Adobe Collaboration Experiences

Can't pull icons från CC Library in ID, what's going on? 

Using the library is first good, but later on it changes to something that is squeezed  

Summary: Adobe Acrobat terminates without warning when opening any PDF page that requires a raster image to be rotated at draw time. A second, independent crash occurs on JPEG images encoded with 4:4:4 chroma. Both are reproducible on demand with the attached minimal test files.EnvironmentAdobe Acrobat DC, Windows 11 NVIDIA GPU; ASUS Monitor Control running Preferences → Page Display → Rendering contains no "Use 2D graphics acceleration" option, i.e. Acrobat reports no supported acceleration hardware Already attempted with no change: Help → Repair Installation; clean NVIDIA driver reinstallSymptomAcrobat closes immediately, with no error dialog, when opening scanned PDFs. Vector and text PDFs open normally. The correlation with scanned documents is incidental — see below.Root causeThe trigger is rotation of a raster image at draw time, regardless of how that rotation is expressed and regardless of the image codec.The distinguishing test is a pair of files whose image streams are byte-i

Hello, I'm experiencing an issue with intermittent white flashes that occur regularly (every 20 to 30 seconds) when I'm working on images in Photoshop. This issue only occurs in Photoshop; Lightroom Classic works perfectly without any flashes. My setup:  Windows 11 Graphics card: NVIDIA GeForce RTX 4090 (up-to-date drivers) Monitor: Eizo ColorEdge CG2700X (4K UHD, connected via an original DisplayPort cable)  Current workaround: The only way to completely stop the white flashes is to deselect  “Use GPU” option in the Performance preferences. This confirms the existence of a bug related to V-Sync or the display area refresh rate between the latest Photoshop engine and high-end NVIDIA GPUs on professional 4K monitors. I hope an update will be released soon to fix this very annoying bug. 

Windows 11Lightroom Classic 15.5.1Photoshop 27.10.0NVIDIA GeForce RTX 5070Both apps in prophoto RGBsteps:In lightroom, click ‘edit in photoshop’select image in photoshop and go to AI AssistModify the imageClick Pro Editor to send back to photoshop layersThe image is now over-saturated.If I had downloaded the image in AI assist, and added it to my photoshop layers using ‘place embedded’ the same distortion occurs.Initially the distortion also occurred in the transfer from lightroom to photoshop, until I switched off graphics processor. It solved that issue but not this one.Have tried both assign profile and convert to profile. Neither worked.Adobe support in a remote session was unable to resolve and suggested I submit a bug report. 

Nejde nainstalovat čistý Adobe Reader! Proč, nechci plnou verzi acrobatu ani jeho zkušební verzi. Chci jen READER. Zkusil jsem vše, ale vždy končím tím, že mám nainstalovanou plnou verzi 800MB!!!! a stejně nejsem schopen vyplnit obyčejný formulář. Nepotřebuji editovat PDF.  OSX Tahoe Díky Skolek

Hi ,Today there’s problem in adobe illustrator exactly in convert to vector , i don’t know if this problem happend with all of just with me   

CC Library panel is CONSTANTLY freezing up. Every single day, it never works. This has been going on for months. PLEASE fix it. Frustrating to see all these posts about this same issue and not a single one of them has been addressed. This problem has been happening for WAY too long for Adobe to continue ignoring this.

Hi everyone, I've been experiencing this problem with Creative Cloud Content Manager for a few days now. I've noticed that the process in Activity Monitor spikes to 100% and stays constant, sometimes even reaching 180-190% CPU usage, without me doing anything. It happens immediately after startup and stays that way for several minutes.My configuration is:iMac 2020, OS: 14.8.3 (23J220), 3.8 GHz Intel Core i7 8-core, 32GB RAM.Adobe Creative Cloud version 6.8.1.865.Can anyone help me with this problem? Thanks in advance!

I can’t scroll on mobile to see the rest of the image to proof.  It’s useless on mobile.  

CC Libraries keep reporting broken link, even though nothing is broken and the Libraries and all connected. This happens with my files and other clients which i have opened, this happens intermittently every 4-5 mins anyone else had any issues or is this Adobe’s end ? 

The attached PDF file has some filled+outlined text. In Acrobat Pro, select “Use print production” and then “Save as PDF/X”. Choose “Convert to PDF/X-4 (Coated FOGRA39) and press OK. The resulting PDF now has incorrectly rendered text.Expected: Filled letters are aligned with their outlines.Actual: Filled letters and their outlines are offsetted.

I would like to report a display/UI issue affecting Adobe Acrobat Reader on Android tablets.The problem started with the app version released on August 30, 2026 and is still present after the September 2, 2026 update.On Android tablets, when the device is used in landscape orientation and I highlight some text, the color palette is not displayed correctly. As a result, I am unable to select or change the highlight color.The same issue also affects other color palettes/tools: in landscape mode, the palette appears cut off, incomplete or partially outside the visible area of the screen.If I rotate the tablet to portrait orientation, the palette is displayed correctly and all colors can be selected normally.I have reproduced the issue on different Android tablets, including:Samsung tablet Lenovo tabletThe problem does not occur on Android smartphones, where the color palette works correctly in both portrait and landscape mode.Steps to reproduce:Open a PDF in Adobe Acrobat Reader on an And

I have color libraries set up specifically for different clients. Many times, the CC libraries panel “gets stuck” on the last color palette I had open and will not let me switch to a different one. In this screen shot, you can see “holocaust museum.” When I click on the arrow to the left of the Holocaust Museum label, it does nothing. Restarting does not help either. This problem comes and goes. Tomorrow it might work or three days from now it might work. Currently, it has been stuck here for a day. It is super annoying, disrupts workflow and makes this feature unusable. I’m using version 21.4.1.  

Lightroom and photoshop are not synced. I can not open photos from LR classic in PS

The past couple of weeks my team has been experiencing very buggy scrolling behavior in Share for Review. Especially in Safari. It seems like continuous scroll has been removed? On large documents, it's very difficult to view the bottom of a page. As soon as you barely reach it, Review brings up the next page and puts the top of it at the top of the screen.

não aparece a visualização, puxa de tudo na renderização para um simples ajustes de cor 

Camera: Sony A7C (ILCE-7C)Software: Adobe Camera Raw 18.5 / Lightroom ClassicFile format: Sony ARWLens: Laowa 100mm Macro, manual aperture (f/5.6)I noticed that consecutive photos taken in continuous shooting mode are sometimes rendered at dramatically different brightness levels by Adobe Camera Raw/Lightroom, even though the exposure settings are identical.Example:A7C05734.ARW — ISO 6400, 1/100 sec — rendered darkA7C05735.ARW — ISO 6400, 1/100 sec — rendered much brighterThe aperture is fully manual on this lens, so it cannot change between frames.The difference is NOT present when the same ARW files are opened in Sony Imaging Edge. The files appear essentially equally exposed there. The embedded/system previews also do not show the large exposure difference seen in Adobe.I compared the RAW data and metadata and found a reproducible difference in Sony RAW SubIFD tag 0x7316:A7C05734.ARW: 0x7316 = 128 (0x0080) → Adobe renders darkA7C05735.ARW: 0x7316 = 65535 (0xFFFF) → Adobe renders bri

I am trying to use assets, text styles, saved in my Library in InDesign and nothing is working from the Libraries panel. I opened Creative Cloud on the Web and attempted to export the Library to my InDesign folder on my hard drive and got the following error: 

Is there a career path at Adobe for experienced product power users and domain experts without a coding background? I have 10+ years of real-world experience working professionally with Adobe Photoshop, Lightroom, and photography workflows. Over the years, I have identified many real-world workflow gaps, user problems, feature opportunities, and ideas that could improve Adobe products. I am also interested in contributing through product thinking, feature concepts, workflow analysis, user feedback, testing, and PRD-style product proposals. However, I do not come from an engineering or coding background. Does Adobe hire or work with experienced industry professionals like this who can contribute to product discovery, workflow improvement, feature development, UX research, product testing, or customer insights? If yes, which Adobe roles or teams would be the best fit for someone with this type of real-world product expertise? It would also be great if Adobe had a pathway where long-time

1. Executive SummaryA reproducible regression has been identified in Adobe Photoshop affecting the Remove Tool starting from version 27.5 onward.On identical hardware and system configuration, the Remove Tool fails consistently with a generic error:“Could not complete your request because of a program error.”The issue is 100% reproducible and does not depend on image type, tool mode, or GPU acceleration settings.Rolling back to Photoshop 27.3 immediately resolves the issue, strongly indicating a software regression introduced after 27.3.2. Severity AssessmentSeverity: High Impact: Core tool failure (Remove Tool) Workaround: Version rollback to 27.3 User impact: Blocks AI-assisted object removal workflow entirely in affected versions3. EnvironmentApplicationAdobe Photoshop 27.8.0 (Release)Operating SystemWindows 11 64-bit Build: 26200.8737 (Insider build)HardwareCPU: Intel Hybrid Architecture (24 cores / 32 threads) RAM: 64 GB GPU: NVIDIA GeForce RTX 4070 VRAM: 12 GBGPU / DriversDirectX

Hi Adobe Community, I have been trying for quite some time to understand where someone with my background can fit within Adobe. I have 10+ years of hands-on professional photography and post-production experience, mainly in wedding and portrait workflows. During this time, I have: - Worked hands-on across 200+ weddings- Edited 200,000+ images- Worked closely with many professional photographers- Mentored 100+ photographers through online workshops- Used Photoshop and Lightroom extensively in real production environments- Experienced the complete workflow from image selection and culling to RAW processing, retouching, batch editing, quality control, client delivery, and archive Because I work with these tools every day, I have also identified many workflow pain points that professional photographers face. I recently developed an independent Lightroom product proposal based on one of those problems. The project currently has three progressive stages: V1 — Smart Culling: faster selection

Hello Adobe Support,I'm experiencing an issue with Photoshop that started today.Until yesterday, I was able to use Share for Review without any problems. Today, when I try to use it, I receive the following message:"Cannot use the feature because it is not available. Contact your IT administrator for more info."I'm signed in to an Adobe for Teams account provided by my organization (Youth Plus Africa Limited). Photoshop is otherwise working normally, and I still have access to my apps and Generative AI features.However, I've also noticed that Cloud Document features appear to be missing. For example, I no longer have the option to Save as Cloud Document, which was previously available.Could you please help me determine: Why these cloud collaboration features suddenly became unavailable? Whether this is an issue with my account, my license assignment, or an Adobe service issue? What steps are required to restore Share for Review and Cloud Documents? I've already signed in with the c