Audition

We currently have two Rodecaster II podcast boards connected to a MacBook Pro and a Macbook Air. After the latest firmware update on the Rodecaster (Version 1.7.6) and updates to each MAC OS (Golden Gate 27 and Tahoe 26) the Channel inputs coming into Adobe Audition are different! For a while now,  the audio channels on the Rodecaster are sent to the multitrack output with the attached device and source list. Sources 1 and 2 coming into Audition are Main Mix outputs (L and R) so normally, I would route Mic Track 1 > Input > Mono > Source 3 (Combo 1) for that track. Mic 2 would be Source 4 (Combo 2), Mic 3 would be Source 5 (Combo 3) and Mic 4 would be Source 6 (Combo 4) . However, now the multitrack output from the Rodecaster seems to have 2 sources dedicated to each channel! So Mic 1’s routing works fine but then I need to skip an input selection for the rest of my mics. Figuring this out wasted a lot of my time! Here is the input configuration that got my mics on the proper

I am an audiobook narrator and have been recording in multitrack forever, going back and checking every punch in to make sure it sounds okay, adjusting the crossfade, etc. My narrator community has told me this is a huge waste of time and to just record in waveform. BUT EVERY TIME I DO, a small click occurs at EVERY punch spot. I've done everything i can think of to eliminate this, but auto healing these takes more time and effort then simply going back to check my multitrack crossings. Has anyone ever had this issue? These are what the clicks look like every time I punch in, they are noticeable on the waveform and I can hear them. I have it set to snap to zero crossings and I still have this problem.  

Hi all. Just wondering if anyone else is using the Liquid Sonics 'Seventh Heaven Professional' plug in and having any issues?When I try to bounce down a mix the plug-in effect / audio isn't bouncing  with the rest of the stems. Any thoughts? Latest version of Audition. Mac Ventura 13.7.4 

Anytime I position my mouse pointer to a different position in an audio file (in Adobe Audition) and left click the mouse a vertical line gets created in the audio file .audio file. Those lines totally screw things up in general. e.g.; The playback volume is changed and it’s a total pain to get rid of them. They only started appearing recently and I have checked al preferences, but found nothing that turns them off.  My install download appears to be dependent upon the Adobe Creative Cloud but when I run iit to re-install the app, this version (CS5.5) is not available.  A fix is urgently needed. Please advise. Thx.

I produce a weekly radio series (Analog Masters) devoted to classical LPs and 78s. I regularly use Audition to transfer audio from the original source to a digital format. Since the most recent Windows update (late August 2026), I have noticed an audio problem that was not previously audible. Natural fades (such as at the end of a movement) are no longer smooth. One or more ‘bumps’ in audio level are noticeable as the last note fades. I use a Behringer U-Phono UFO202 unit for analog-to-digital conversion. My computer is a recent Dell running Windows 11. I had the most recent version of Audition, but as a test I reverted to 25.6.6. This did not cure the problem. I have also restarted my computer and double-checked all audio settings. Is anyone else experiencing this issue? Any suggestions? 

i think i may have misckicked somemething, all of my audio was in streo and half of it turned into mono, i tried going to  Edit > Convert Sample Type, set Channels to Stereo, and click OK. and saved and it still displays them as mono even when they are shown to have a left and right channel in the files panel please help, im a bit on a newbie, so i dont understand everything 

All of a sudden I cannot Fade In or Out in Audition. Under Clip-->Fade In all of the options (No Fade, Fade In, Crossfade, etc) are grayed out. None of them are working. Likewise for Clip-->Fade Out, same problem. Currently running Audition Build 12.1.4.5. All of my Favorite Effects disappeared at the same time, but I will write up a 2nd post for that. Help!

My Adobe subscription was renewed in August as per my American Express statement charge 279.71 via Adobe.LY/ENUS.  I need to access Audition and it is asking me for a password.  Please advise. 

Hello Adobe Community! I am looking to shorten some music tracks for an upcoming dance performance event, and rather than just fading songs out at the end I am looking to cut out repetitive sections of the songs. Does anyone have any advice for doing this in a way that makes it not obvious to our audience that the music has been edited? Any tips on clean transitions in a song when a chunk has been taken out?  For context, most of my experience with the adobe suite has been for graphic design, but I am learning this program as a hobbyist and am by no means doing this professionally. I am also a dancer and often have to shorten songs to fit into performance time slots, so I am hoping to gain a better understanding on the best ways to do this.

The last update I did for Audition (26.3.0.79) lost all my custom keyboard shortcuts. If I remember right, the update glitched and I had to uninstall and reinstall Audition. I added my custom keyboard shortcuts again and all of them work fine except for two shortcuts to two custom favorites I created. Every time I quit Audition and reopen, those two shortcuts are gone, all the rest are still there, include 3 other shortcuts to custom favorites. I have tried using different keys combinations as shortcuts but it still happens. It’s as if there is a limit of 3 shortcuts to custom favorites. I am using a relatively new iMac with M4 processor. Tahoe 26.5.2.

Adobe 1.5 adds “.24” to the file name when I try to save MP3 files. It has worked well up to today. These files are incompatible with sites so I cannot submit auditions as a voice actor.

Does anyone know how to record a teams meeting without it picking your outside audio? I am on the phone with them but we are seemingly just going in circles. I will share an update if there is one. I just want it to record the audio from the meeting, not me (I am a producer).

Audio experts, please help me set up the effect so that the clean guitar sound has a reverberation and echo effect similar to the guitar sound in the attached audio file.Thank you.

マルチトラックセッションの１トラック上においた音声クリップを１００以上ほどに区切って分割してあるのですが、これをCDのトラック分けみたいに、分割したクリップをそれぞれのmp3ファイルとして一括で書き出したいと思っています。できればあらかじめ分割した各クリップにあらかじめ名前をつけておいて、それに基づいたファイル名で書き出しできればいいのですが、もしかすると分割された各クリップを一個ずつ右クリックして書き出すしか方法がないのでしょうか？

How do I stop double screens appearing when I open Adobe Audition 3

Hello, everyone.First, I am new here, so I might need guidance.I am a fan of a game called Command and Conquer: Red Alert 2, and I decided to mod it. Some of my units needs new voiceovers from voice actors, and some of them contributed to the mod.My question is, how do I make a Walkie-Talkie effect that is almost perfect like the game does?Here is examples of voiceovers with walkie-talkie effect that the Game use:idesmod.waviconmob.wav igisee.wav​ Here is an example of a voiceover for a unit in my mod with no filters (RAW), voiceover by https://www.georgeexley.com/ Invader - Select 1.mp3 I have tried methods, but I can't give even a similar fashion. Hoping more in this community to help me.

I'm experiencing a massivly annoying issue in Adobe Audition 26.3.0.79 on a MacBook Pro (M3 Max, 36 GB RAM).Issue:Audible scrubbing works normally when I first open Audition. However, after working for a short time in a Multitrack Session, audible scrubbing suddenly stops working completely.Normal playback continues to work perfectly. Audio output is fine. Only the audible preview while dragging the playhead disappears.I can reproduce the issue after actions such as:Zooming into the timeline using the MacBook trackpad (pinch gesture) Sometimes after using Shift + Backspace ("Delete and Close Gap" / Ripple Delete)Once the bug occurs:Playhead still moves normally Playback works normally Audio files are fine Only audible scrubbing is goneThe only way to restore scrubbing is to completely quit and restart Audition. After restarting, scrubbing works again until the bug occurs again.This makes precise podcast editing almost impossible.System:Adobe Audition 26.3.0.79 MacBook Pro 16" (Nov 2023

When exporting a multitrack mix down of the entire session, I go into the format settings and change the bitrate of the MP3 settings from 192 Kbps to 64 Kbps. The export works fine. However, the next time I use multitrack mixdown during the same session the bitrate has been reset to 192Kbps.Is this by design or a bug? I really can’t see a reason for it being by design and it always ends up a file that is WAY too big for my use and I have to go through the process again resetting the bitrate to my desired rate.

Hi everyone,I’ve been doing some testing lately within Audition regarding export settings for web-based audio delivery. While most platforms still default to MP3, I’m seeing a significant shift towards AAC (M4A) for better transparency at lower bitrates.In my recent workflows, I’ve found that a 320kbps MP3 is almost indistinguishable from the master, but the file size can be a bit much for heavy mobile users. On the other hand, a 192kbps AAC seems to hold the high-end frequencies (16kHz+) much better than an MP3 at the same bitrate.I’d love to get the community’s perspective on a few things: When exporting for web or social media, do you still stick to the classic 320kbps MP3 for maximum compatibility, or are you moving towards AAC? Has anyone noticed any significant 'dithering' issues when converting high-sample rate (96kHz) projects down to standard 44.1kHz during the final export in Audition? What's your 'sweet spot' for bitrate where you feel the quality-to-file-size ratio is p

I started a free trial for Adobe Audition through the website. I made an account, set up payment, etc. I got a confirmation email with the order number. I downloaded Creative Cloud and when I go to install Audition the only options I get are, “Free Trial” and “Buy”. There is no download or install option. If I click on “Free Trial” or “Buy” it tells me I already own it and prompts me to “Get Started”. This takes me back to the website where it asks if I’m an individual, student or business and more payment plans. No install options here either. I can get to a point where I can download Audition_Set-up, but this just takes me back to Creative Cloud where the loop starts over. Am I missing something?

My backing track has a soft piece of piano music I want through out my project. Only the first 15 seconds is usable, because after that, the track adds other instruments that I don't want. I can easily cut the first 15 seconds out, and apply the remix function in Audition to extend this to any length I want. And Audition perfectly finds transition points that are seamless. The problem is, I want to preserve the very end of the original audio clip, and tack it on the end. It has a nice outro that ends the track. When I just use a crossfade in Premier Pro, the transition is too obvious. Is there a way for Audition to perform a similar remix function on the end of my outro part of the original, so it also seamlessly finds a way to join these together? As it did in the other remix process?

I was succesfully running Adobe Audition in Windows 7 thru a Fire Pod to record. All was well until I finally had to upgrade to Windows 10. It wouldn't run Audition, so I purchased an upgraded version of the fire pod - Studio 1824c. They are not playing together well at all!I can start a new session & arm the channels I want to record on. However, all chanels pick up all the inputs without seperation, even if I arm all 8 chanels with only 3 of them containing a signal from a vocal or an instrument. How can I fix this?

I’m running Audition on a powerful computer - 9900x 12 Core processor, 64 GB DDR5, Samsung 9100 NVMe SSD, Windows 11, etc…  The Windows, Creative Cloud, and Audition installations are clean and updated, as are all drivers, etc.Audition takes close to fifteen seconds to open the first time I run it after startup or reboot.  After that, it opens almost instantly.  I’ve performed a Shift startup which resets everything, and a full uninstall/reinstall.  I’ve also cleared the cache.  The issue remains.Any ideas?

Why does my Amplitude Statistics look like this? I have so many numbers showing  in Peak Amplitude and I can’t see them all? first screen shot.Training videos always show this number as something like this, second screenshot.The file is in Mono.

We're seeing an issue with registerKeyEventsInterest() on macOS in an Audition CEP panel.On panel initialization, we call __adobe_cep__.registerKeyEventsInterest() for all relevant key codes (including metaKey) and handle Cmd+C/V/X/A ourselves (execCommand() / navigator.clipboard) . This works correctly, we able to copy and paste the text inside the panel.However, after the user performs a Copy operation inside Audition itself (e.g. Edit → Copy or Cmd+C on a clip), the panel stops receiving Cmd key events entirely. Clicking back into the panel or re-focusing an input doesn't help.Is this expected behavior? We don't see this issue in other Adobe applications, such as Photoshop and Premiere. Is Audition expected to behave differently? OS: MacAudition version: 2026Plugin framework: CEP