Bug Reports

I'm trying to export a film in 4k proress422 that has a 3840 x 2304 aspect ratio, 5:3 resolution. Adobe randomly displayed the film in the timeline as 16:9, but is still listed as 3840x2304. The black bars on the sides are missing and if I scale down the clips they just become smaller 16:9 clips. If I change the aspect ratio to 16:9 then the picture becomes slightly bigger and cuts off the areas around the border of the clips. When I export it, the film is in the 16:9 ratio even though the settings are still listed as 3840x2304. QuickTime also changed all my previous 5:3 sample videos into this 16:9 look, but has 3840x2304 as its aspect ratio in its settings. I don't know what the hell is going on where it even changed the aspect ratios look with clips and videos I exported a long time ago when this glitch randomly happened yesterday. I was wondering if anyone else has dealt with this problem.

25.6.2 build 1Video shows it all. These apps continue to degrade in quality. 

- have had the issue since 21st of nov, - program monitor stuck in full screen mode and unable to edit pictures and txt at all,- unabel to use it in general at all, cant click on the program monitor with mouse, non responsive.  

Hello Community! After 5 months of fighting with Premiere Pro I finally discovered what caused error code -1609629695. I believe that many people have been affected with it. I have a lot of people texting me about this problem cause I have made 3 posts about it in the past.SIMPLE ANSWER - DISABLE CREATIVE TAB INSIDE LUMETRI COLORI finally found the root of the problem and what is causing it. It's the CREATIVE pannel in Lumetri Color. Disabling it makes the error go away.  Issue – While exporting a video on versions 25.2, 25.3, 25.4, 25.5, 25.6 in random timestamps we get a GPU error code -1609629695Steps to reproduce:1. Add any .look file to the lumetri color CREATIVE pannel (I tried both - avaiable with premiere pro and made by myself/downloaded) 2. Export a videoExpected result – Video exported without any problems and bugsActual result – Error code selector 9, error code: -1609629695Adobe Premiere Pro version&nbsp

So I went through the long and difficult process of importing LUTs "definietly" in Premiere. Thank you to all your contribution, it helped me a lot. Here's the necessary informationComputer : MacBookPro M1 ProOS: Tahoe 26.1Premiere Version : 25.6.2The problem is : if you plan to put a LUT to a video, everything works fine. But I work so : I put LUTs on effect Layers to avoid editing each video and putting a LUT of each (maybe I should do so, but when I don't have time, I skip what I can) So i tried to apply a LUT from the ones I imported on an effect layer, but it just doesn't work, it takes the ones from the technical list and replaces them with the position of the original.Here's where my LUTs are : and the proof that my LUTs folder in the premiere app is empty: Here's an example: I try to select a LUT to put on an effect layer Premiere selects the eighth of the list (the last one from the originally provided LUTs) I try to select a LUT to apply on a clipPremiere has selected the rig

Latest Premiere Pro, 25.6.2, is freezing in a way it never has before. No crash dialogue box or grey screen no matter how long I wait, cursor still moves around but the program is completely non-responsive, just frozen in place, will not even close. Only solution is to "End Task" using Task Manager. Windows 11 24H2AMD Ryzen 7 5800H with Radeon Graphics (3.20 GHz)32.0 GB RAMNVIDIA GeForce RTX 3060 6GB

The timeline keeps freezing in several different ways, especially when it gets filled up with heavy projects like weddings or long multi-layer edits.When the timeline gets busy, the program starts lagging heavily, then completely freezes, and sometimes it even crashes and causes the entire system to hang.This issue makes it very difficult to work on large projects.Please investigate this problem urgently, as it seems specific to the 2025 version and wasn’t happening on previous releases.

In just the past few days, Premiere Pro has become basically unusable. Any time I try to click Export, Import, or even the Home icon, none of the buttons respond. I try installing an older version, but Creative Cloud just keeps them in an infinite loop of downloading. I try to uninstall Premiere and reinstall it but Creative Cloud doesn't let me uninstall Premiere. Incredibly frustrating, hope there's a fix. This has only been since Tuesday.

When trying to add adobe stock to a timline in premiere pro you get an error message to upgrade to the newest version of premiere pro. When running verion 25.6.2. You cannot add the stock to your timeline.

Mac Sequoia 15.7.2 Premiere v25.6.1 Closed captions not visible and there is not control in the Viewer wrench for toggling them on and off.Closed captions are required for broadcast tv. 

The "Slip Tool" or Y button on a Mac is laggy and does not perform as it should. I can not get an accurate slip of the footage when I drag it left and right. 

Premiere 25.6.2, Mac OS Scenario: I'm playing a timeline with a multicam clip in multicam mode. I see a place I want to cut. Without stopping playback, I key "add edit," then I hit spacebar to stop, press a key to change the camera angle (so it changes without making a cut), and then hit spacebar again to resume playback. All in very rapid succession. Unexpected outcome: even though the timeline resumes playing and I see what I'd expect to see in the viewer, the playhead in the timeline stays stuck to the place where I last stopped. And if I press spacebar again, instead of stopping playback, Premiere instantly starts playing again from where the playhead is stuck, this time with the playhead moving forward as expected. Nothing about this makes sense! To emphasize, I'm pressing this sequence of keys very quickly, almost like a piano arpeggio, so you'll need to do this to recreate it. I do this about 900 times a day, the bug happens quite often. Sometimes many times in a

when i export -> send to media encoder instead of exporting from premiere it strips the BAKED color on 1 out of 3 cameras and makes it log flat.  full context: i brought in clips from a hard drive and when i brought them into premiere i can see the full color. i didnt add color or anything. and when i hit export from premiere it maintains the color. i had a long rip that i didnt want to export through premiere because it would lock up the program from doing anything else so i sent the timeline to media encoder and i could see in the preview window as it was exporting through media encoder that it had stripped one camera of color and made it log flat. which is wild because i didnt add any color to it. the fact that media encoder is exporting something that isnt representative of what my timeline is tells me thats a huge bug. mac os tahoe 26.1 (apple m2 ultra). premiere version: 25.6.1 (build 2). (please send me a private message if you want to see a screenshot. i dont want

If I move a file in the finder, and then reconnect it in premiere, the media path of that item is sometimes weird, which means that premiere won't recognize it as a duplicate item if it's being reimported. And then, if the item does get imported again, it won't consolidate because premiere thinks it's two different items because they have two different media paths. By weird, I mean that the media path shown in premiere will for some reason add on an additional folder that doesn't actually exist. File Path: /Volumes/ZZZZZZ/ZZZZZZ/_ALBUMS/_TENSION/ATMOSPHERE TENSION FLUTTERING/ATMOSPHERE TENSION FLUTTERING/FTMX_LOCKDOWN__FULL-MIX.wav In that file path, that bolded section does not actually exist. Below is a screenshot of two project items, both of which are exactly the same file at the same finder location. Using the getMediaPath method in extendscript returns this: /Volumes/ZZZZZZ/ZZZZZZ/_ALBUMS/_TENSION/ATMOSPHERE TENSION FLUTTERING/./FTMX_LOCKDOWN__FULL-MIX.wav I can't reliably reprod

Même avec le correctif de ce matin (25.6.2 build 1) les fichiers récents enregistrés avec la v25.5 ne s'ouvre plus (message d'erreur). Ce qui est étonnant c'est que j'arrive à ouvrir des fichiers plus anciens voire très anciens (24.x) !!!!

FrameIO v4 updated panel in 25.6.1 is a little better but still doesn't export and shows incorrect frame rates on export profiles which seem to be unchangeable. H264 presets are either stuck at 29.97 (or 30 for Vimeo preset) despite your sequence settings. There's no option to create custom presets that I can see in the extension (custom just shows a list of one you may have created in the past. Mine had a VOB preset which I don't recall ever creating so maybe it's baked in there. ) still having to break out to browser use and not able to use markers in the timeline. FrameIO is truly broken, anyone know any decent alternatives I need to carry on working somehow! 

Product: Adobe Premiere Pro Version: 25.6.1 Platform: macOS (Apple Silicon) Summary In the latest update, the Frame.io v4 integration blocks exports unless the user toggles “Save as Separate Asset”. Only after enabling that option does Premiere show the folder selection dialog. After selecting a folder, the user can disable “Save as Separate Asset” again and export normally. This behaviour is confusing and inconsistent with previous versions. Problem The Export button remains greyed out even when inside a Frame.io project. The UI shows no way to select a Frame.io folder unless “Save as Separate Asset” is turned on first. The folder-selection dialog should appear automatically when exporting a new version, but it does not. There is no visible warning that a folder must be selected for versioning workflows. The workflow forces a setting change that is not related to versioning, which suggests a UI logic bug. Steps to Reproduce Open any Premiere Pro project linked to Fra

Made a ton of new custom presets with test names. When I finished up and decided to change their names everything was fine until I closed PP for the day and started a new session the next day. All my custom effects name reverted back to their old names. No matter how many times I change and save it, the names keep changing back.Im on windows 10, latest version of PP

Premiere Pro 25.6.1 sucks!My Premiere Pro just updated automatically, and it's causing me a lot of problems. It even happened on the day the client made the edit before it was actually used. The client blamed me for my inability to work, even though I didn't know what was going on. That's why I blamed myself.If this continues, I'll be permanently switching to Davinci and canceling my Adobe Cloud subscription, which I've been a customer of since my student days (15 years).And now, I still can't recover the backlog, I can only wait..which makes me very, very disappointed.

I am so tired of this HECV codec cannot be installed issue.  (premiere Pro)Hundreds of people have been complainging about it for SEVERAL YEARS now.They cant fix it though.  I know you need another PC for the workaround.  I dont have one.  Should not need one.Considering unsubscribing to adobe completely fix your product already!!and no I am not going to reinstall anything I have spent literal days on this issue time and time again over the years.  It's on their end but they wont find a fix for it

前方選択ツール等を使って、作成済みシーケンスのクリップ間に別なクリップを挿入したい、或いは一度カットしたシーンを伸ばして復活させるのに、まとめて移動したい。 そんなときにカーソルとカット&ペーストではなく、ドラッグで1フレームくらいの微調整をおこなって、なかなか位置が決まらず左右に動いたりすると、トラックが細切れになって残ってしまう。

If you use the Text panel's transcript feature for text-based editing, you'll know how annoying this bug is.  If you try to highlight text which spans over a cut in the timeline, the highlight will fail the first time, then work the second time.  The highlight itself does not show up in the text panel the first time, and the in/out points are not placed.  This only happens when the attempted highlight crosses a cut.  See the video below for an example.   Premiere Version 25.5.0 (Build 13)Windows 10 Pro 22H2

When I edit a caption, the font is smaller than the size of the font in the text workspace This happens every time when I double click on the caption. This did not happen on the last version. Any solutions?   Premiere Pro 2025 V 25.3.0 (Build 84) Windows 11 home Processor AMD Ryzen 9 7945HX with Radeon Graphics 2.50 GHzInstalled RAM 32.0 GB (31.7 GB usable)System type 64-bit operating system, x64-based processorThird party- beauty box (Title edited by moderator for clarity)

check spelling doesn't work and has not been working for some years now!! at least on mac. come on guys!

I used to set some templates to make sure ,all of my footages are the same.But recently it just don't work.As my screen shot,when the template drag on timeline,the text appearance setting doesn't fit.