Photoshop Elements

I just upgraded from Photoshop Elements 10 to Photoshop Elements 2025 with the purchase of a new laptop.  The 2025 version does not have the "Color Variations" option under the Adjust Color functions under the Enhance tab.  I used the feature to color correct for lighting etc.  Is this no longer an option and what can I do to add/reduce reds, greens, blues etc. using the 2025 version?

I use Photoshop Elements 2024 on my PC and occasionally on my notebook. Now the hard drive of the PC is defective. How can I deactivate the license now, please? The correct license is stored in my account under my products. However, I can't find anything with activated devices. Where and how can I deactivate the license now, please? Am I alone in thinking that this is stupidly solved?

Is it possible to create a decorative watermark in Elements 2024?

Nell'anno 2015 ho acquistato on line il programma PHOTOSHOP ELEMENTS 13 che è stato installato 2 computer entrambi nel tempo eliminati per guasti irreparabili all'hard disk e quindi senza poter disinstallare il programma da alcuno di essi . Adesso ne ho bisogno sul nuovo PC e non viene attivato. In un hard disk esterno ho il backup di tutta l'organizzazione delle mie numerose foto, fatto con il programma in questione, che dovrei rifare completamente.Si può fare qualcosa? Si può avere una nuova chiave d'accesso visto che il programma è stato a suo tempo pagato?

I downloaded and installed Photoshop Elements 2024 on a new computer.  I opened Elements 2024 and selected Organizer.  As expected, there was no data so I selected the Import option in the program and then selected the path to the backup file located on my portable hard drive.  According to a document  “Move Elements Organizer Catalog” which  I saw online (either found by browsing or recommended by someone in the community – I don’t recall), I expected to be asked if I wanted to restore the catalog to the Original location or to a New location.  I understood that if I chose New Location the folder structure would be flattened.  Since my user name on the new computer is different, I would have to provide the New Location path.  However, when I selected Import to load the backup files, there were no prompts, the data immediately loaded – I could see the photos flash across the screen as a grid view was created.  The total number of photos at t

Folks, I've installed Photoshop Elements 15 on my Mint 20 Linux system using PlayOnLinux and version 5.19 (Staging) of WINE. Both the Editor and Organizer seem to run very well (and fast) in this environment. The Organizer starts and runs flawlessly and I can launch the Editor from there. However, when I start the Editor by itself (via a shortcut to its EXE file) a totally white window appears, which I assume is the Welcome Screen trying to come up. At that point the Editor has crashed! As mentioned above, I can start and use the Editor via the Organizer, but that is a pain. Since I can't bring up the Welcome Screen I can't get to the option located there to turn it OFF and go directly to the Editor! Can anyone suggest some other way to turn OFF the Welcome Screen via, perhaps, a configuration file or a Registry entry? Many thanks, Wayne

Enhance>Colorization isn't working on my b/w photos.

Windows 10 - 2024 version Photoshop ElementsAfter opening Photoshop 2024 and Organizer finishes scanning for new files, I get the following when trying to import new .MOV files  I've clicked "here", paid for and downloaded the extention.Both HEIF and HEVC extentions are installed.  It's then suggested to close PS2024 Elements.Delete all files in the Media Cache - Adobe "Common" folderThen relaunch the application.  No change. I cannot get Elements to import any new .MOV filesI've tried opening Video Editor then opening a new .MOV file, same error.I've tried right clicking on the new .MOV file in Explorer and chossing Open with - "Adobe  Premiere Elements 2024 Editor"No  luck. I mention that I can't open or edit new .MOV files because .MOV file that were importeda couple months ago or before upgrading to PS2024 open and play just fine.  Anyone that can help, I would very much appreciate it. It's very frustrating.

Hi 🙂Impossible to use "filters" 😞  When the new window is opening :- before, it was showing my full pic- but now, it shows many frames (here attached)Thank u so much for any help ! 🙂

Hi, A few weeks ago I was happily printing both A4 & A3 prints on my Epson R1900. Yesterday, I was able to print A4 successfully, but all I get for the A3 is a 155x105mm section of the print appearing in the centre of the sheet. The Print Monitor shows the progress bar jumping to nearly 50%, progressing to ~60% then jumping to the end, consistent with the small fraction of the print output. I have installed the latest printer driver from Epson, to no avail. I have rebooted my PC several times, with the same result. My OS is Win10. Can anyone suggest where I should go from here? Thanks in advance,Paul.

After my wife passed away in January, I had to wipe her hard drive and re-install all her applications, one of which was Photoshop Elements Version 7.0. I found my serial number on my account at Adobe.com, and downloaded a new copy of the program. After a few tries, it finally installed, but would not accept the Serial Number. Since Adobe has hidden all their phone numbers very well, I tried Live Chat. After quite a wait, I was told that the Version 7.0 was no longer being supported on live chat and that I should check the Forums. So I did, and found my problem was most likely that I failed to deactivate the program before I wiped her hard drive, and I most likely exceeded the number of activations. Now's a great time to find this out. The suggestion was to contact Adobe at 800-642-3623 and get the activations reset. It was a 2014 answer, that phone line has been disconnected. So, I'm back on the Live Chat to see if they can reset my activations. After being the queue for 3 1/2 hours (

I am trying to resize multiple files, but I get an error asking me to enter an integer (see screenshot). Any ideas? Photoshop Elements 2020 with  Mac OS Ventura 13.7.1

J'ai une version d'ADOBE PHOTOSHOP ELEMENTS 2018 achetée sur DVD a prix d'or. Impossible de l'installer sur mon iMAC en OS Ventura 13,6,4 alors qu'on m'avait dit que cette licence serait valable a vie.Qui a la solution pour ne pas devoir tout payer a nouveau ?

Mon iMac sous OS Ventura est un 64 bits et j'ai une licence de 2018 de Photoshop réputée "à vie". Comment obtenir gratuitement une version compatible 64 bits ?

Looking for step-by-step instructions to download, install, and activate, full (not trial) version of elements 2025.

Hi,I am unable to close the 'What's new in Photoshop Elements 2025' popup in Elements. So I am unable to use Elements.All the options behind the popup are greyed out so I am unable to use them. There are no close or size buttons on the popup - I cannot get rid of the stupid thing. If I click onto the 'Learn More' or 'Save Now' button it just takes me to my browser and popup remains. Any ideas? screenshot attached.

I have Elements 2023 and bought Topaz Photo AI this week to use as a plug-in, having been assured by Topaz it would work. However when I click on the Topaz PhotoAI option on the edit page under Automation tools I get an instant error PSE message see attached image which says Could not complete the Topaz Photo AI command because of a program error.I did contact Topaz support who said that my graphics card only has 4gb VRAM and 6GB is needed to run it as a plug-in.However I am able to run both editing software asstand aliens simultaneously without any problems, crashes or slow speeds, which makes me wonder why I cannot use it as a plug-in.Anyone else had this and is there a solution?Thanks 

The curent version released will only play a single audio file in a slide show even when multiple files are selected to play in the slideshow audio setting.

Hi all - my old PSE 15 software was working fine on my brand new Mac with Sonoma OS installed. However now that I've updated from Sonoma to the new Sequoia 15.1.1 OS Photoshop Elements 15 won't open at all.Any work around or solution to this, please? Is anyone experiencing similar? Thanks in advance - Stuart

I use the Topaz DeNoise Ai and Sharpen Ai plug-ins with PE 2022.  They both worked fine until PE crashed yesterday while I was processing an image with the Topaz DeNoise Ai plug-in.  When I restarted PE 2022 only the Sharpen Ai was visible. The standalone Topaz DeNoise Ai continues to run without a problem, suggesting either a corrupted plug-in or a problem with PE 2022. I have done the following in an attempt to resolve the problem: Downloaded and reinstalled the plug-in.Done a thorough clean of my system to remove junk files and other temporary files, followed by a reboot and rerun PE;Uninstalled Topaz DeNoise Ai, again done a thorough clean of my system to remove junk files and and temporary files, reinstalled Topaz DeNoise Ai, including the plug-in; None of the above resolved the problem and the only plug-in listed under Topaz on the Filter menu is Sharpen Ai. I still have a copy of PE 2019 on my system.  When I ran this, both the Topaz DeNoise Ai and

I have just downloaded annd installed PSE 2024 as an upgrade from PSE 2020. I would now like to purchase a codeword for PSE 2024. However, I am only offered the PSE 2025 purchase option. I do not wish to upgrade to PSE 2025 at this time.  Please could you direct me to the PSE 2024 codeword purchase web page.  Thanks, John S 

I use Elements 2022 on an M4 iMac.  How can i make tool cursors easuer (brighter) to see?

Is there a way to change the screen font size on Elements Organizer for Mac? Working on a MacBook Air 15" the font is very difficult to see from about 16" away.

I am using elements 2025. For some reason I am having problems putting myTopaz programs into Elements. I got Topaz Photo AI to install with no problem. Nut Topaz DeNoise and others wont work. I put them in the Elementd Plug-in  folder but an error message comes up and says the is a problem. I am s tumped as what tro do.

I´m running Elements 2024 on Windows11. When I try to Open in Camera RAW, the computer freezes. I have to go to Task Manager. I still have Elements9 on the pc and can use "Open as Camera RAW" with no problem. I have checked that Elements and Camera RAW are up to date. It is a new pc with 32gb of RAM and a graphics card. Everything else on this pc works ok including demanding apps like Topaz Photo AI. I did not have this problem before updating to Windows11.