Audition

Currently, if I select Extract Audio from CD, ALL of the tracks are checked for extraction by default. I rarely extract more than one track from a CD, so have to uncheck up to 24 or more tracks individually. It would be helpful if there were an "Uncheck All" option, or the default were all unchecked with a "Check All" option and that seems like a relatively simple coding feature. Then again, maybe that's an option that I'm just not seeing. Thanks for any response.

My sound level only shows to -60dB. How do I get it to show down to -70?

When Spectrally deleting or even muting waveform audio in the Spectral Frequency Display window, instead of a clean removal, it will semi regularly cause a digital audio artifact/click at the very start of where the selection occurred. This is frustrating because there's no way to remove the click as trying to do so just creates more of these. I've tried changing both the Smooth delete/cut boundaries and all edit boundaries from 5ms to everything possible but that doesn't make a difference either.   I feel it's a bug because if instead of deleting or muting you Deamplify the same audio by like -99 db, it doesn't happen.   MacOS 15.7.1 (24G231) and Audition 25.6, but this issue has been present for many versions.             

Hi everyone, We're excited to announce a new Adobe Community experience is coming this January. A little bit about the update:The new experience will be simpler to navigate, make it easier to connect with other creatives and Adobe experts, and will give you clearer ways to share feature ideas, enhancement requests, and bug reports—with greater visibility into their status with our product teams. In the meantime: Adobe Community will remain active. Keep using it as usual—there will be no interruption in access. In fact, you’ll notice even more Adobe Experts on deck to provide faster responses before, during, and after the update. No existing content will be lost in the update. Every single post, reply, solution, feature request, and bug report you’ve made will be transferred to the new experience. You won't need to recreate anything. Existing content will reappear in two phases. When we launch the new community, all posts created on or before November 16 will be there from day one. Aft

Hello! Anyone Know how to fix this? I got a error for audition  telling me to save and then close audition. So i did that, but when i reopend my file the below occured, Audition clearly is showing something was recorded but the frequency view has nothing. When I play the section where there is nothing its silent until the section where the spectral view is showing. Any ideas on how i can restore?

Hi guys -  I am having trouble making an Aggregate Device (Mac Midi setup) work in audition. I can get either element work (and I'm pretty sure if I use the aggregate device I can work one of them through the system), but I have a Rockville Mixer and a Blue Yeti Mic and I can't get both of them to come through at the same time. If anyone has any input as to how to work the settings (most likely the Audio MIDI Setup) to get both of these elements to come through at the same time so I can play things from the mixer and the mic, it would be geratly appreciated. Feel free to work through anything you think may be effecting this in Audition but I am fairly certain that the problem is either in the MIDI setup or the Sound settings on Mac. Thanks,Rob

I made some edits to an interview, to try and get the background noise out of the clip. I'm making the video in Premiere Pro, and right clicked the audio -> edit clip in adobe audition. Then, in Audition, I did Effects -> Noise Reduction / Restoration -> Noise Reduction (Process). After that, I saved my work in Audition, and quit the program.  The edits I made didn't sound great, so I want to revert my audio back to it's original form, taking all of my adobe audition edits out of it. How do I do this? Essentially, I messed up and want to start from square 1.

Hi all! I have Windows 11, Audition 2025, and a Roland Rubix 24. Unfortunately, audio playback is faulty when using the ASIO drivers due to problems. It seems to be the typical issue with the sample rate.I also have an older version of Audition CS4 on the system. With the same hardware settings in both versions, the identical files play back without any problems en CS4.  Does Audition 2025 have a bug with ASIO under Windows 11? Is there anything I can do? Meanwhile I deinstalled Audition 2025 and installed it again. Now at least the MME-drivers work again and it seams without problems with the sample rate of the files. But again: How is it posible, that CS4 doesn't have this issues with Asio? Best regards!Hans   

I created a .wav file in Audition 2025, converted to AAC there (1) and also (2) in Apple Garage Band, but NOTHING permits a successful import into Apple Music. Involved Apple tech support for 2 hours, resulting in their belief that something in the original Audition file (a codec?) in Adobe is not compatible with an Apple Music import. Would value any solution or ideas towards one. Thanks. 

i have set up everyting and i still can't get audition to recongize my microphone.  Is there a trick to this?

Hi!I am using the latest version of Audition and I am trying to have it record (and playback) sound from my system and a Rockville RockMix 6FX mixer. I have downloaded Blackhole and can hear and record the audio from both, but there is a massive echo. From what I have read I am recording both the sound going out and the sound coming in. I'm hopeful that there is a way to resolve this, as I need to hear all the elements (it's for a podcast and the guest will be connected via the Mac running audition, I need the mixer for multiple elements (microphone, another computer for sound, etc.) and need to be able to hear playback of the recording through the computer so I can hear the person speaking over my computer. The reason I can't run everything from the Mac is that I am also using video and need to capture the screen to get the video of the guests. Any help would be much appreciated! Thanks. 

As the title indicates, using ctrl k cuts all the tracks in multitrack view. How can I use a shortcut to cut only one track and not all of them?

I need to use some of the favorites effects to apply to elements currently being edited together in the multitrack views. These elements are not whole tracks, but just parts of a single file split into multiple parts. I only want to apply the effect to one part, aka element.I tried pasting the element to a single track in waveform view, but that does not work either. How do I do this? 

I cannot monitor any audio during recording (whether through my bluetooth headphones or mac speakers), I would prefer to hear the audio through Audition (I know Blue Yeti has a headphone jack, but that play back is not very good) while I can hear the audio through the headphones and speakers during playback. Is there any way to hear the microphone during recording or do I have to listen to the awful Blue Yeti playback while I record? This is Mac-related, but if there is any info that could lead to the answer I would be extremely thankful. Rob  

I work with an Archive of single speaker talks. Some have recording or transfer errors where the voice slows down and/or speeds up randomly every few seconds. Anyone have experience repairing these kind of files? There is supposed to be a way to do this in Audition, but even the support people can't find it. The manual mentions the Spectral Pitch display, but the prcedure described foesn't exist in the latest version of Auduin. Any ideas?

I installed the new version of Audition today, and proceeded to rip nearly 60 tracks (some over one hour in duration) from various compact discs. Listening to one of the files just now, I heard a short (less than one second) dropout toward the end. I have since visually inspected a couple of files, but found no obvious dropouts. Has anyone else had this problem with version 25.6.0.97?

Hi!I'm having some issues when I apply "Dynamics processing" and the "sidechain" effect and links that to autoduck the music under speak.In the Multitrack view it works as supposed, but when I mixdown the multitrack to a single file, it applied the "Dynamics processing" effect on the entire track, instead of only when the ducking should be applied during speech. It used to work flawlessly, but for some reason after updating to Audition 2020, it doesn't work as it's supposed to anymore. I've tried creating a new track and using that, but the effect is the same. Thank you in advance. Best regards,Patrick

When inserting a short clip (seconds not minutes) into a new multitrack session, clip shows up at the END of a very long time line. Any ideas?

I have a recording of someone delivering a speech. There's a moment where he says something funny, but he says the wrong word in the punchline. The viewers will know what he meant, so it'll still work if we can't fix this, but I'm curious: does Adobe have a (likely AI-powered?) tool that can make him say a different word? (I'm posting this same question in the Premiere Pro community, in case that is the better place for this.) I checked, he does not say the word anywhere else in the speech, so I can't pull it from elsewhere and edit it in. 

I'm thinking of on DLSR cameras you can bracket exposure, take photos as flat exposure and then +/- 2/3 or 1 or whatever. Is that possible on Adobe Audition? I've searched on the Internet — and maybe I'm not searching for the right thing — but found nothing.

I downloaded the trial version of Adobe Audition. I ended up not using it and I’m not satisfied with it. Now Adobe is trying to charge me 27 euros per month. I can’t find the button to cancel the subscription. It also doesn’t appear in my plans. I do not use the program and I do not have it installed on my computer.

This just started happening yesterday for me and is driving me nuts. I use the 5 clipboards extensively to cut and paste audio while I'm editing but Audition is now randomly but frequently selecting my entire audio clip and copying it to the clipboard. This is then overwriting what I've already saved to the clipboard and instead of pasting the one small audio clip I'm trying to paste, I'm pasting the entire audio file. To workaround it I'm having to quickly copy to my Clipboard and then switch to a second Clipboard before the random Select All/Copy happens. Searching the internet I've found the primary suggestion is to delete the temporary files and/or the preferences and start fresh. System:PCWindows 11Adobe Audition 2025 (but it's happening in 2024 and 2023 as well) Steps I've taken: Backed up (exported) my preference filesDeleted the Temporary directories and restartedReset all Audition preferencesDisabled all of my pluginsCharged my mouse in case it's a blu

How do I manually Import All Media Files to the session folder on my own accord (i.e. at a later time, after hitting 'No' on this warning), or is this auto-prompt the only way that Audition can perform such a function? Is this function executable from somewhere on the dropdown top-menus, and I'm simply overlooking it? Thanks forum.

When I record audiobooks I bill the publisher based on the total finished length of the book. Currently I have to add up the length of all the chapter files by typing them manually into a spreadsheet to get the total. Is there a faster way to do this? For instance, by either: a) seeing or calculating the total duration of all open files in Audition; orb) copying the values in the duration column of the "Files" tab for easy pasting into a spreadsheet? Any other ideas are also welcome. Thanks,Brian

Edit: I updated Melodyne and then it started working, should've tried that first, silly mistake! Gonna leave this post up just in case it helps anyone else 🙂 Hello!I recently got Adobe Audition and although it's been hard to figure out, I'm excited to use it!The one roadblock I've come across so far, is that the melodyne effect doesn't seem to want to load correctly, making it unusable.When I try to use it as a VST it looks like thisand when I try to use it as an AU it looks like this:I was using reaper before, which I still have and melodyne works on it so it's not the end of the world, I can always export and use melodyne and then import it back, but I'd rather use all one DAW if possible! Anyone have any ideas on what's going on?