『アドビコミュニティフォーラム』に質問/トピックを投稿する方法
Questions
新着順
Estoy intentandor probar aumento de escala generativa con Topaz en el nuevo Photoshop y me sale un mensaje de que dice "En este momento, el administrador del sistema no permite acceso a esta función. Póngase en contacto con él para obtener más información"Alguien sabe por qué me pasa?
Been using Photoshop since 7.0, before it was CS or years... never had an issue except this whole month, Photoshop just doesn't open. I end task on all photoshop processes, try again, nothing. I get it working by fluke sometimes after a reboot. Tried opening from Cloud app, run as admin, no luck SPECSIntel Core i9-14900HXNVIDIA GeForce RTX 406064GB DDR5 RAM1TB SSDAll latest Adobe/Win11Pro/and video driversDELL SE2419HR 24"
Hi there, I am desperately trying to resize my Canon r5 images to "even" or "clean" numbers (pixels). The original format of the r5 is: 8192 x 5464 px (2x3 format). When I am in the "Image Size" Window typing for example 300 pixel (width), I will get 200 pixel (height), which makes absolutely sense because of the original sensor aspect ratio. BUT: When I type 3000 pixel for the long side (width), I suprisingly get 2001 pixel for the short side. WHY? I asume there is some hidden decimal place going on in the background?!? I remember there was no issue with my old Canon 5D Mark IV (6720 x 4480 px). Is there any workaround? Any help would be greatly appreciated.Thanks and best regards!
I tripped over this now-closed thread:https://community.adobe.com/t5/photoshop-ecosystem-discussions/why-was-sync-settings-removed-in-cc-2015-1/td-p/7876491 I am curious... does anyone still feel there's a requirement for this? A potentially unofficial/official response in the original thread stated that its removal was partly due to Libraries being introduced at the time. However, I don't see how Libraries caters for app Sync Settings, 10 years following that post.
Seems like in the past there was a forum in the Adobe corral where general infor was discussed -- I am looking to configure a new custom pc to replace my old custom pc (my builder died) and am looking for advice --- does this general info forum still exist? Thanks to those who know more than me,Joe
Photoshop bug.Anyone else have this issue?The grid is turned on. Snapping is on. I'm pulling guides to snap to the grid. I pull the vertical guides, starting from the left and moving right. They all snap to the grid.Then I begin pulling the horizontal guides down. I begin from the top. The guides all snap to the grid until!!! I pass the half way point on the document. After that the guides don't snap to the grid. It's annoying and inexplicable. But, since its easy enough to zoom in on the document and pull the guides into place I've never bought it up before. But its been happening for years. I suppose I always thought it was a graphic card/photoshop mismatch thing or some other minor thing that would be fixed along the way. But it never has been fixed. And its driving me nuts. Anyone know why this happens?Please don't suggest that I check whether snap is turned on, or suggest that I refresh my Pref's because I have done all of that and I've updated photoshop a gazilli
hi ! I was looking to remove a background using the remove background feature (usually found in the properties tab if I recall?) but the tab is empty, i can still find the feature in the contextual bar tho. I was wondering if it was a bug of if the feature was moved to another place. thank you in advance
Bonjour, J'ai mis à jour hier soir Photoshop 27.0.0, mais Nano Banana ne fonctionne toujours pas 😞 j'ai toujours ce message d'erreur y compris sur Beta. Quelqu'un aurait une explication, voir mieux … la solution SVP, merci
Hey everyone,I’m using Photoshop (latest version) and I’ve noticed that the font size looks way too small, even when I set it to a large value. The text appears tiny on my canvas compared to what it should be.Has anyone else faced this issue? Could it be related to resolution, DPI, or display scaling settings? Any fix would be appreciated!
Till yesterday everithing were working fine. Yesterday I try to update all the Adobe product but all of them require Win11 so I update only CR. However after that both PS2025 and PSBeta2025 crash everytime I try to open a Photo (in every way - from LR, using the button "OPEN", dragging and dropping, ...).Envidia driver has just been updated.Please do not suggest to upgrade the PC to win11. I just want it to work like yesterday !-----------------------------Winver: Version 22h2 (Build SO 19045.6456) Adobe Photoshop Version: 27.0.0 20250928.m.3240 8248fae x64 (beta, PublicBeta)Number of Launches: 116Operating System: Windows 10 64-bitVersion: 10 10.0.19045.6456System architecture: Intel CPU Family:6, Model:14, Stepping:9, AVX2, HyperThreadingPhysical processor count: 4Logical processor count: 8Processor speed: 2808 MHzBuilt-in memory: 32634 MBFree memory: 20919 MBMemory available to Photoshop: 25083 MBMemory used by Photoshop: 70 %Crash Handler: AdobeDCX Version: 9.11.1SAM SDK
I recently updated to Photoshop 2026. I have been having this issue where jpgs downloaded from social media don't open and give this error. A similar issue used to happen in Adobe Indesign where photos downloaded from whatsapp gave an error when imported in Indesign. Opening them in MS Paint and saving them again removed the error.In photoshop, I get this error. After clicking on "learn how to fix", I am taken to this page.https://helpx.adobe.com/photoshop/desktop/troubleshoot/file-format-issues/resolve-program-error-while-saving-files.html?trackingid=C12Y2WS7&mv=in-product&mv2=psI have taken all the steps given on the above page. The images open fine in MS Paint. And if I save them in MS paint and open them in photoshop, they open fine.But is there a better way that the jpgs open fine directly in photoshop? Someone reported a similar issue here also in 2020.https://community.adobe.com/t5/photoshop-ecosystem-discussions/my-whatsapp-images-is-not
During busy photography season this filter has gotten some bug. It will not work at all to move eyes simply. I have cleared the cache, I'm done the backend file delete that was posted online, restarted, updated. What gives?? How can I fix this feature? Here's a sample pushing eyes all the way otherside - it displays error (but doesn't specify and doesn't work)
I'm using the Rotate View tool at a specific rotation value to facilitate painting horizontal strokes.Although I can preview what's happening in normal orientation by tearing off the Navigator panel and enlarging it (thanks for that flexibility!), I also need to switch back and forth between orientations frequently, as some areas need to be worked differently.There has long been an easy reset (double-click the tool), and there is also a "Reset View" Button (thanks for that too!).But I am disappointed that I cannot make an action for Rotate View to my chosen angle.And per Jazz-y's answer to this post (reset view via scripting ), I understand that even scripting won't work, without conforming all documents.So I'd really appreciate it if Adobe would consider adding Action support, including the rotation value, to this tool.If not, I could live with Jazz-y's solution, moving all my reference docs to another app so they stay upright--but that script is for resetting to rotation 0. If a
Many tools give predetermine end result. For example when use clipping mask you know what should be the end result. There are many type of Blending Mode but those seem do not give a predetermine end result, it seems only a trial & error can decide which is most appropriate one. Is this way Blending Mode works?
I have a problem, I have a picture of a landscape and there is a figure on it. After generative, I wanted her to copy hundreds next to her from one character. He just can't!!!
I updated to photoshop 26 now evoto and topaz do not work hep
I work on a Mac and Eizo monitor. I have photoshop open on the Eizo and everytime I open a sub-window (i.e Curves) within the program the pop up goes back to my mac screen even if I drag it to the Eizo and close it on there. This is a new issue and has happened since I updated to Photoshop 2026. Wondering if anyone is encountering the same issue and has a workaround or fix? Thanks
Bonjour, comment copier les mêmes réglages sur toutes les photos, cadrage, netteté, couleur, etc.
I’m currently working on e-commerce photography for a new product release that features a lot of neon colours. As many of you will know, neon pigments don’t photograph the way they appear in real life — the camera tends to flatten or dull the vibrancy, and the colours lose the “neon pop” that customers see in person. I’m retouching in Photoshop and working in RGB, but I’m struggling to get flat neon areas (like paper and plastics) to look as bright and accurate as possible on screen.I’d love any advice, workflows, or adjustment techniques you’ve found effective for making neon colours appear closer to reality in an RGB environment, while still keeping the images natural and suitable for e-commerce (not over-edited or gimmicky). Are there preferred adjustment layers, blend modes, or colour management practices you’d recommend? Any insight would be hugely appreciated!
Dear Adobe Photoshop Community,I’m a WordPress theme developer. I plan to release a theme on WordPress.org, where all bundled images must be GPL-compatible.I would like to clarify how your terms apply in this situation:If I take a CC0/public-domain image, edit it in Photoshop with standard tools (crop, color, retouching, etc.), then export it, does Adobe add any restrictions on the resulting image? Can I still redistribute that edited image under the GPL inside my theme?If I use Photoshop’s AI features (e.g. generative fill, style changes) on a CC0 image that I provide, are there any additional rights or license terms on the output that would prevent me from redistributing that image under the GPL (allowing users to copy, modify, and redistribute it)?My goal is simply to confirm whether using Photoshop (including AI tools) on CC0 images keeps the result free to distribute under GPL with my WordPress theme.Thank you in advance for your help.
HelloI would like to make my SketchUp project look photorealistic. I asked Photoshop to do it for me. It tried, I see the progression bar going to, maybe, 20 or 30%, then it closes and say : "Votre administrateur systeme n'autorise pas l'accès à cette fonction pour le moment. Contactez-le pour plus d'informations / Your system administrator does not currently allow access to this function. Contact them for more information".I tried then with various and easy prompts, but I always get the same answer.The computer is my own, I am the administrator. However, I am actually a student, my Creative licence is not mine and therefore, I only have 250 IA credits (247 left). What could explain this comportement ? I never encountered this kind of message previously and I don't know what I could do to prevent that.Thank you for your help 🙂
Unk here. Mac user... upgrading from 2024 to 2026... With regards to the image... what is this gd stupid "frame" called and how to I banish it to the deepest darkest pits of hell?I'm an OG Photoshop user and this sort of nonsense drives me crazy. I feel I should even have to ask this question... but... here we are... Second question, why won't Photoshop automatically import my previous settings when I install the latest version?
Hi.I/m using Sequoia 15.3.1 (24D70) system and Adobe Psd 2026 (but issues I had also in the previous version) on Apple M4 with 16GB memory.For some time I'm experiencing an issue with Vector Smart Objects. When I edit the graphics in the Illustrator VSO suddenly misplace randomly the elements of the graphics – they move slightly (or jump to a different position or dissapear) even though the artwork and artboard size haven’t changed. Even having the artboard size exactly the same as VSO in the Psd.After closing the file in Illustrator and reopening it, making some minor change, and saving – proper display comes back. So – VSO doesn't affect the real position of the elements, only displays them inappropriately. This behavior didn’t occur in previous versions. Has anyone else experienced this? Any known workaround or official fix from Adobe?
Had this issue at least twice. Photoshop does not open the dialog, but just sits in the background. In fact if you look at task manager [PC] you can see it running with 0% resources, and if you try it again, a second or more instance will be running, but nothing on screen. It appears as though the issue is the graphics process, but you cannot get to the preferances panel to change it GPU settings, memory use, etc. The fix for me was this:1. Uninstall Photoshop - you probably need to restart computer to do this2. Restart computer3. Install Photoshop4. Start photoshop and go to edit preferance set GPU off5. If you exit photoshop before setting these preferances, you will not be able to restart it6. exit PS restart computer
When in drawing using the brush tool with any colour, if I stop drawing and start again and then go over the lines again the colour will be black but only if it is over the same colour.
すでにアカウントをお持ちですか?ログイン
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
申し訳ございません。このファイルは、ダウンロードしても安全かどうか、内容を確認中です。数分後にもう一度お試しください。
申し訳ございませんが、当社のウイルススキャナは、このファイルをダウンロードすることは安全ではないと検出しました。