Audition

While recording the tracks are red, and the levels are very low. Monitor levels appear to be typical.Tried switching out from Native Instruments Komplete Audio 6 to Behringer UMC404HD, encountered the same issue.Has this happened to anyone else? What could I be doing wrong?

HiReally enjoying mixing in Audition however clients always seem to need to change something in the edit after you think you have finnished.So is there a way of sending an updated sequence to Audition from Premiere so you don't have to start the dub from scratch?I am sure that I am missing something, hopefully someone can point me in the right direction.Thanks.

I'm a novice, and only use Audition to edit podcast audio, but when I opened this file for the second time, this happened. There's this random audio clip that repeats over the ENTIRE 40+ mins of the recording. What's repeating is in the red and the actual audio is visible in the green and they clearly dont match. Like I said I'm super inexperienced with the program but hope I explained this well enough. This also now happens when I play the mp3 outside Audition. My producer has the original but wont be able to get it to me for a week. Any advice is welcome, thanks! 

When I export from Audition as a Mixdown, and when I bring it back into Premiere Pro, it sound soooo different. Right now I have a sidechain where the VO dialogue is supposed to go mute, but it somehow goes through and completely bypasses the sidechain effect. BUT in Audition, it works perfectly, and when I export,it  doesn't sound right at all, and my EQ is not as bright as it is in AuditionI have a 2020 iMac 5kOS Venturta 13.73.6 GHz 10-Core IntelAMD Radeon Pro 5700 XT 16 GB64GB RAM

I'm recording Multitrack sessions on Audition CC2018 and from being fine in one session, suddenly all the "arm for record" buttons appeared greyed out in all tracks when I opened a different session - and now the problem is there in all sessions. It won't allow me to arm any tracks to record on them - I can do everything else, but not record.The microphone works fine and I can record in "Waveform" mode - but not in a Multitrack session.I have tried the usual re-starting computer, etc, but the problem persists. Please help!UPDATE:If I create a new empty Multitrack session, that new session works fine. If I open an already created session which already has recorded audio files in it, then  sometimes it works fine, most times it does not - I have not been able to find a pattern (some were recorded some time ago, some are new). In the sessions that have the problem this window (which I had never noticed before) appears while the session is loading:Also, If I create a new Multitrack se

Hello! I use Adobe Audition daily for work and I was checking my Mac's hard drive when I noticed that I still have Audition 2024 installed. Is it safe to delete it? Do I still need it to be installed for any reason? Thanks. -Peter

HiI would like information (link) of where I can download the manual for Audition.Thank youEd[Moved from the non-technical Lounge Forum to the Program forum... Mod][Here is the list of all Adobe forums... https://forums.adobe.com/welcome]

Hi there, I'm working on a Audition project, and one of the files simply stays offline. The file actually exists in the same place it always did. When I try to link the media, it processes it but when it's done processing it says "offline" again. It will not load. What is happening and how can I fix this? Files are stored locally. 

hi there, just have a very quick question.I use the stretch function to be able to edit files faster. Now since today I noticed that above the display (how much the track is stretched), there is an icon with a kind of a clock over it. Who knows how I remove this?plz see photo attached

I have been having repeated crashes when using the spot healing brush to make an edit in the spectral frequency display. The crash happens when I change the brush size (either using a key command or typing in the number manually). I can temporarily fix the issue by shutting down and restarting my computer, but then it seems to happen again after editing for awhile. Any solutions? I am working on Adobe Audition 2025 v25.3 on iMac (MacOS Sequoia 15.6.1)

Anyone know how to fix this? I have no filters applied. Microphone will only pick up vocals. no claps, music, snaps, ambient noise, my cat, you name it. Adobe help went through my computer and their advise was to use voice memo and edit in audition.... 

When I attempt to use any UAD plug in, the software immediately crashes. This has never happened before and started with the latest update.  

Title pretty much says it all, but here are some specific steps to reproduce: Open Adobe AuditionCreate a new, 32-bit audio file.Generate a tone so there is some waveform data.Select the Paintbrush Selection tool and adjust the Size parameter by click-dragging the number or directly typing into the field. This immediately crashes Adobe Audition on my machine. I can sometimes adjust the Size parameter if I am editing an empty 16-bit file with nothing else open in Audition. I have not tried other bitrates or scenarios.  Here's some basic system information. In case it matters, I'm using a third-generation Focusrite 2i2 as my audio input and output device, driver version 4.119.13.33 from 11/27/2023. I hope this helps! OS NameMicrosoft Windows 11 Pro EducationVersion10.0.22631 Build 22631OS ManufacturerMicrosoft CorporationSystem ManufacturerDell Inc.System ModelPrecision 3680System Typex64-based PCSystem SKU0C8CProcessorIntel(R) Core(TM) i7-14700K, 3400 Mhz,

Hello, The audio from audition is no longer working, with no indication as to the issue. I've tried several fixes and none have worked. I even tried deleting and reinstalling, as well as using an older version and it didn't work.  Please help, as no solution has worked thus far. I made a previous post detailing the issue more thoroughly, but it has had no interaction.  Thank you 

Hi everyone, I got a new computer which was a susbstantial upgrade over my old one.On my old computer Adobe Audition ran great and I never had a problem with speed.   But, with my new computer it lags a lot even with no effects and a relatively small number of tracks (3-4). Click File/Save takes a long time Clicking on an audio track and moving it. I'll click and it'll pause for 4-5 seconds and then highligh Hitting play, there may be a 3-5 second pause and same with stopping the playback And more   Current Computer:Processor Intel(R) Core(TM) i9-14900KS 3.20 GHzInstalled RAM 64.0 GB (63.7 GB usable)System type 64-bit operating system, x64-based processor Edition Windows 11 ProVersion 24H2I have a Scarlett 18i8 audio interface.I've tried running without it too. MME or ASIO.I've tried most of the normal suggestions on a Google search for a slow Adobe Audition.Any ideas?   - Jeff

Audition 2025. Have been recording all day. Audition crashed out on me, since then when I go back in to record, I can set up my session but upon hitting record, the timeline is jumping maybe 0.1s for every real life second. Audio is no longer recording, just the odd bit of hiss. Have done a full uninstall/reinstall via Creative Cloud, cleared out the AppData folder, held down Shift when opening, tried multiple different recording devices and all the same. If I open an existing audio file, I can edit that no issues, I just cannot record into Audition. Recording into Windows Sound Recorder, MS Teams etc. all fine. Found one similar post on Reddit, 8 months old, but no fix on there. This is with Audio hardware set to MME as it always has been. If I set to WASAPI, the timeline goes back to normal speed but everything sounds robotic. youtu.be/sZKfhH3sCwc?si=MqMaED482cSqth8E

Hi guys, For some reason, I cannot save or export my multitrack session, all options are greyed out. I can, however, go to Multitrack> Mixdown session to new file to export it, but I obviously would like to save my sesx file. My tracks are all set to master. When I was editing, my audio hardware preferences were set to my headphones, which I have since disconnected and set back to my laptops hardware for both output and input - I'm wondering has this anything to do with it? Ive set it back and connected my headphones again, but still no joy. I'm also running 13.0.4 software. Any help would be appreciated, thanks! 

After upgrading to Audition 25.3 from 25.2, the application will no longer launch, and it crashes instantly. I had to uninstall and roll back to 25.2. I tried to upgrade twice, and immediately after the new installation, it failed to launch. Anyone else having this issue? On a Windows 11 Business 24H2 Lenovo with 128 GB RAM, 2.40 GHz Intel Core. All other Adobe products work fine, and once I roll back to Audition 25.2, the crashing issue disappears.I tried to uninstall and do a fresh install. This did not change the problem. Doing a straight update in Creative Cloud does not work, either.  

I bought my 3.0 sometime between 2003-2008.  I have the original disk.  I have used this program forever.  Recently my computer died.  I bought a new one and installed from the disk.  I used the Serial nUmber, but now it wants an activation code.  Am I screwed?

Hi I imported an .xml project in audition and started working at the project. I realized that some clips should be in stereo but its sounds in mono. So I created all news stereo track and replaced the old ones (that were mono by default), but this didn't solved the problem.Now if from the multitrack project I doulbe click on the clip (the one that sounds mono but I repat it's a real stereo one proof is if I open the file with an external audio player) I see this:as you can see Audition recognise it's stereo, the problem is that one channel is grayed out by default for the stereo clips I have in my project.how to solve this problem please?I'm on a project for a indy documentary and I'm working by a month it's very important for me to fix this issue.thx so much,Dan

Hi. I have two audio tracks, let's say audio track a and audio track b where track a has the length Ta and track b has the length Tb. Track a is composed with segments like Sa1Ta1 + Da2Ta2 + Sa3Ta3 + Da4Ta4… Track b is composed with segments like Sb1Tb1 + Db2Tb2 + Sb3Tb3 + Db4Tb4… Where segment Sa1Ta1 has the duration Ta1, segment Sb1Tb1 has the duration Tb1, segment Da2Ta2 has the duration Ta2… so on. Segment Sa1Ta1 is similar in content to people's hearing with segment Sb1Tb1 but the length of Ta1 is not equal to Tb1, in other word the 2 segments is different in speed. Segment Da2Ta2 is different in content with segment Db2Tb2 and the duration Ta2 is different with Tb2 too. (Abbreviation: S for similar, D for different, T for time, a for track a and b for track b) And so on. Now I want to compare and split the 2 audio tracks into segments. Let's say Sa1Ta1, Da2Ta2, Sa3Ta3… for track a and Sb1Tb1, Db2Tb2, Sb3Tb3… for track b. After tha

I am having issues getting audio to record in Audition with my new BlueYeti (USB) mic. I know that the mic works as I can see the levels moving but it’svery faint. Is there a setting in Audition that I need to be aware of? I havetried in both the multi-track and in the wave form. I have gone to the audiopreferences and the new mic is showing up and is in the record options box. I’m working off a laptop running windows 7. I have even uninstalled Audition and loaded it again.