Questions

Had a problem with graphics in the timeline yesterday: Was having two different rectangles move - spin and move from one place to another, and needed to create a bit more space for one version to fit a bigger sub-head title. Copied the perfectly good set of five elements (background color, logo, text and two rectangles) one from one sequence to another, went to the endpoint and subtracted 200 pixels from the vertical on those two rectangles. Should be easy peasy, right? Not so much. In between the starting position and the end position, with no visible keyframes, the rectangles moved in ways not desired nor shown in the timeline. clicked and dragged both start and end point keyframes and deleted. Added fresh and got same problem. Chatted Adobe and was told to delete the whole thing and start over, which is easy enough in this case, but jeez, isn't that what we're not supposed to have to do? There have been other issues, too, like just rendering out four videos and being told two of the

I tried to "Remove Attributes" by unchecking them all, but when I open the option again they are all checked. Is that a bug or am I doing something wrong?

I placed 2 keyframe on the opacity "rubber band" at 0.0 and at 0.06.If I pull the "Rubberbacd" down the image on the monitor fades, as expected, but...the entire clip runs at 100%, even though Opacity is 0% at 0.0 and 100% at 0.06, and the rubber band, and effects panel, reflects those keyframe settings.I don't understand why it's no behaving as expected.

When I press the spacebar on the timeline, nothing happens for some time. The video starts playing back after 5-6 seconds with a delay. This problem occurs every minute. Premiere updated and cleared the cache. The problem is at the software level, because the computer is very powerful

I'm having an issue where the audio in my timeline is not playing, but when I click it to view in the source monitor, it plays just fine.As the video plays through the timeline, my levels do not jump at all.Does anyone know how to fix this? I already cleared my cache, which did not fix the issue and can't seem to find a solution. Would love help.Information:Software: Adobe Premiere Pro CC 2018OS: Windows 10Hardware:Windows machine32 gb RamRyzen 7 2700x 8 core 3.7ghz cpuGeforce GTX 1060 gpu

I see that when using the Proxy workflow, it still uses the full-resolution media on exports. That's great for the final cut, but when exporting rough cuts it really makes the exports take a whole lot longer - 3x longer on my tests. Would be great if that was an option left up to the user whether to export using proxies of full res media - instead of doing some workaround where I change the location of the original media to force it to export with proxies.Test export - 3 minute 4k sequence with scaled 5k R3Ds (proxies are 1080p ProRes Proxy)Proxy export (1080p mp4) - 5:55Original media export (1080p mp4) - 15:05

Bonjour, J'aimerais ajouter un flou gaussien aux parties les plus lumineuses de mon image. Exactement comme montré dans ce court tutoriel :https://www.youtube.com/watch?v=EMljjxrPFNw&list=PL_SuRWa8BsdQHPS0JVYjzdH6TUMVlX0k1&index=1 Seulement le preset Luma Key n'existe plus depuis la version 2025 apparement. J'ai bien télécherger les presets proposer par ce youtubeur, mais impossible de trouver Luma Key dedans. Tous les tutos montrent la même technique, qui a l'air tellement simple et efficace... Comment faire avec la version 2025 de Premiere ? Ma version : 25.1.0 (Build 73)Utilisé sur Mac Mini 2023, puce Apple M2 Pro. Un grand merci par avance !

Hola, tengo el problema hace unos días que el premiere no previsualiza, la línea del tiempo va muy cortada, todos los espacios de trabajo van lentos. ¿alguien sabe qué puedo hacer?

Después de estar trabajando una hora aprox. la interfaz de adobe simplemente no trabaja, quiero modificar algún aspecto de lumetri y no muestra los controles o tengo que minimizar y maximizar y se vuelve algo horrible , el proceso se vuelve lento, mi flujo de trabajo se vuelve frustrante con adobe premiere, ya he publicado de esto antes pero nadie me da una solución. Simplemente no se puede trabajar con Adobe premiere, tengo un intel i10850 k, nvidia RTX 2070 super, 64 GB Ram 3600MHz, y discos NVMe .2 para edición. Por fa vor que alguien me diga qué pasa

Comienzo a editar y luego de un rato se empieza a trabar o a funcionar lento. Me pasa hace unos dias !!Si alguno me ayuda con eso  gracias!

recuerdo que en alguna version se podiaahora no me deja seleccionar varias imagenes en el monitor de video y alinearlas con click derechoayuda porfa

I want to move the track to the left, but I can only be 5 seconds. This is stupid, why do this?

Hi,I use a Wacom Intuos Pro and Premiere v13.1 on a Mac and I have the following problem since about a year (so with all the previous Premiere versions as well).When I navigate with my pen the cursor very often "gets stuck" - when I click on something and move away it keeps thinking that I am pressing down. It happens during anything - navigating between different timelines, doing colour correction etc. It is really annoying so sometimes I have to switch to the mouse which does not have this problem. I have this tablet for two years and the clicking works perfectly fine with all the other software including other Adobe Products like Lightroom and Photoshop, but Premiere is almost impossible to use.How can I fix it?Thank you!

I have Premiere Pro's newest version 23.2.0 and iMac with 16 GB memory on Monterey 12.3.1.I have 995GB of storage in total, out of which I still have 190GB available.Up until two weeks ago the 4k footage from my DJI Mavic 2 Pro played back smoothly, even without the proxies.Then suddenly one day around 2 weeks ago, Premiere Pro lost all ability to play back the same 4k drone footage whatsoever. Even when I  used proxies or tried to use 1/8 playback resolution. It just will not play, it gets stuck when I try to even touch it in Premiere Pro. My set-up or the way I'm doing things has not changed so I'm very frustrated and clueless because I literally cannot preview/edit the drone footage.I've noticed that the playback of 4k footage from a Sony has also worsened, however I'm still able to preview/edit it when I create proxies. Any ideas about what may have happened?

Bonjour, Une question me vient en tête quand je vois l'enchaînement des mises à jours...POURQUOI VOUS RETIREZ LES EFFETS QUE LES GENS UTILISENT ?? Je viens de passer à la version 25.4.1 et un des effets que j'utilise très règulièrement a disparu  ! Il s'agit de "masquage par couleur". Pourquoi supprimez-vous des effets ? Quel intérêt pour vous ?  Vous ne faites que gêner vos utilisateurs. C'est pas le premier qui disparait. Mais là c'est vraiment de trop. Du coup je vais être bloqué à la version 25.3 et ne pourrait plus faire les mises à jours car vous avez estimé que l'un des effets que j'utilise régulièrement ne vaut plus le coup... Merci de le réintégrer rapidement.Je me demande pourquoi je paie ... Occupez vous plutôt de réparer les nombreux bugs qui sont présents plutôt que d'enlever des outils qu'utilisent vos utilisateurs ! Merci d'avance ! 

At the total end of my video project, I used to be able to drag the Dip To Black to the very end of my video but now when I drag it over to the end of the video clip, it shows a red box and it won't add to the video clip. Am I doing something wrong? Is there an easier way to add a fade to a black screen to end the video?

I double-clicked on the footage in the Program Monitor while the Selection Tool was active to see my motion path and anchor point, but they're not showing up.  Why?  I want to zoom out slightly while centered - and in my 2d screenshot have reset Scale from 50% to 40% - but how do I recalculate my anchor point so that it's at the center of the previous keyframe?  In other words, between the last 2 sets of keyframes, I only want to scale - not pan L to R or up and down.  In the 2d screenshot, the image has drifted up towards the left top of frame.  I don't want that.  Thanks for your help!   

since I updated to 25.5 the application won't even launch. I am working on a MacBook Pro 16", Nov 2024, Sequoia 15.6.1

Hello, I’m using the latest version of Adobe Premiere pro on a MacBook M3 Pro. After the recent update to macOS 26, Spotlight stops indexing files or finding any files as long as Premiere Pro is open. Once I close Premiere, Spotlight starts working again, and I can find the files. I’ve checked the settings and contacted Apple, and they said this is an issue related to third-party applications. What’s the solution so I can use Adobe Premiere normally and still access my files quickly via Spotlight? Only files, images, and videos don’t appear — other things like apps and settings still show up in search. As soon as I close Premiere, the files appear again in Spotlight 

I've looked all over and can't find a solution, I'm hoping that someone here might have a solution. This consistenly happens across different projects I'm working on, the audio or dialogue track fades in when the sound starts in the clip.  The length of silence at the beginning of the clip/segment/track doesn't change anything.  I'm am using .WAV files.  The result is that if the text/words start with "As", the entire word is dropped from the .mp4 export.  Or the word "Therefore" sounds like "erefore". There isn't a transition or fade in that I can see, DeNoise isn't being used, in the Sound Elements tab nothing is selected (meaning it isn't trying to clean up dialogue).  I'm not using noise cancelling headphones, but am wired directly to external speakers. If I replay the clip several times in a row, or rather only let the first few seconds play, and then replay that segment again and again, by the 4th time Premiere Pro will stop fading in the t

Hi,  i would like to know if it is possible to change audiotracks from mono to seperates ones in someone else his edit or i quess project. so i would have a track for quotes , another track for  general noise and another track fot voice over?. And how do i do that? and is it possible in premiere pro or do i need after effects? thanks in advancekind regards boudine 

Hi,I made captions in 608 in Premiere. Export in QuickTime Apple Pro Res 422 HQ in "Embed in Output File". When I check the file in QuickTime, the caption are different. Position and Type are change,

1. Version 24.0.0 Build 582. Windows 10 Pro 64bit3. Steps to reproduce: Apply warp stabilizer effect, when done processing, choose "stabilize only."  Use motion to move the clip around to see more clearly that footage is cropped to the bounds of the original fotoage.4.  It used to be that you could choose the option to "Stabilize Only" and it would not crop your video. You could then manually zoom and transform the footage to keep it in the frame as you wished and the whole original footage was shown uncropped. HOWEVER, some time in a recent update this option was broken. You can see the video that I made that shows the issue of the stabilized footage being cropped to the frame, even when "stabilized only" option is selected. 

我是台灣人，請問premiere pro 2020 有繁體中文版嗎？在Creative Cloud設定下載語言為繁體中文，可是載下來還是英文..，如果沒有繁體中文的話，設定簡體中文，載下來會有簡體中文版嗎?

What I'm looking for is the text appearing letter by letter, not a wipe or a mask or something. I've searched tutorials but all I found was wipe effects dragged onto the text. I'm new to Premier but good at after effects, where there are text animation resets. Does premier have something like this aswell? I found graphic templates but not text animators specifically.