Photoshop

Event: while working on photoshop the laptop screen goes black, but the system itself does not turn off. I turn off the laptop by holding the button for 10 seconds. Then, after the system starts, the file that was open at the time of the crash becomes inoperative.I have been facing this situation for this year (2024). The situation is reproduced for some unknown reason to me, the photoshop file can be of completely different sizes. The situation is reproduced every 1-3 months. In total, it was 8 times. I could not find a solution. Now in the 2025 version there is no such difficulty yet. I suspect that the situation may be related to my RAM, since after installing it I began to observe such problems, but this is not at all certain, since such a situation has never happened with other programs and games. The situation repeats only when Photoshop is running and other programs may not be running at all. Couple of times I trird to open a broken file in After Effects and my file somehow

My photoshop shuts down when I use the magic wand tool / select and mask then I get the note: error occurred. 

Using latest version of Bridge 13.0.9.785 and PS 26 and Windows 11-64bit. Whenever I select 2 or more Bridge thumbnails (RAW) and select "Load into photoshop layers", I get a response to use the latest version of PS which I am and already have it open.  Tried resetting preferences in both PS and Bridge, no luck.  Also tried converting the RAW thumbnails to TIFFS with no change in the response I get.

Since the latest rounds of updates to Photoshop I have noticed the only way I can get Pen Pressure to work is with 'Windows Ink' turned on.The PSUserConfig workaround no longe works and when Windows Ink is on, it is accompanied by the 'Alt' and 'Ctrl' modifier key tooltip bubbles.   Adobe also did this to Substance Painter as well.Surely these pop ups come under Accessibility, because with Windows Ink turned on, I am no longer able to use the software as intended due to the issues caused by the modifer key tooltip pop ups.Surely there must be a way for Adobe to disable these when their software is running if we MUST use Windows Ink?   I dont understand the logic behind this - it's been a bug for YEARS. Hopefully we can get an answer to this - and with all due respect, I don't really accept the 'It's designed to work with Windows Ink' response because the software doesn't function as it should.

I've had it crash at least 5 times now. It happens randomly but I noticed often when trying to use the Remove Tool.    

Problem, the selected tools adjustment panel disappears under the working document. (PS 25.12.0). This requires moving the document to be able to change the tools. 

Hi friends, does anyone have the problem with the latest version of Photoshop that when importing a RAW file, whether CR" or DNG, an error appears saying that there was a problem with the program? This does not happen with normal photos, only with RAW files. I installed a previous version, 25.1, and it works correctly.

tengo problema siempre con el programa con los graficosmi pc un gamerTarjeta Grafica 12gb Radeon TX6700Windows 1132 gb de ramnecesito solucion al problema que puede estar pasando

I made a ton of layers with Generative fill and long scripts (maxed out the characters in the script box in some cases). These layers then get labeled with the script I put in.  I went to export all 50 layers through the "Export As" option. When it got to the layers with the super long name, the system simply stopped. No warning, no indicator.  I finally figured out it was the layer name that was the problem. When I renamed the layer to something simple, the export worked.  Now, we're talking 40-50 layers I'm trying to export. There is no "Bulk Rename Layer" option, and like I said, I was not given any warning or indication the process stopped.  I would figure the Export option was renaming, because I had a few layers with the same names, and it just put a number after it.  1. Need a way to bulk rename layers2. Need an option in Export to rename or truncate the long descriptive layers Photoshop 26.0.0Windows 11 (latest updates

Recently my Healing Brush Tool has starting lagging to the point where I simply cant use it. Spot Heal and Cloning work fine.  I use the Alt key to sample an area and then paint an area but it only samples here and there as if its trying to compute what I am tryin to do. I have purged my Cache. Any other suggestions? Thanks Mac Studio - Apple M2 Max - 32GB - Sonoma 14.5

My filters have suddenly stopped working in the latest version of Photoshop.  I have attached screenshots. Does anyone know why this is happening? I have a Mac 15.0.1 Sequoia with an M1 Chip, and I use Photoshop 26.0.0

arched text not working - this menu is not appearing!! not even on previously arched text although it is still arched from an old save. desperate help pleaseAdobe Photoshop Version: 25.12.0 20240903.r.806 055f5e9 x64

Hello ! Just like the title say, i have been experiencing on the recent versions, i tried to delete and re-import less brushes. it does happen on any kind of brushes. a simple round or a custom one with many textures and parameter activated.  

I have an issue when opening Illustrator and Photoshop. When opening, the apps seemingly disable my mouse and keyboard form working, this is across all apps. The only solution is to unplug and replug them. This works intermitently however after 30 seconds or so they freeze again and need to be replugged. I have uninstalled any addition software such as tablet drivers etc. Updated all my mouse/keyboard drivers and reinstalled PS & IL and reset the preferences and updated all PC drivers etc.  This is running on windows. Has anyone experienced a similar issue and can lend a hand? From looking around I'm struggling to find a solution.  Thanks

Hello everyone, Today, I ran into an issue with Photoshop's "Blend If" function that I haven't encountered before. I searched online but couldn’t find any clear explanation, so I’m hoping someone here might know what's happening. System  I am using the latest version of Photoshop on Windows 10 Pro, version 22H2. The Issue When I apply the "Blend If" (underlying layer) option to a layer within a group, it works fine—until I clip any layer to that group. As soon as there's a clipped layer attached, "Blend If" stops working on that layer, regardless of whether the clipped layer is visible or hidden. Example Setup Imagine two groups: Group 1 and Group 2. There's one layer in each group. I use the "Blend If" setting on the layer in Group 1, and it works perfectly. However, as soon as I clip a layer to Group 1, the "Blend If" effect is disabled. I've attached a video below that demonstrates the issue for more clarity. Any insights or solutions would be greatly appreciated! Thank you!

I installed the 25.12 update and immediately encountered two, for me significant, problems.  My Logitech MX Master 3S customizations for Photoshop no longer work and when running my custom scripts that invoke a crop, the crop frame is not visible.   I reverted to 25.11 and everything is OK again.     (subject edited for clarity)    

After updating to the latest version of Photoshop (26.0.0), use of the remove tool only works for very small selected objects.  Anything of any size causes the program to crash.  For example, if I have a power line running all the way across an image, if I select it in pieces, remove works.  If I click, then shift click to select the entire line, it crashes the program.  I've sent numerous crash reports.  In desperation, I have uninstalled Photoshop, restarted the machine, and am reinstalling as I write this.  We'll see if this helps. I'm running on Windows 10 Pro 64 bit machine different from the one I'm using to post this message

Create a new canvas. New layer. Draw a rectange with the selection tool and have the sides of the rectangle extend off the canvas at the left and right side. Fill the selection with black.  Select and delete the left half of the rectange. De-select. Now try and resize the remainder.  It's transform box is extended way off the canvas, as if photoshop doesn't recognise that half of the rectangle was deleted.

MOV files do not appear in photoshop, there is a checked box once imported? This feature used to work but not sure if it is a MAC or adobe update.when using the 'save for web legacy' feature, photoshop will crash or when this does load, it shows a red/pink square. I cannot use this feature to create animated GIFs. Can anyone reccomend an alternative or ways to fix this?    

Since the update to version 25.9, my File Info screen (CMD+OPTION+SHIFT+I) has changed from Dutch to English. How do I get this back in Dutch? The rest is still working in Dutch, so something went wrong with the update?

I'm going slightly mad right now. I can't get to use Radial Blur at all. Not even on a plain image, not ona rasterized layer, smart object, absolutely no way on Earth. Using a MacBook Pro 16" with M3 Max 128GB, on Sonoma. Please help, I'm really hating this so much. Just updated Photoshop to 25.12.0 and it still doesn't work. Jeeeezzzzzzzzzz.... and it didn't work on 25.9.0 neither."The operation could not be completed."I tried absolutely everything. Even a 720p image...Radial Blur is completely broken, AND I NEED IT....omg.

Adobe just did an update for Photoshop. I downloaded and installed. And all of a sudden my Logitech MX Master 3 mouse lost its thumbwheel functionality to change brush size. That is a function that MANY creatives use on their mice. I don't understand how they could get rid of that. I have now reverted back to 2024 and it works again. Please fix. And I will start using PS 2025. Thanks.

Po zadnji posodobitvi se pojavi napaka: 

Hi there, I'm experiencing a bug on one of my machines with Photoshop. Option to select a cloud documents when trying to open through File -> Open, doesn't exist (Neither for Open As or Open as smart document). I can see my cloud documents on the home page and open my previously opened cloud documents, so I'm just lacking the button in the Open window.  The bug is on Photoshop 2024 and 2025. I'm running on Windows 11, Threadripper 2950x, RTX2080.Any thoughts or ideas?   Cheers