Questions

Please see attached video clip.  Shows my code and behavior in Premiere Pro. Note how the code just modifies the value of the Opacity property?  It isn't adding a keyframe as I intend. Is here someone that can review/advise?

Hey! I hope someone can help me as I am having issue with exporting.  Iv spent all week working on a big video, its an hour and 15 mins long with a lot of editing work in it, its part of a series on youtube.  This level of work isn't new to me or my pc but for some reason iv faced the following issues with exporting this video.1.  The 1st attempt to export was taking 4 times longer than the video duration and then eventually just stopped, didn't crash or hang, just stopped.After this issue I restarted my pc and rolled my Nvidia drivers to the Studio version, as a sense of false hope I guess.2. The 2nd attempt went through just fine and when I went to watch the video and test the quality before uploading I noticed the visuals stopped at a certain point.  The audio kept going just fine but the the visuals stopped.  It would show the last frame that worked.  I tried on VLC and on the Windows Media player. 3.  I decided to clear out the temp files et

it is difficult to sync 2&3 camera footages selecting single files, please provide any update that sync batch files from 3 cameras 

Hey guys just wanted to post to help anyone who is having mouse lag + playhead timeline lag/freezing + just lag in general with the new update to Premiere/windows 11 update.  My mouse was super laggy when not even in a project and just in the preference settings and bad lag when playing in the timeline and the playhead just stopping but the video playing normal.Things I tried:Set Audio Hardware input to: no inputDisabled mouse acceleration (Enhance pointer precision)Clear Media CacheResetting workspace layoutUpdate Nvidea Drivers/reinstallunistall and reinstall Premiere Proand finally what did it for me was checking enable Gsync for full screen mode only and not for windowed mode and fullscreen in the nvidea control panel.Should look like this photo belowHope this helps     

When I sync a shot using the Auto sync feature, either the A1 audio (which is embedded with the video in v1) shifts to a different position or in some cases, the A2 adjusts itself, but I do not know the cases. How does Premier Pro decide which will go where/when, or is there a way to choose which audio (either a1 or a2) should move?

Jeez Premiere Pro playback is like a snail v the race horse that is Davinci resolve. Recent upgrades seemed to have made it even slower. It's painful to use after Davince Resolve tbh I'm using the same P Pro files as a few months ago and the playback is impossible most of the time, hanging for ages on a frame - dire

It has happened to me more than once that the timeline started fast-forwarding without my intervention. Why does it happen, and how can I slow the pace back to normal?

Sony AVCHD .MTS AC-3 audio doesn't work on Premiere Pro?I needed to use it as .mp4 was going to be too big for the 64GB I have on it.VLC player works perfectly, but Windows Media Player doesn't. Adobe Premiere doesn't see the Audio. Even converting to Adobe ProRes 422 doesn't work the audio either and neither does .mp4 with AAC Audio Format Export. 😔

how come you cant use "hold" as a type of keyframe when you draw a mask path? its all grayed out. but you can use that type of keyframe on crop. Can this be fixed?

Hi,I have NewBlue FX Titler Pro 6 on my system, and it is integrated with Avid MC.  How to integrate with PP? Asking the Help service at New Blue they said that if it's on my system then PP should know, but if you look at the two attached screengrabs you can see that it doesn't.Please advise,DC

      I am experiencing a critical issue where the LottieFiles plugin panel displays a persistent black screen in Adobe Premiere Pro 2025 on Windows. Nothing loads on the panel interface. Symptoms: Initially, the panel flickered between navy and black screens. Currently, it stays as a static black screen (Blank). Other Adobe extensions and plugins work perfectly fine. I have already tried the following troubleshooting steps, but none of them worked: Reinstallation: Uninstalled and reinstalled the LottieFiles plugin multiple times. Reinstalled Premiere Pro (Tested on both v2025 and downgraded to v24.6.8). Rendering Settings: Changed Project Settings > General > Renderer to "Mercury Playback Engine Software Only". Cache & Credentials: Cleared C:\\Users\\[User]\\AppData\\Local\\Temp (Deleted all Adobe/CEP related files). Cleared cep_cache folder. Removed Adobe-related credentials from Windows Credential Manager. Registry Settings (Important): Verified that PlayerDebugMode is s

Close Gap would work for me in a test environment, as usual with Premiere tools. But when you really need the tools to work, in a real life situation, they often don't work.I tried to remove the gaps on audio 2.I understand how other gapless tracks might block this tool.But it's crazy that you can't tell the sequence not to look at all these other tracks.As you can see, I tried locking, unsyncing, etcetera in almost every conceivable combination.Is this tool just obsolete crap or what is going on? It work fine one single tracks edits. But why can't it handle isolated material?  

Just recently upgraded edit machine from 2017 Imac Intel to Apple Stufio ULtra 3. I have a massive Premiere Pro project that will not open and work. Tried dumping prefs, cache, plugins in addition to doing complete clean re-install of Creative Suite. I am devasted right now. I've tried creating a new project and importing individual sequences, import as project shortcut , I am at my wit's end as this a a project that I've been working on for over 2 years . I absolutely hate Adobe now and do plan on migrating to Resolve eventually but I have to get this project open . I have been using premier since the beginning and with each update the software get's worse.  If there is anyone from Adobe that can figure this out I would relaly appreciate it.

I hate premiere pro so much, it is absolutely dog water in stability, I had to re export the video 10+ times today for it to FAIL each time, wanna know why?? Because of one effect, I had to cut it out in 10 places because it decided to be dumb and not render :). It reneldered just fine in other parts and thanks to this HORRIBLE program, I had to sacrifice my precious effect!  [Edited by moderator] [Subject edited for clarity by moderator]

What used to take 30 minutes now takes hours. And the time keeps rising. 4 hours 5 hours 12 hours. It's so frustrating isn't it now. 

Buenas, premiere pro, de pronto, no reproduce los videos dentro del programa, ya lo desinstalé, lo instalé de nuevo y nada, no se que pueda pasar, iba de maravilla, y desde hace unos días no reproduce, si alguien me puede ayudar, lo agraqdezco.

Does anyone know how to do this? My graphics card is busy rendering, but I want to keep working without loading the GPU. I disabled Mercury Transmit in the pref., but it didn't help. 

peed ramping has become a fundamental technique in modern video editing. Whether it’s real estate walkthroughs, drone shots, social media content, or cinematic transitions, smooth speed ramps are no longer a “creative extra” — they are part of everyday professional workflows. When comparing Final Cut Pro and DaVinci Resolve to Adobe Premiere Pro, the difference in how easily and intuitively speed ramping can be achieved is striking. In Final Cut Pro, speed ramping is simple, visual, and fast. The editor can enable speed changes directly on the clip, drag points on the timeline, and instantly see smooth transitions without digging through menus. Final Cut automatically applies natural easing to speed changes, which helps prevent abrupt or mechanical motion. This design allows editors to focus on storytelling and pacing rather than fighting the software. For many users, speed ramps in Final Cut can be created in seconds with predictable, repeatable results. DaVinci Resolve offers a simil

I've been editing a project ( a multicam wedding) that was started weeks ago.Btw I have 25 years NLE experience - 14 years on Premiere. Im on a Mac Studio near maxed out with dozens of gigs available on my boot drive, and lots of HDD and SSD drives attached with about 2Tb of storage.As I often do when I start a new edition of an existing project, I renamed the project file and saved it. That was yesterday morning.Today after about 10-14 hours of editing and being about 92% finished, I decided to connect some other drives. I (believe) I saved my project, but its possible I didnt. I didnt think much of it as I was tired and my auto-save is set to make saves every 15 minutes.After quitting Premiere I ejected my drives and connected a new one. Then I finding what I was looking for, I reconnected the drives and booted up Premiere.It didnt show me any previous versions of the edit except for the one initial made weeks ago. When I searched through all the usual places for the auto saves I fou

I know that this problem was discussed in another thread already but I post it here anyway. I am currently on PP 25.6.3 on a Windows 11 PCWhen I am importing a .m2ts file with Dolby Digital audio there is no sound in PP. When I double click on the .m2ts file OUTSIDE PP the video plays back perfectly with picture and sound in Windows Mediaplayer. Any solution?

Hi.. I have a series of keyframes I'd like to add... about 40.. I've computed in a spreadsheet the frame numbers where I want each of them created.In this case, I'd like to add them all to Opacity... but may want to add to others as well.Is there a way to read a .csv or other import file, and do this in some automated way.

Hi... sometimes when being away from my computer, and returning, Premiere has this weird graphical anomaly... closing/reopening doesn't seem to resolve... only restarting my Mac seems to get rid of it. This seems a rather new occurrence... I don't recall updating anything.. but prehaps a recent update of premiere itself (currenly on 25.6.3 (Build 2) is the issue? Any ideas of what is causing this, and how to avoid restarting? See the image below.. note the white bars/noise... that should be 'clean' camera footage... restarting the computer resovles as state.

When installing Premiere Pro 2025 on Windows 11, it creates folders in the Documents Folder inside OneDrive. I reinstalled both Premiere and OneDrive, but the issue persists. I later reinstalled OneDrive at a different location and then reinstalled Premiere, but it still created three folders inside the Documents folder of OneDrive (please see the attachment). How to stop Premiere from creating those folders in OneDrive?

Dear all,I am an absolute beginner to Premiere Pro v25.  I have setup a folder structure on my harddisk that contains one project:Tutorial 1--Export--Media----Images----Video ----AudioProject (this contains the .prporj file) In Premier Pro, I have a Bin structure that has the same organization. Now, I want to copy the harddisk folders to Tutorial 2 but use a different video (which I would then place in 'Video' and add to the corresponding Bin in Premier Pro.However, the media (video, logos, etc) still point the the files in Tutorial 1 on my harddisk. -I tried Project Manager --> Consolidate.  This does not copy my folder structure-I have see that I can (temporarily) change the name of Tutorial 1, such that Premier does not find the files and I can manually relink all media. Does not seem to be a good approach? My question is: what is the correct workflow for handling a situation like this where I want to make a series of tutorials and just wan

Hi, Premiere has been updated to version 25.6.1, but I still cannot import N-raw files. What could be causing this?Thank you.