Photoshop

Even though I left 250GB of free space on my Mac, Photoshop still says the scratch disk is full when I’m only working with 30–40 photos (~50Mb/photo).   Indeed, when I checked, the hard drive was full. But once I closed Photoshop, my Mac had 250GB of free space again. It's so annoying!!! Please help me.

Usando o programa com documento em aberto (16GB) RAM e quando eu fecho, fica na área de trabalho normal mesmo assim ainda consome 16GB de RAM, e só aumenta a cada documento aberto, não diminui nada. tem como resolver? Dados:Meu PC: Processador AMD Ryzen 5 5600 6-Core Processor 3.50 GHzRAM instalada 32,0 GBTipo de sistema Sistema operacional de 64 bits, processador baseado em x64Caneta e toque Nenhuma entrada à caneta ou por toque disponível para este vídeo Photoshop: Versão Adobe Photoshop: 26.5.0 20250318.r.16 0a154be x64 ( Ainda precisa do informações do sistema do programa? )  1º Foto: Quando abre o Programa, 2º Foto: O máximo quando é exigido mais não diminui esse valor pra bem menos, tem que reniciar, por que pode travar o sistema do PC, mesmo fechando abas do programa deixando apenas na aréa de trabalho.

It must pop and use either colours white Teel andktm ofremd

This file was downloaded from freepik. What is the purpose of the top layer? Without this layer file will remain the same.  [Shift+Double click on this layer icon] open a new window of this layer in grphic area . File is uploaded as well.Stone Folder  

I believe this problem started with version 26.4.Step by Step Example:-Open a JPG file-Double-click on the Background layer to convert it to a named layer, click OK-Open the Camera Raw filter and make significant changes-Pressing Ctrl-S to save should not override the original JPG file. It should ask me to save as a PSD since it has a layer. Photoshop version 26.9.0Windows 11

Hello, I was being refer here from the support to report two bugs. Firstly, the type tool is glitching and is not working properly in version of 23.x.x on Photoshop. When I'm trying to change the tool with the shortcuts from the type tool to a different tool (e.g. move tool) it just glitch and doesn't change and I have to repeat the shortcut a few times to a lot of times until it swap. Have in mind that when I click the type tool it change without any problem; it's specificly for the shortcuts.Secondly, when I'm trying to use a specific font on PS it gives me an error that says "Could not complete your request because of a program error".I tried to reslove this with downgrade to an oldest version of 23.x.x but nothing happen. In short all the agents tried to reset my preferences on Photoshop and run the program as admin. Also, they reinstalled my drivers.But nothing changed it either fixed one of the problems or non. My specs for me desktop are:CPU: AMD 7xxxxGPU: Nvidia

Hi,I just want to give feedback that Photoshop 2025 is slow and bloated. To be honest, its now an application I dread having to open! I am actively looking for alternatives because it has become so unusable. I am running a top-of-the-line SLS2, and it's still painfully slow. With respect, you've always been such a top-notch company and I fear, if you continue down this trajectory, you'll lose relevance - and soon! Regards, Christian

I'm having a persistent issue with Photoshop 2025 leading. I read about this issue from earlier versions. I've reset my Photoshop preferences and done some of the minor fixes, it gets fixed but then a few days or weeks later it happens again. Anyone else having this issue with 2025 version? When trying to enter a leading other than 0 through 13.36 pt an error message occurs telling me that it has to be within that range no matter the point size of type. The one thing I haven't done is uninstalled and reinstalled Photoshop, which I guess would be the next step.

I could have sworn that until one of the most recent updates, when you would right click any kind of layer in the layer panel, "Blending Options" would always be at the top. But now it seems that for many/most of them, it's all been switched around, such as for raster and text layers. For shape layers, it's like it was before. I assume it has to do with this change. It mentions "customizable flyout menu and right-click options", but I can't figure out how to customize it. The problem is that this has severely screwed up my muscle memory. The blending options menu is one I use very often, and now it's stuck in the middle of a huge menu and I have to search for it visually instead of just going to the top. Is there a way to re-arrange the menu?   

Hi, I'm unable to use the brushes in mask mode. It is grayed out at the top & and I cant figure it out. I'm attaching a screen shot. Does anyone know what the issue is?

Cuando intento hacer un trbajo en Photosop, me sale una caja con un aviso que dice:Su licencia no ha sido registrada: (seguuida de números y letras)Porqué me sale esto si cuando entro en Adobe estoy registrado?He cerrado sesión, pero me da el error de nuevo

Hi all Does anyone know why this (see attachment) happen in sky replecement function?The sky file is in .tif and in the preview the sky image looks complete. The issue came when the sky is selected to be associated with the foreground Thank you

Hi all, Macbook Pro, Sequoia 15.6, Adobe Photoshop 2025 user here.Recently I've been experiencing some issues regarding the save feature for files. The issue is that photoshop sometimes makes a duplicate or copy of the psd file I'm currently working on when I use the "save" command, with the cmd+s keyboard shortcut. When I "save", it should save my progress to the current file, but it occasionally saves as a new file without me prompting the "save as" command, which results in me having one or more copies of the same file, at different stages of progress of my work and it has been bothersome. No dialogue box is prompted when the duplicate happens, and I just find a copy of my file appear on my desktop after I use the cmd+s command when attempting to save progress. There should be no hardware issues because I got my new laptop just a week ago. I have tried to observe this issue and there seems to be no pattern regarding what triggers a duplicate happening. It doesn't happen every time I

Sono un pensionato nuovo del Forum, esperto della materia, ma purtroppo sono afflitto da seri problemi di memoria.Ho bisogno di aiuto per un centinaio di riproduzioni di disegni colorati (Raw+jpg) tutti molto simili al JPG ALLEGATO:0) Non posso rifare gli scatti, devo necessariamente correggere e postprodurre (automatizzando al massimo) i file che ho a disposizione.Mi serve uno SCRIPT (o una AZIONE) da applicare all'intera cartella,1) per errore tutti gli scatti sono sovraesposti di 1 stop.2) gli originali erano su carta Fabriano, la cui rugosità è molto visibile sul fondo: devo eliminare la trama della carta BIANCA. La bacchetta magica col valore di tolleranza 32 risolve il problema. Ma ho bisogno di automatizzare al massimo la procedura: se possibile evitando nello script di cliccare sulla zona bianca per 100 volte. Mi spiego meglio: se fosse possibile memorizzare nello script la posizione del clic, potendo utilizzare un punto vicino ad un ANGOLO (che è bianco per tutti e 100 i diseg

Hello,  Since the updates 26.8.1 and 26.8 the legacy parameters in the Brightness/Contrast menu give non consistent results compared to 26.7 and previous versionsHere is the script i use : -grey level on the texture-Edit the Brightness/Contrast parameters, legacy activated :-- +40 for contrast-- +15 for brighness The original texture is attached as well as the psd containing the comparison between the 2 versions King regards

Currently remote working via Cloud PC (Windows App version 2.0.559.0) - what version of Photoshop is GPU compatible with Cloud PC? Downgraded to 25.12.4 long-term supported version and I am still getting the GPU error

Photoshop has always been appreciated for its intuitive features, and one such example is the ability to adjust brush size quickly by right-clicking when using tools like the Brush Tool, Clone Stamp, etc. This small feature makes a big difference in workflow efficiency. However, I’ve noticed that this convenient right-click brush size adjustment is not available in the Remove Tool. Currently, we need to go to the top toolbar or use shortcuts to change the brush size, which is slightly less intuitive compared to other tools. My suggestion: Please add the right-click brush size adjustment option in the Remove Tool as well, just like other brush-based tools. This will not only improve consistency across tools but also enhance the ease of use, especially for users who prefer visual, on-the-spot control.

Hi all, I shoot in RAW and edit using HDR but when I save the photo as JPEG it looks dull and not like HDR? I tick the HDR Output box in settings when exporting. Any idea what I am doing wrong? Two examples below. Thanks!

Hi. I am facing this annoying problem since a few days. I'm working on Windows 11 with Photoshop 26.9.0 but I also tried to install Photoshop 22.2 and the result is the same. The problem started when I placed an embedded image and I applied a rotation. I placed the embedded and by using free transformation I flipped it by 180°. I received the error: "Invalid numeric entry. A number between -180,00 and 180,00 is required. Previous value inserted.". The same error appears if I try to transform or move any other element. For example, if I insert a frame and I select the Move Tool, when i confirm the transformation (even if I do nothing but click the move tool and then press enter to confirm), the error pops-up again.Obviously I can press OK but the error pops-up again in a never ending loop. I managed to press DEL to cancel the angle value before the error pops-up again: I wrote 0 and pressed ENTER but the error appeared  again and again and again making Photoshop unus

Currently remote working via Cloud PC (Windows App version 2.0.559.0) - what version of Photoshop is GPU compatible? Downgraded to 25.12.4 "long-term supported" version and I am still getting the GPU error

Hi all. As i am working on the bunch of images which where originally scanned and cropped into individual images using Script.(Thanks for the script from Jazz), i was struck with the next step where i tried using an action which is as follows.1. Select all in the image(Landscape image)2. Transform select. Shrink the selection by 5% ,that is 95 % of the image selected.3. Activate crop tool. Enter it to execute the crop command.4. The action did well with the same dimensions of the image .As soon as i apllied the action to a portrait image the dimension didn't change to  landscape format hence cropping the second half of the image.Could there be a fix for this?    Looking for an action or script that would activate the crop command with the selection of 95% of the image from centre , pfa and with the transform selection window showing off so that we can modify the selection and once click ok the crop applies and saves the image.Thanks.

I am having a nightmare with the recent Adobe upgrade - AI fails about 1 in 5 times and the screen gives a white out image and the error message "could not complete .." - the computer is jammed and has to be unplugged. I have tried to reach Adobe - no way of speaking to them - nightmare company. I changed the various settings suggested by this expert community which reduce the "crash rate" but it is still really really poor and a dreadfgul upgrade - I am thinking of moving to another photo editing programme because the latest upgrade has snookered me! A second issue is that the upgrade has caused my regular screen to lose all the toolbars and having spent 2 hours trying to find them I give up - please sack these pregrammers!

Hallo, ich habe mir vor Jahren Photoshop Elements gekauft, bin aber vor 3 Jahren auf das professionellere Photoshop, jetzt 2025, umgestiegen. Mit Elements konnte ich eine schöne Diashow mit einigen Effekten aus einigen Photos erstellen, aber ich finde keine Funktion wie "Erstellen Diashow" in PS.Ich hätte auch Premiere Pro, um etwas zu erstellen, aber das ist ziemlich aufwendig, daher meine Frage an Euch: Gibt es ein Äquivalent zu Photoshop Elements auch in PS 2025?

Beim Öffnen von Photoshop kommt der Lade-Cursor, ich sehe ein kurzes Bild von Photoshop und dann schließt es.Mir wird folgende Fehlermeldung angezeigt: "Ein nicht behebbares Problem ist aufgetreten. Photoshop wird nun beendet."