Questions
Recently active
Hi there, I udated recently my mac to Tahoe 26.5, and had issues with premier. I had to delete all the apps and instal them again. Still, when I opened one of my projects, one of the images ‘ image strip with extension tiff’, does not show on the timeline, instead I have a red bar. I already rendered in and out and deleted the files, but it did not solve the issue. Any tip? Many thanks
How is clearing the cache related to cursor operation?
Setup: M4 Pro (24 GB) | macOS Tahoe 26.6.2 | Lightroom Classic & Premiere Pro | High Power ModeThe Issue Tasks like AEB HDR merges, timelapse exports, and Premiere renders are running extremely slow. Under heavy workloads, the system never ramps up—fans stay completely silent.Live Diagnostic (powermetrics during timelapse export) CPU: 100% load across 14 cores (~29–35W) GPU: Effectively idle at ~50 mW (0.05W) Thermals: Fans at 0 RPM because overall system package draw never trips thermal limits. Lightroom/Premiere are failing to offload rendering to the GPU, leaving the CPU to bottleneck the entire export.Troubleshooting Already Done Settings: Toggled GPU acceleration (Auto / Custom / Off) in LrC; set macOS to High Power Mode. Caches & Storage: Purged all preview, scratch, and media caches. Operating 100% on internal SSD (Disk Utility clean). Installs: Clean reinstalled Adobe CC and performed a clean macOS reinstall; tested in Safe Mode. Hardware: Apple Diagnostics pa
Please help!! I've tried all of these settings and none of them have helped me solve this problem. I'm editing on a Mac and I downloaded VLC as my main Video Player. My project color settings are set to 2.2 Web. The export preview in Premiere is correct and the color when I view in VLC is correct, but when I go to post on Youtube/Socials my colors revert to being washed out and the shadows brightened basically only showing in that 1.96 color profile when I upload. Someone please help!!
When I set my in and out point in a zoomed out timeline with clips on only one track, the out point consistently gets set 1 frame in to the next clip, so I get 1 frame from the next clip in the end of the exported video.
So, my previous, very old system unit was an Intel Core i7-4790, 16GB DDR3 RAM, 1TB Samsung 870 SSD, and GTX 1060 6GB. The usual exporting time for a 6–7 minute video was around 7 minutes.Recently, I upgraded to a new system. My current PC specs are Ryzen 7 5700X, 32GB DDR4 RAM, GTX 1060 6GB, and a 1TB Samsung 870 SSD.However, when editing the same type of 6–7 minute videos, the exporting is much slower. On my new system, the export takes around 15–17 minutes, compared to only around 7 minutes on my old i7-4790 system. I don't know what's causing this or what I should do.The videos I'm editing don't have any heavy effects, and my GPU drivers are also up to date.The CUDA settings i believe is enabled and hardware encoding as well.What should I do? Is there a setting I might be missing? Or what hardware should i upgrade?Thank you!
Hi, does anyone know of a secure way to convert an SRT file to VTT for captions? I am working with proprietary information on a video and I don't see a way to export a VTT file in premier. Using a VTT file is required on the sharing platform, an SRT will not work. Thanks!
Help. I need to export some promos for broadcast and they require stereo audio on tracks 1&2 and mono audio on tracks 3&4. My timeline consists of two stereo tracks, voices on 1 and music & sfx on 2.This seems like it should be easier then it is. What am I missing? Thanks!
In Premiere Pro, I used Wave Warp on a still image of a face to animate it, so it looks like it’s nodding. I was working in ½ playback resolution. When I export the video, the Wave Warp does not look the way it does when I am editing. Wave Warp makes the face looks like it’s twitching, and it blurs the movement of the face. I also tried nesting the clip but that didn’t work. Is there any way I can get the Wave Warp effect to export like the way it looks when I use ½ playback resolution?
현재 윈도우 11 사용 중인데도 최신 버전 프리미어 실행 시 자꾸 위와 같은 안내창이 뜹니다보고서 내보내기 후 확인하니 운영 체제가 윈도우 버전 10.0.22631.1이라고 뜬다는데 설정 들어가서 윈도우 사양 확인해 보면 분명 11Pro 버전이거든요… 해결 방법이 있을까요?알려진 문제가 있는 상태로 진행을 누르면 일단 문제 없이 실행이 되긴 하지만 불편합니다 ㅜㅜ 아래는 보고서 내보내기 로그의 일부입니다. 시스템 구성 요소:[운영 체제] Windows - version : 10.0.22631.1문제:1. 이 버전의 Windows는 더 이상 지원되지 않습니다. 이 앱의 향후 버전은 이 OS에 설치할 수 없습니다. 자세한 내용을 보려면 [정보]를 클릭하십시오. URL: https://helpx.adobe.com/kr/premiere/desktop/get-started/technical-requirements/adobe-premiere-pro-technical-requirements.html ID: jira:DVAAP-3358
The software suddently unable to export mp4 file properly today. I tried 4 times and every mp4 exported became unreadable with file size of 0 byte.
Issue: When making a custom effects preset which includes multiple effects and their settings, the effects are applied but their settings are not. Steps to Reproduce: In my case, I’m working with an audio only file/ track. I’m trying to put a dynamics effect and a parametric equalizer effect with custom settings for each into one effects preset. so I’ll apply both effects to an audio track and adjust their settings to my needs. I’ll then ctrl click the root level of each effect in the effect controls panel and follow that with a right click and save preset. I’ll leave at default type of ‘scale’ and click ok. When dragging the effect preset onto another audio only track, the effects apply but their settings don’t. they are just default and empty. Expected Result: The effects should apply AND retain their custom settings. Actual Result: effects apply with default/ empty settings Premiere Version: premiere pro 26.3.2 build 2 Operating System: win 11 pro, 10.026200 build 26200 GPU Driver (
I've already updated Premiere four times, and it's still version 26.3.2. Why are they updating the same version four times? At least change the build number. Or do 26.3.3. What's the difference between the four updates? What bugs were fixed?
When clicking to open a sequence, Premiere hangs and it won’t show up in the timeline panel. Even if you click a second sequence, it won’t show up, until you click a sequence in the Project panel that is already open in the timeline. Also, when they do finally show up, it will often not give me the hamburger menu or the “X” option to close the sequence on sequences I’ve opened. Premiere Pro 26.3.2 Build 2 (was also happening in 26.2.2PC - HP z8 Fury G5NVIDIA RTX 5000 Ada gen.Intel(R) Xeon(R) w7-3565X (2.50 GHz)Windows 11 Enterprise 2SH2 - Windows Feature Experience Pack 1000.26100.344.0
I'm wondering if there's a way to correctly replace seceral clips of footage in the timeline using the same timecodes in the replacement media as the current media in the timeline. Here's my scenario: I have an intro animation. I have chopped little sections of this animation up and sped those sections up so that that key points in the animation hit the beat of the music correctly. Probably 20 little sections total between normally timed, and sped up sections, and now the animation lines up with the music. Great! I have the exact same animation file, except it's in Spanish and I need to replace all the English animation clips with the Spanish ones, but keep all the timing adjustments. Right clicking the animation and selecting "Replace with" bin or source clip doesn't work as it just replaces each section with the clip starting over at the beginning and "match frame" would be what I expect to work, but it usually gives me an error about not enough medi
I'm looking for more functionality from the Behringer X-Touch control surface and hope it is possible to bind inputs from the control surface encoder knobs at the top of the fader bank to x, y, and z values for a selected property in the effects control panel. It is easy enough to map a single encoder to change a selected value, but I'd like to, for example, press the EQ button under Encoder Assign (red box, upper right), which will pre-select the first property in the Premiere Pro Effects Panel, unless a property is already selected; also, set the first three encoders on the X-Touch (8 encoders, yellow box) are bound to the x, (y, and z if there) values, and the fourth encoder is set up to navigate up and down the effects panel, choosing properties with x,y,z numeric values or a selection list. For fields with a selection list, if the x value encoder doesn't work, then the fifth encoder could be employed, leaving 6, 7 and 8 for future use. If other Encoder A
I produce podcasts and have multiple speakers with separate audio tracks. I want to use the Transcript panel especially now with the additional capabilities with the text based editor but I’m still having an issue where I can only see the transcript for one track at a time. Basically the top unmuted track. I know this has been an issue for a while and there have been workarounds and threads that are similar but I still haven’t seen a solution to this. I feel like there must be a checkbox or something that I’m missing.I do know that if I generate a static transcription I can see multiple tracks transcribed but then I won’t get the features that come with a dynamic transcript panel
MEU MEU PROGRAMA LIGHTROOM FECHA SOZINHO, NÃO CONSIGO EDITAR
I am using Premiere Pro 22.6.2 (Build 2). I have Premiere transcribe a sequence and check the box for it to recognize different speakers. All good. But when I click on the speaker in the transcription window, it does not allow me to change to another speaker. And when I choose to edit the speaker name, the same does not save. I used to be able to do this and it's a great feature. Has anyone else had this problem? Is there a fix?
Genuinely, I am baffled.How Adobe can charge over $100 per month for software like Premiere Pro; that can’t handle simple things like title generations or MOGRT properties - yet Da Vinci Resolve is FREE and handles animation beautifully. I want to stay loyal as an Adobe user of over 15 years, but at this point we’re all being screwed over. I can’t pretend it’s alright anymore. I’ve stopped recommending Adobe, and as of next month we will be removing all Adobe subscriptions from our offices and moving onto better options. We are expecting to double our speed of workflow, purely by abandoning Adobe products. We’re paying premium prices for half-par software, that is WORSE than FREE amateur created softwares.It’s time everybody woke up to this blatant rip-off called Adobe.
Quando eu vou entrar na aba de exportação do Premiere tanto o 25 quanto o 25.1, a tela de exportação fica preta aparecendo apenas o preview do vídeo.1- Abrir algum projeto:2- Abrir aba de Edição;Não consigo exportar os vídeos que editei.
Hello! So, there have been a couple posts on how Lumetri color effects are not exporting out of Premiere Pro correctly, but none of the answers given have corrected my export quality yet so I'm hoping I can get some new answers now especially with CC 2019. Anyways, my footage is color corrected/graded very simply. I have each clip color graded with the Lumetri effect individually and I also have an adjustment layer with the Lumetri effect on a specific sequence of the footage. It seems as though none of my Lumetri effects are being exported as much footage is dull and looks similar to the raw footage. I was orginally exporting H.264 with Match Source for bit rate but now I've tried a very of settings (I've tried MPEG, etc). My max bit rate is on in sequence settings. I've also copied and pasted my Lumetri folders into Adobe Media Encoder folder but still nothing. First image is what I have in Premiere after color grading and the second photo is what shows up on Quicktime. Please help!!
I'm having an issue with workspaces after updating to CC2019. First, I noticed that all of my custom workspaces from Premiere Pro 2018 were missing (and I foolishly hadn't synced them to the cloud in many months). Problem solved by copying them from documents>adobe>premiere pro>12.0>profile>layouts to the same folder for 13.0.However, when I start a new project and select my custom editing workspace, there's one window that won't start up in the right location. I have to manually drag the project window to my preferred location at the start of every project. I've tried saving the custom workspace many times (save changes to this workspace, and save as new workspace), synced with my cloud account, but I can't get a project to start up with an accurate positioning of my custom workspace. After I manually move the project window, save workspace and close project, it will then open again with the correct configuration; however, when I then creat
HELP!!!In Premiere, the Dynamic Link option appears grayed out—both when I right-click a clip and in the top "File" menu. I can't even click on it. The programs are the same version.How I can fix it?
Hi everyone,I'm experiencing playback lag in Adobe Premiere Pro 2026 (v26.2.0.65), even with a very short video and relatively simple edits.At the beginning, playback was smooth. However, after making a few cuts and basic edits, playback started lagging significantly. The timeline becomes choppy, even when I lower the playback resolution (1/2, 1/4).Important details:The UI remains responsive (I can click tools, move around, etc.) The issue is specifically with video playback in the timeline The video is short and not heavily edited (just cuts so far)Here is my current setup:CPU: AMD Ryzen 5 5500 Motherboard: Gigabyte A520M DS3H RAM: 16GB (2x8GB) DDR4 2400MHz GPU: AMD Radeon RX 6600 (8GB VRAM) Storage: Kingston NV3 1TB NVMe (PCIe 4.0)My goal is to understand which component is likely the bottleneck for Premiere Pro in this scenario, since I’m planning a hardware upgrade.From your experience:Would this kind of lag be more related to CPU, RAM speed/capacity, or GPU? Is 16GB RAM at 2400MHz
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.