Bug Reports

(Title wrong, I confuse the two )Video below should explainWhen using “Ripple edit tool” it will not “grab” the cut26.0.1This happens specifically if you try to grab the cut from the audio track, and not video trackAnd also, more specifically, this tend to happen when the audio track is collapsed fullyHowever, it’s impossible to grab and adjust cuts from the video track, as a huge timecode will cover the audio waveform (another post earlier)

Seeing it multiple times this week in in premiere 25.3 25.4 and 26.0.1.  Importing a .2+ hour gopro video at 1080 resolution.  The audio is there, but it processes the audio and only shows me the first half of the waveform. I have deleted the peak files dozens of times, and it craps out after the long reopen/generate process, only to crap out with less than half the waveform available. The recent changes absolutely SUCK!!! I have to wait at least 5-10 minutes for the waveform to generate to become visible (unlike the old version where it would start showing you the parts of the waveform that had processed as as soon it is available Also “Generate Audio Waveform” function has never done anything.. absolutely nothing hapens. “Render selection” or Render Audio sometimes kicks it into working but not lately This program is SO fucking maddening--without this visual ability to see where the songs of the band stop and start, it is insanely time consuming to chop up and edit video. 

My program window. The only way to fix this is to turn off Mercury Playback Engine GPU acceleration, which is no longer available. I occasionally run into a glitch where the image in my program window gets scrambled. Not only does this make editing a nightmare, the glitch often persists even when I render, making my final product unusable.In the past, I had been able to turn off Mercury Playback Engine GPU acceleration, which fixed the issue. However, Adobe has recently made the ill-advised decision to remove that option. Adobe has written an article explaining that they removed the option, but no explanation for why they did that or what to do when the GPU renderer creates problems.  https://helpx.adobe.com/premiere-pro/kb/software-rendering-update.htmlI’ve looked online, and Adobe recommends that I start up Premiere holding the shift key and selecting “Use Software Rendering”, but that option has apparently been removed.There is no option for “Use software rendering.”I cannot fix thi

LUTs applied in Lumetri work, but after saving and reopening the project, the LUTs don’t reload. Color correction is lost and must be reapplied each time.

Hi everyone,I’m experiencing a strange issue when exporting through Adobe Media Encoder.When I export directly from Premiere Pro, everything looks perfect — but when I send the same sequence to Media Encoder via Queue, I get random visual glitches (broken frames, artifacts, or flickers).Here’s what I’ve already tried:Updated both Premiere Pro and Media Encoder to the latest version.Deleted Media Cache and Media Cache Files.Reset Media Encoder preferences (Ctrl+Alt+Shift on launch).Tried both Hardware Encoding and Software Encoding — same result.Exporting directly from Premiere works perfectly, so the problem seems to be on the Media Encoder side.System details:Device name: DESKTOP-KSKHTV7Processor: Intel(R) Core(TM) i9-14900HX @ 2.20 GHzInstalled RAM: 32.0 GB (31.6 GB usable)Device ID: 3AC5D6EC-ECB2-410A-BA30-FA75179D5FD5Product ID: 00342-21183-14825-AAOEMSystem type: 64-bit operating system, x64-based processorPen and touch: No pen or touch input is available for this displayGPU: NVID

Premiere - 25.3.0AfterEffects - 25.3.2Apple M2 Pro, OS Sequoia 15.5 (24F74)The [T] missing fonts icon appears even when the only font is installed and renders correctly and 'Sync Missing Fonts...' does nothing. I have Adobe Fonts turned off to ensure fonts I include with my mogrt all work and attach correctly. To narrow down this issue and find the offending font, I created a sample mogrt with two layers(a text layer and a solid) and an empty dropdown control. After installing the mogrt in Premiere, the [T] icon appears, indicating a missing font. The 'Sync Missing Fonts...' menu is not greyed out, but nothing happens when selecting it.  The only font used in the mogrt displays correctly in the Program Monitor when on the timeline.I have tried this with a number of fonts and variable fonts seem to trigger it more often than static fonts, but I cannot find reliable pattern.My intent is to sell my mogrts and I reallly want to avoid the perception of errors i

In Premiere Pro 26.0.1, I have a multicam clip in the source monitor and I am doing transcript-based editing. If I go to the wrench on the source monitor and switch to composite video (to see only one camera), then I click in the text panel to jump to a point in the transcript, the video no longer moves to that point in the transcript. Scrolling and highlighting also stop working when in composite video view from a multicam clip.  If I then close the clip in the source monitor and reopen it, or reopen another multicam clip, and leave it in multicamera view, the text window still does not re-align with the video, and won;t let me navigate by clicking in the text.  The only way to get text-based editing to work again is to close Premiere, restart it, and stay in multicam mode.  This is very frustating because when doing my assembly, I just want to see the main camera in the source monitor not the other angles - I want to see their facial expression up close, not all the camera options. T

Importiere Video Material, klicke im Projektmaterial Fenster mit der rechten Maustaste auf das Material, es öffnet sich eine Auswahlleiste. Klicke auf Rohmaterial-Einstellungen. Es sollte sich nun ein Fenster “Media Settings” öffnen. Und das passiert leider nicht. 

Issue - playback freezes for about 3-6 frames immediately before a simple cut in the sequence. I think it’s happening before the cut, not after.Reproduce - place simple clips in sequence, trim the clips down, place more than one clip. I’m working in 4096x2160, 23.976 progressive. The footage is XAVC S codec from a Sony FX6. I’m playing off a Samsung T7, which should be plenty of read speed for 240 Mbps footage.Expected result - playback should be smooth; no frame drops.Actual result - playback holds on the same frame for 1/8th to 1/4th of a second.Screen recording - this is available privately. It’s an unreleased film, and I cannot show any of the footage publicly.Adobe Premiere Pro version - 26.0.1Operating system - Windows 11 25H2, build 26200.7840GPU driver version - Nvidia RTX 5070, 591.86Video format - the footage is XAVC S codec from a Sony FX6.Comparative info… I have not noticed this stutter with my other PrPro 26 projects. This has been happening since I promoted the .prproj f

When I open premier pro at initial launch or while switching workspaces, when I go back to the audio workspace and select audio mixer, the tab is blank, no faders, to track effects, nothing.I have to go to workspaces on the top drop down menu, select Audio Mixer to turn it off, and then click it again to turn it back on and that bring the mixer back into view with all faders and effects tabs showing.This bug is intermittent, but it happens once or twice a project. This also happens on both my M4 Macbook Pro and my Custom Built PC (4090, Intel)  

Premiere automatically replaces a deleted video file with another file with the same name found in other folders on the drive. More details. I was given two flash drives containing video from different cameras, even from different shooting days. But the file names in the folders are the same. Both are Sony cameras. The files in the first folder start with C001, and the files on the second flash drive also start with C001. I import these files into Premiere. All the files are in different folders. Each camera has its own Composition (Sequence). I start editing. I find the defective shots and immediately delete these files from the computer drive so they don't take up space. Previously, Premiere would immediately display an error that the file is now unavailable (it can't find the file), and Premiere would open a window asking me to find the file manually. I see which files it can't find and then simply delete them from the project. But now Premiere simply replaces the deleted file from

프리미어 프로 사용시 이전에는 자막 템플릿 각각 사용시 각 저장된 폰트와 컬러로 글귀 수정이 가능했으나 이제는 이전 사용 폰트와 컬러로 자동 변경됨. 새 시퀸스로 하든 자막을 새로 만들든 똑같음.  

IN version 25.6.4 and version 26 if we put an audio in timeline it repeat itself . full song not playable and that song works fine in older version same time . tried to clean cache and etc files bt none of worked , tired of this bug . please help me asap. thank you 

Using Izotope Nectar 2 plugin (AU version).  When opening the plugin, it only opens a grey window.This is new for PP2026 and PP2026.0.1.  PP2025 works fine.I am on OSX 26.2 (25C56)  

I considered sending this as a feature request, but the inability to link mono and stereo audio tracks feels more like a bug than anything else. There seems to be no reason why I can’t link different types of audio tracks, but if I have a video track, a stereo track and a mono track, PPro refuses to let me link them, for no apparent reason.

Im Anhang ein Screenshot, wie das bei mir aussieht. De- und Neuinstallation haben nichts genützt

I’m trying to composite graphics footage created in After Effects in a premier timeline and I’m getting horrible ghosting effects on my graphics. I’ve tried rendering with straight and premultiplied alpha channels but it's still horrible so much so our client picked up on it. The files are rendered out as ProRes 4444. Any ideas would be welcome. 

I have very slow exporting using a J2K export plugin in Premiere Pro 26 under Windows 11Previous version of Premiere Pro (25) works as always.As a example, a encoding of a feature film that will take bout 6 hours in Premiere Pro 25, Premiere Pro 26 says 14 hours!.The author of the plugin says to me that "That's strange. Since the plug-in hasn't changed, it sounds like a Premiere bug to me."The plugin is a free one you can download and test it in this website:https://fnord.com/

When I play the video it takes a while to appear, I think there are conflicts with the cache files, even though I already restarted the Mac, uninstalled and reinstalled Premiere, and still get the same error

Hello, I'm from Germany and I'm experiencing the well-known issue with Adobe Premiere Pro after updating to macOS Tahoe 26.0.1.Unfortunately, it has been very difficult for me to find a satisfying answer, since the internet — and this forum as well — is full of similar problem reports and responses.Of course, I have already sent a support request to both Apple and Adobe.I’m a professional video editor, and at the moment I can’t work properly with Premiere because of this performance problem.Has anyone found or knows a reliable solution to fix this annoying performance issue?I’ve already tried everything I could find online, but nothing has helped so far.Do we all have to switch to DaVinci Resolve now?Thanks for your valuable feedback!Dirk from Germany Hallo, ich komme aus Deutschland und habe das bekannte Problem mit Adobe Premiere Pro und dem Update macOS Tahoe 26.0.1. Es ist für mich leider sehr mühsam, eine befriedigende Antwort zu finden, weil das Internet und auch dieses Foru

Shortcuts cannot be used when entering Japanese or Korean on WindowsOn a Windows computerIf the character input setting is "Japanese input (IME)" instead of "English input", the PremierePro shortcut will not work.By the way, on MacintoshShortcuts work even when “Japanese input” is selected.Some users have complained about what they can do with Macintosh but not with Windows.Windowsパソコンにおいて文字入力設定が、「英語入力」ではなく「日本語入力（IME）」になっていると、PremiereProのショートカットが効かない。ちなみにMacintoshにおいては「日本語入力」の時でも、ショートカットが効く。Macintoshではできるのに、WIndowsで出来ないことで、一部のユーザーから不満の声があがっている。   한국어로 단축키 사용 불가Windows(윈도우)에서 문자 입력 설정이 ‘영어‘가 아니라 ‘한국어’로 되어 있을 때 프리미어 프로에서 단축키 사용이 불가합니다.Macintosh(맥)의 경우는 22.6.2 버전부터 한국어로 단축키 사용이 불가능해졌습니다.한국 유저분들의 경우 윈도우와 맥 모두에서 한국어 단축키 사용이 되지 않는 불편함이 지속되고 있으며 한국 유저분들이 작업하실 때 큰 불편을 겪고 있습니다.   Mod note: Title and text of the post was changed as the same issue affects Korean editors.

Product: Adobe Premiere ProVersion: v.26.0Operating System: Mac Tahoe 26.2Issue Summary:When right-clicking inside the Timeline panel and selecting “Link Media,” nothing happens. No dialog box opens to re-link files. The command appears unresponsive.Steps to Reproduce: Open Premiere Pro. Open an existing project with offline media. Go to the Timeline panel. Right-click inside the Timeline panel. Select “Link Media.” Result: No action occurs. Expected Result:The Link Media dialog box should open, allowing relinking of offline media. This happened in every version of premiere previously where I cloud re-link from the timeline, and all the files that were missing in the NESTED parts as well had that. Now i have to individually go to every nest to re-link files. This slows down my workflow significantly. Actual Result:No response. The interface remains unchanged. No warning or error message appears.Additional Notes:– The issue occurs in the previous version of Premiere Pro – Rest

I have Premiere set to save the cache in my D drive. I’ve had this set this way for some time and never had an issue since I did it.Today, the program keeps saving on my C drive, in the public folder for some unknown reason, even though it’s still set to put those files in my D drive in a set cache folder. 

Hello,We have developed for my company (a digital media) a whole series of MOGRT templates created with After Effects CC 2025.Each template is very complex. It allows the user to select: a brand (which affects the template colors), a language among 9 available (which affects the called font, kerning, leading, etc.), a format (16:9 or 9:16), and then template-specific parameters (text input fields, X/Y position offsets, safe zone display, etc.). Since the launch of these templates within the company two weeks ago, we have been facing massive feedback from users, which completely calls into question the workflow we had planned to improve the branding of our video productions.In this thread, I will detail a first issue related to fonts, affecting certain letters within certain words (it appears very random).The issue can be observed both during editing in the timeline and in the final export.The letters that seem to lose their connection to the correct typography are chosen complete

I'm running 25.4.1 and I am not able to import an XML from Resolve. When I try to import the file I get an error message without any details or explanation.   Has anyone else run into that lately?