurry. I prepare the graphics in Illustrator or Photoshop. I have tried all kinds of DPI options (72-300-600 DPI) The 3D model looks fine, but the graphics on it are terrible. I have tried everything, but without any result. The system I am using is Mac Mini M2 Pro. I am attaching an image about the subject in the attachment. I would be grateful if you can help with the solution.I. Erol 

when I open the Adobe Dimension program (MacBook Pro, an initial dialog box opens, and when I want to open a file or create a new one, the panel gets stuck, the wheel spins, and the program does not work.Please advise? Thank you very much. 

I cannot even use Dimension on my Mac. Just opens to the main tutorial screen and then crashes.here is my system info;MacBook Pro (16-inch, 2019)Processor: 2.4 GHz 8-Core Intel Core i9Memory:  32 GB 2667 MHz DDR4Graphics: AMD Radeon Pro 5500M 8 GBMac OS: 11.0 Beta (20A5374i) Main Crash log below. Please help! Process: Adobe Dimension [59411]Path: /Applications/Adobe Dimension/Adobe Dimension.app/Contents/MacOS/Adobe DimensionIdentifier: com.adobe.dimensionVersion: 3.4 (3.4)Code Type: X86-64 (Native)Parent Process: ??? [1]Responsible: Adobe Dimension [59411]User ID: 502Date/Time: 2020-09-29 17:24:26.712 -0700OS Version: Mac OS X 10.16 (20A5374i)Report Version: 12Bridge OS Version: 5.0 (18P50380a)Anonymous UUID:Sleep/Wake UUID: Time Awake Since Boot: 80000 secondsTime Since Wake: 2600 secondsSystem Integrity Protection: enabledCrashed Thread: 0 CrBrowserMain Dispatch queue: com.apple.main-threadException Type: EXC_BAD_ACCESS (SIGSEGV)Exception Codes: KERN_INVALID_ADDR

It seems to be about every other OBJ file i need to render will not use the GPU.I have sent in emails previously with no response. Ideas?

Hi, I wanted to know if it was possible to download the file generated from the public scene, in order to be able to manage it independently or to be able to move it to our website. THank you