Questions

Suddenly, when I'm adding fade transition to one audio track, Premiere adds transitions to all audio tracks, like they were linked but they're not. To make one transition I must click on the right track- I didn't needet to do that before. What happened? Linked Selection is off. I tried to rset Premiere but it didn't help.

Hello, i juste update PP to the v25.4 and i had a big video to edit,Usually, the transcription panel helps me a lot to cut all the pauses in my audio with dialogues only.But this time, there are less options and i cant even delete all the pauses that are detected. Im on a macbook 3pro 14"with macos 15.6 on it.Thanks a lot !! It helps a lot so i really need this for my upcoming projects

My Adobe premiere pro was working till last night. I installed camera drivers and it stopped working. It just opens and only black screen is visible. I have urgent project to complete. Contacted customer support and even they couldn't resolve I am told to use the old version. Please help.

I'm working in a fairly large and complex project (15 minute episode of a lifestyle webseries). When I press the spacebar/play button to resume playback, there's a ~5 second pause before it plays, and it's starting to drive me nuts. Here's a video of the issue: Once playback gets going, there's no lag at all - I can play at full resolution without any dropped frames. And if I pause it for a just a second or two and then resume, it'll pick right back up. But if I go idle for more than ~30 seconds, there's always that hangtime when I press play. Doesn't matter if I'm in my massive main sequence or a 10 second nest, there's always that pause. The same thing happens when I try to select a clip in the timeline. I click, nothing happens for 5s, and then the clip gets selected. If I then immediately click on other clips, they select instantly, but if I wait 30 seconds and try again, the 5s lag is back. It almost feels like my processor goes into an idle state after a bit,

Asus VivoBook Pro 15 N580VD-E4392T256GB SSD+1TB HDDIntel Core i7-7700HQGeForce GTX 105016 GB RAMMy hardware shouldn't be a problem, but when I open Premiere pro (or Illustrator) my cursor just keeps on loading(the round icon that appears next to the cursor) and flickering. I can't click anything. The flickering causes the "File" window to close as soon as I press it. I have used the programs before but since the 2020 version it just doesn't work. After Effects and Character Animator seem to be working just fine.  

Been working on a video for the past 3 days and accidentally pressed the read-mode only on the bottom left and lost everything. Is there anything I can do to recover it?

Hello , i've been working on this doc for a month and ofcours this happnedit happend alot to me , but each time i had autosave for this project , this time i only have one save/projecttried import/new pp version/delete cach/reset pref and the common stuffguys please if anybody have any idea please help me , can't lose a whole month of work 

Hi there.  I have completed my edit and wish to grade in DR, so need to export the timeline as individual clips. However....because this is a 'Team Project' the PROJECT MANAGER is greyed out - inactive. So is this simply not possible working within the Teams environment? I am stuck! Cheers, Marc

i am using Premiere Pro v25.3.0,  i tried to encode an project to H256 format with following code, but the return of exportAsMediaDirect always is  Error: -1  and there was not encoding happened, please help!!!! Can it be a bug from Adobe? followings are i have tried or found:  if used the Premiere pro exporter GUI (File->Export->Media...) and imported the same preset file (export_1080p_H265.epr) , encoding was successful   Tried to create and save a new H256 preset file from Premiere Pro v25.3.0, the code still not worked  the code was working for H264 preset file var out_put_path = "C:\\Temp\\adobe_premiere\\out_put.mp4"; //var preset_path = "C:\\Temp\\adobe_premiere\\export_1080p_H264.epr"; var preset_path = "C:\\Temp\\adobe_premiere\\export_1080p_H265.epr"; seq = app.project.activeSequence; if (!seq) { alert("No active sequence found. Please open a sequence in the project."); } var result = seq.exportAsMediaDirect(out_put_pat

GooddayI'm trying to change the opacity of one single color in a layer.What iI need to get at the end is:- that all that is black should be 0%- one other color abt.50/50- while all the rest to be at 100%Anyone knows easy trick to do that?Rgds!

Hello there,Hope my english will be clear to understand.I work every day with the tool "subtitle" and "automatic translation".Since today I can not use it anymore because every language aren't available to download. I see the "cloud" and the "arrow" that means "download" but nothing happend when I click on it.I used to have English and French vocabularies and I cannot download them back.I cannot work, this is my main job : doing documentary for my client... with subtitles !Please if someone can help me, I'll appreciate that.

I've seen similar posts but I'm stumped on how to resolve this one.  I created a Library of .mogrts which I share with my team.  They access the .mogrts (read only CC invitation) via the Essential Graphics Panel.  That all worked great right off the bat but I'm running into issues now when I delete and/or rename the .mogrt files.  The changes are visible in the Libraries tab in Premiere, in the Creative Cloud App (Files - Your libraries), and also in my browser (web based).  However, the changes do not ripple to the Essential Graphics window in Premiere.  This goes for both my computer and my coworkers.  I've restarted my app and computer multiple times, synced my Premiere settings but no dice.  Any thoughts on how to "force sync" the library?  Any suggestions are welcome.  Thanks in advance for your help.        Photo shows discrepancy in Essential Graphics panel vs. all other Libraries views from my computer b

I am going crazy as this issue has no solution no matter whatever I try. The export specs are above. Then I am getting the *GPU Render Error* To address the issue: - I updated the driver. - Turned off 'Opacity' layer/effect in the video timeline.- Add 'Spherize' effect. Also the premiere pro project file is in a harddrive and I am exporting the video to the PC harddrive. But nothing seems to work. How come premiere pro can't render the frame but play it. I have share the screenshot of the effects being used in error timestamp and all necessary info.  

hey, can someone help me with this, i want to make this man visible on the white shape however not on the green background, i tried matte key, it didn't work

Hey everyone,I was just working on a project in Premiere Pro 2023 (on a PC running Windows 10 64 bit), when I noticed that the Premiere Pro icon on the taskbar shows two windows stacked on top of each other. When hovering over it I see a transparent window called "DroverLord - Frame Window". Based on the minimal info there is regarding this I gather that it's related to some sort of error reporting for Premiere Pro. I haven't had any issues all night while editing so I'm wondering why I'm seeing this. Can anyone shed some light as to what this is about? Thanks! 

I have a 1 minute video project. When I go to export it, it says "Rendering Required Audio Files" at 0%. I waited about 10 minutes and it was still at 0%I have the original audio file and also an mp3 song for background music on this short and simple project. I tried converting it to a song to a WAV file but that didn't make a difference. Also my C and D drive are not close to being full, if that makes any difference.I tried exporting the project without the music audio in it and it said the same thing. I then tried to export the project with out the original audio and then another time with no audio and the "Rendering Required Audio Files" still showed up and wouldn't export.Any tips would be greatly appreciated!Ryan

Is there any way that the speed ramping or using the clip key frames when changing speed of the clip can also effect the audo of the clip as well? This is such a simple feature that EVERY other video editor has. Literally even quicktime has this feature. Why is it so hard for Premier Pro to also adjust the audio to match the video clips speed? Am i missing something? Why do i have to cut the audio after changing the video speed even though the audio and video are linked together to make the audio slpw down at the same rate of teh video. 

Reset Parameter buttons count when tabbing between attributes which adds an extra button click every time you want to jump up or down through attributes. Is there any way to ignore them when tabbing? Also as a side note when you do tab to one of them it tabs to the next attribute down's reset parameter button which is visually unintuitive because it looks like it should go to one that's in line with the attribute (left to right).Thank you for any help

Hey everybody.Just encountered a problem. When I start playing a sequence, there are some frames drop in the beginning of playback. I tried putting several files in a sequence, r3d 5k, braw 4k, h264 4k and fullhd, all of them start with chopping playback and smth like 1-3 seconds after everything plays smooth. In the end I made a sequence with only audio file, and there I had the same result - 7-15 frames dropped, started with chopping and after that played good. Tried to play the same files in DaVinci -- everything is perfect. I tried to reset the Premiere settings, reinstalled the program, set power management mode to Best performance - nothing helped. My laptop: core i5-13500H 2,6Ghz, 24GB RAM, RTX 4050 Laptop, but I'm sure it's not because of it. My desktop PC is a way worse, but I don't have such problem there. Thanks in advance for every reply!

Footage shot on an Sony a7iii. Auto-detect does not read the log footage so I am trying to apply a manual override. However there is no option for the s-log2 gamma with the s-gamut3.cine colour space. The only available options for Sony are: Sony S-Log/S-Gamut (new)Sony S-Log2/S-Gamut (new)Sony S-Log3/S-Gamut3 (new)Sony S-Log3/S-Gamut3.Cine (new) Trying to determine which option would be best to use? Or if I am better off applying a LUT instead? Additionally, is there a way to choose slog-2 as the input gamma & s-gamut3.cine as the input colour space separately? Any help is appreciated. Thanks.

Hi there, I am working in Premiere Pro 2024. I've tried many things (like changing the sequence and export settings) but I cannot get the clips on my timeline and  my exports to look like the original footage. I've attached a still from an original clip, a still from the timeline, and a still from the export. Any advice would be much appreciated, thanks! I’m working in Adobe Premiere Pro 2024, Version 24.6.1 (Build 2)And I have attached Sequence Settings in a screenshot My Computer is a Macbook Air Apple M3OS: 14.6.1 (23G93) Footage was taken with iPhone 13 ProCodec: MPEG-4 AAC, HEVCColor Profile” BT.2020 HLG (9-18-9)  

“Adobe Premiere Pro 2025” is damaged and can’t be opened. You should move it to the Trash.""This file was downlaoded on an uknown date."How do i fix this? Adobe support is usless, AI answers not getting anywhere like many support bots these days.

I have been dealing with this issue all day and have yet to find a solution.  Anytime I try to play video (either in the preview window or the timeline) it stutters no matter what file format that I'm using.  So far I've tried clearing my cache, reinstalling and updating the drivers for my GPU, deleting all my prefernces in premiere, changing the playback quality, changing the video preview codec in the sequence settings, and making sure that I had the render and playbacy set to GPU acceleration in the project settings. None of this has worked. I just updated to the latest version today (03/17/2025) and that's when the issues started. I can go back to an older version if need be but I'm hoping that someone here has been experiencing similar problems. My System SpecsWindows 11 64 BitProcessor: 13th Gen Intel(R) Core(TM) i9-13900KF 3.00 GHzRAM: 32GBGPU: NVIDIA GeForce RTX 3060 Ti (with the Game Ready Driver installed)Storage: 800GB with 130GB free Any help is app

Hey guys, how do we save text presets (styles) now in PPro 2025? I have a text layer over a video with a white background color - i attached a screenshot, i just want to be able to save this text style, but since "essential graphics" panel is gone i don't know how to!

Hello, So starting today when launcing Premiere Pro I've noticed none of my recent projects show up as suggested options on the list anymore, instead just saying to create a new project. I'm used to seeing at startup a list of multiple recent projects I've worked on, which is helpful as I have separate projects/sequences for various clients I access daily. I obviously can just open a project manually each time, but it isn't preferred of course. I know you can change the preferences At Startup to just open your recent projects all at once, but I just want the list to be present again to click on a project with ease. Definitely not a serious issue (or bug?), just a little annoying. I've already restarted my PC, cleared cache, signed out and it still isn't showing my recents list when launching Premiere.  Any suggestions or is anyone else not seeing their recent projects too? Thanks!