Bug Reports

Meidia Intelligence's audio search has a bug: after importing more than a certain number of audio files, importing additional audio files will result in the new audio files not being searched at all.

ProductPremiere 26.0.0Operating SystemmacOS Sequoia 15.7.3HardwareMac Studio (M2 Ultra)Problem DescriptionWhen using Object Mask and assigning it to Opacity in an interlaced sequence, the Program Monitor turns black.Steps to ReproduceLaunch Premiere Pro 26.0.0Create a new projectCreate a sequence with interlaced field settings (Upper Field First or Lower Field First)Add a clip to the timelineApply Object MaskAssign the Object Mask to OpacityExpected ResultThe Program Monitor should display the image correctly when Object Mask is applied to Opacity, regardless of whether the sequence is progressive or interlaced.Actual ResultThe Program Monitor becomes completely blackSetting Sequence Settings → Fields to No Fields (Progressive) resolves the issueWhen Display First Field is enabled in the Program Monitor, playback is visible, but the image turns black when playback is stoppedWhen the sequence is set to Upper Field First, the image appears correctly after rendering, but not consiste

I'm at a loss. I haven't been able to use Premiere Pro 2025 at all since it was released, and 2026 doesn't work either. 2025 lags incredibly badly and takes about 20 mins to boot up each time, and 2026 doesn't work at all. I've tried it on two different computers with different specs and still no luck. Did a complete reinstall on both of them as well.  All of these tests were using 1080p footage at 23.976 just to try and get something to work across both computers and software. Everything was working fine until around Novemberish of last year, I could edit and scrub through 4k log footage with no issues, then the lag started coming in. Every version of each software was installed on a 2TB SSD on each PCComputer 1 Specs:Processor AMD Ryzen 9 3950X 16-Core Processor 3.49 GHzInstalled RAM 64.0 GBGraphics Card NVIDIA GeForce RTX 3070 Computer 2 Specs:Processor AMD Ryzen 7 7800X3D 8-Core Processor (4.20 GHz)Installed RAM 48.0 GB (47.1 GB usable)Graphics Card NVIDIA GeForce RTX 409

Hola abro premiere y cuando quiero abrir un nuevo proyecto, el programa se tilda y no responde, no puede cerrarse. Estoy desesperado ayudenme, me pasa con todas las versiones 25 y ahora tambien la 26. antes todo funcionaba normal con estas versiones. Graciass

In the newly released v26 - As title describes.If you set a keyframe to anything other than linear - when inputting a value, the keyframe will revert to linear.-except if a keyframe have separate interpolation choice (spatial / temporal)(title edited by moderator for clarity)

This issue made me loose my temper for it happened just before I was gonna finish my project in a very tight deadline.The issue: Premiere Pro Effect controls window looses focus under certain circumstances.How to reproduce:- Create a multicam sequence.- Place it on the main timeline.- Double-click on the Multicam to send it into the Source monitor (Adobe, why does double-clicking on a multicam send it to the Source viewer, but douple-clicking on a Nest open it?! When will this disgrace be fixed?!).- Go inside the multicam (while the multicam sequence is still in the Source viewer).- Try to color-grade or change any motion effects for any clip. This is what you will see:  Win 11 24h2, RTX 4080, 14700K, 64 Gb of Ram, Premiere Pro 25.6.3

Since recent Premiere Pro updates, I’m experiencing significant lag and overshoot when adjusting UI controls. Sliders, numeric controls, and mask handles respond late, then jump unpredictably, making precise adjustments very difficult.Where it occursLumetri Color sliders (e.g. Exposure, Contrast)Effect Controls panelMask position/shape handlesBehaviourInput is delayed when draggingValues update suddenly and overshootIssue affects UI interaction, not playbackWhat I’ve ruled outNot related to media performance (proxies make no difference)Not RAM or CPU related (32 GB RAM, mid-spec gaming PC)Playback resolution, render previews, and timeline complexity do not affect the issueSystem detailsGPU: NVIDIA RTX 3060 (CUDA enabled)Driver: NVIDIA Studio Driver 581.57Monitor: 60 HzOS: Windows (64-bit)Additional notesCUDA is correctly enabled and recognisedIssue persists in new, empty projects.Behaviour does not occur in older Premiere Pro versions, suggesting a regression.QuestionIs this a known UI

IssueIn a Production, using Automate to Sequence copies clips into the destination project instead of referencing the original project that contains the media.   Steps to reproduce Create a Production. Create Project A and import media into it. Create Project B and create an empty sequence. Open Project B and make the sequence active in the Timeline. Open Project A, select clips in the Project panel. Choose Clip > Automate to Sequence and complete the operation.   Expected resultClips placed into the sequence in Project B should reference the media in Project A, consistent with normal Productions behaviour.   Actual resultPremiere Pro duplicates the clips into Project B, creating new project-local instances of the media instead of referencing Project A.   Screen recordingNo   Adobe Premiere Pro version25.6.4 (Build 5)   Operating systemmacOS Tahoe 26.2   Hardware iMac Retina 5K, 27-inch (2020) 3.6 GHz 10-Core Intel Core i9 AMD Radeon Pro 5700 XT

Hey.I've been working with Premiere Pro for more than 4 years and since 2025 I've had a very annoying problem which persists even on my new laptop bought in late 2025.Whenever I use the program for more than 20 minutes it starts to lag a lot. Or, whenever I speed up video playback (L), it starts lagging, as you can see in the video.  I really don't want to switch to Final Cut Pro, but the same projects I have for Premiere run smoothly and perfectly there with no issues.Please help out if you can. 1. Premiere version 24.2.1 (Build 2) - but every version lags (even the latest one!) 2. Brand new MacBook Pro M4 Max, 36 GB Ram, MacOS Sequoia 15.6.13. I've used proxies AND preview files to deload CPU/GPU usage and problem still persists4. Unfortunately, I don't use ANY effects so I'm basically having issues with two 5-minute H.264 videos which should be a piece of cake for my laptop. 

I just installed the LATEST Premiere Update to 26.0.0I am now unable to add Video clips to an Existing Project AND to NEW Projects after the 1st Video clip is added. Hand Cursor with a Circle and Line appears.I rebooted PC, tried numerous existing projects, created multiple NEW Projects, the same issue persists.I can add Multiple Audio Clips, anywhere within the project, I just cant add Video clips.

Hello everyone,I've been trying all day to get my Adobe Premiere to work but no success. I have Windows 11 with newest updates and Nvidia RTX4090 with latest Studio driver 591.74. I tried Premiere 26.0 and older versions. It always crashes on startup. Right now it is 25.6.2Things I tried:1. Removed all Adobe programs and Creative Cloud and installed a fresh version2. tried starting Premiere with pressed Alt Key and deleted all profiles and cache3. installed newest drivers from Nvidia I really need Premiere to finish my work and I have no more ideas what to do.  

This is so frustrating and has happened twice in the last month. I've no idea why it happened the first time, I assume this last time it was because of Premiere updating. Even then, I don't think it's supposed to do that and there should at least be a warning before it updates (I didn't even know it was going to update today). Anyway, you're supposed to be able to get old shortcuts back, which I've tried by putting my backup shortcuts file into my current Adobe folder on my desktop, this has done absolutely nothing. My backup file is currently inside the Mac folder inside the Profile-username folder within my main Adobe folder. I've got really urgent projects due and this completely messes everything up when I'm trying to get work done quickly. Is there any solution?  

Safe margins are blown way off in full screen mode. Makes the whole margin system untrustable if it doesn't lock in properly.. 9x16 margins in full screen mode9x16 margins in regular UI mode

After updating the Premiere version, OGG files are no longer supported for import

When i use project manager to save my original files to another folder it is not sending the files i selected. Instead its sending my entire memory card. Also it is creating sub folders for each individual clip. 

During playback, the Program Monitor plays normally, but the Timeline UI freezes.While the sequence is playing:- The playhead in the timeline does not move- The timeline does not scroll- Clicking clips or the timeline has no immediate response- Inputs seem to be queued and are only applied after playback is stoppedIf I press the tilde (~) key to make the timeline fullscreen, the issue disappears and the timeline updates correctly in real time.The problem only occurs when the timeline panel is docked.1. Open Premiere Pro 25.x2. Open any project (including a new empty project)3. Use the default docked timeline layout4. Press Spacebar to start playback5. Observe that the Program Monitor plays normally, but the timeline UI freezes6. Stop playback – the playhead suddenly updates and queued inputs apply7. Press tilde (~) to fullscreen the timeline – the issue no longer occurs- The timeline previously worked normally in the same environment- The issue started suddenly without any Premiere Pro

I just created a new project and when I loaded the video into the sequence it is showing a pink/light red screen in the viewer (Program). I have cleared Cache, checked all my settings etc. When I open Lumetri is shows a normal screen and when I export the video is also normal. Any bugs reported on this? PremierePro updated today and is running on v.26.   

Hi there,  I have a long time bug that has existed over several versions of premiere. This has been posted before by other users, but not for a couple of years so thought it worth starting a new post. The issue is that the mouse sticks, usually when selecting a timeline. So, for example, i may have four timelines open within the same pane. Only timeline tabs are in that pane. I will click a timeline. I will then click in, say, the effects tab which I keep in a pane with the effects control tab and the source montior tab. But what happens is that the mouse has 'stuck' so it thinks i have dragged a timeline to the same pane as the effects tab. So i then have one pane with three timelines in it, and another pane with effects, effect controls, source monitor and the timeline that i had clicked on earlier. A quick search has revealed others have the same (or very similar) issues: https://community.adobe.com/t5/premiere-pro-discussions/sticky-and-jumpy-playhead/m-p/1

Another day - another bug. This is what I started to see when trying to render and replace an AE comp inside Premiere Pro to something with an alpha channel because I need transparency: Now imagine a Pr sequence with as many AE comps in it as this (the rose ones):Imagine how insanely slow the timeline is. And you cannot render and replace the comps. Pre-caching is not an option because I trim the comps, I move them, I apply transitions to them and everytime the cache resets. And you cannot render and replace nests. Not at all, sir. Steps to reproduce - make a complicated project with dozens of AE comps (made via Dynamic link of course). Try to render and replace them with a codec that supports an alpha channel. Profit. A disgrace board below (I'm not mentioning the Film Impact problem...): Again, in Davinci Resolve, that apparently have better programmers, you can render and replace just anything. How can that be that a small australian company nailed it and the dear big fat Adobe can

I'm not sure if it's by design or a bug, but since it brings certain problems during Pr>Ae>Pr workflow I'd consider it a bug. The bug: an inconsistency between time stretching in Premiere Pro and After Effects when using Dynamic link workflow.What happens: when you stretch a clip via the Rate stretch tool or using the Speed\\Duration context menu and then send it to After Effects, there the stretching becomes completely different.Steps to reproduce: - Place a clip in the timeline. Define a reference timestamp and put a marker on the clip there. Mine is at 00:00:54:21 where there's a scene change in the video, so I can easily identify if anything is wrong. Choose an easyly identifiable part of the video, like a part of a scene change. Also put a marker on the timeline in this part to see how far the markers are from each other when you stretch the clip.- Slow down the video with a Ctrl+R command, say, up to 15% Now the markers are at a long distance from each other. Note that the

Premiere Version : 25.6.2I noticed this issue in a previous beta version as well. But with the latest update, the snap function doesn't seem to work. The snap button is on. Also while dragging clips to the timeline, the clip body is invisible. Please check this video(Title updated for clarity by moderator)

After the 25.6 update, the "Toggle Direct Manipulation" tool (Transform) disables itself after moving forward 2 clips.  My previous workflow was to select the program window, engage "Toggle Direct Manipulation" via a shortcut, then use the mouse to drag on the screen and reframe each individual clip. I'd then move forward and back between clips and between the first/last clip frames using keyboard shortcuts. From version 25.6 onwards I have to re-engage "Toggle Direct Manipulation" every time I move between 2 or 3 clips. Up to version 25.5, "Toggle Direct Manipulation" would remain engaged until I manually disengaged it. By trial and error I've found that if I lock the clip's audio track, the behaviour of the tool works as expected. I've now gone back to version 25.5 and the behaviour of the tool is back to normal. I'm on a M4 Pro Mac running Sequoia 15.7.3

As I recently reported here on the forum, I bought a new video card, the RTX 5060 Ti. I was having problems with crashes and black screens during export, which was resolved with the new Nvidia driver from January 5th. However, I hadn't checked its performance in the Windows Task Manager. Today, while editing a video of just over 10 minutes in Full HD, I decided to open the Task Manager to check its performance. I saw that it was being used between 19% and 22%, and the processor was under higher load, sometimes reaching 100%. The usage between CPU and GPU should be balanced. The low video card usage is extremely frustrating. I am waiting for an Adobe moderator to tell me something. I respect the export process, which took 12 minutes to complete, and the video card usage varied between 19% and 22%. Below are some screenshots of how I configured the video card after installation. Remember that the old driver was uninstalled using DDU, resulting in a completely clean installation, followin

Premiere v 25.6.4MacOS Ventura 13.7.8 When opening a Team Project, timeline or source clips won't play from keyboard or window play buttons. Media is all loaded.I've found the solution is to change my Workspace from a User one to one of the default, everything plays. When I go back to a user workspace everything plays fine as well.

Imported a sequence into a project, then when i went to relink files, the window popped up but was blank, couldnt see any files at all. (see mock up photo, couldnt replicate it on my machine, but the issue happened on a different computer) Restarting prem helped for one file but then happened again with the next file. Using latest prem 2025, Apple mac studio M2 Tahoe os.