Lightroom ecosystem (Cloud-based)

I just updated Lightroom iPad. Where are the Quick Actions as stated in the release notes? Thanks.

I haven't found anything related to this in online searches, so i thought i would ask Lightroom users.   I have Lightroom mobile installed on my iPhone 7 and when i use it, the phone gets very hot. If the ambient temp is 90 or better (which happens quite often here in Florida), the phone will overheat and shut down after a while. I used it without that happening yesterday (ambient temps around 75), but the phone was still quite hot. I have a pretty thin Spigen case on the phone, and it doesn't get hot with anything other apps.   Has anyone else experienced this?     Thanks,     Steve

Lightroom Brush Option is drawing a weird line when I start to select an area. This won't stop happening. I've closed and open the program numberous times. Updated masks and AI features constantly and it's still happening.  I can't use the brush option at all and I am on a deadline. I don't know how much longer I can keep using Lightroom or my subscription. 

Hi everyone,   I've used Lightroom Classic for many years and made the switch to Lightroom (CC) as soon as I could edit local files without having to import them (around v.7 I believe).  Up until very recently I've had no issues whatsoever and really enjoyed the updated interface and how fast it runs.  However I've encountered an issue recently while travelling. If I'm connected via a VPN or simply offline, I cannot access my local files whatsoever, the files simply do not show up and I'm left with an empty page.  From searching the community I understand the software sometimes has to connect to check license etc... But I still should be able to every now and then edit my local files offline.   I've tried: Uninstall everything Adobe from my Mac, used Adobe cleaning tool, reinstalled it, same issue.  Are there any other users having a similar issue, are you able to work offline at all? Thanks for the help!  

I have 3 iPads with Lr iOS Mobile. When I play a slideshow from an album of photos, 2 of the iPads (oldest and newest) give me a choice of 3 transition types. (Three dots top right) but the one I want to use as a picture frame only gives me 1 (wipe) transition. This same iPad used to show me all three transition types. I want the "flip" transition. How do I get it back? I am using the same set of photos to test with all three iPads, I have deleted the app and re downloaded with restart  and have logged in and out of my adobe cloud membership. I used both adobe chat and a phone call without any results and I was upset when I got the summary from the phone call that said the case is "closed". v10.3.0

Lightroom is exporting all photos in my stacks. When I got to export "26" final edits, I select all stacks, and go to export "26" photos, then when it goes to the export window it shows "Export 57" photos. It exports the final edit along with all the changes and nr photos.   I don't know how to change this and this has never been an issue.          

I just bought and installed Adobe Lightroom to my Windows 10 pc today. I only uploaded a small portion of my photos using the desktop version, 1,122, because my primary initial need is for organization. I stopped here to test out the facial recognition features. The people view option has been enabled, I enabled in upon installation. All my pictures are of people. It has been over 6 hours since upoading all pictures and they are all "synced and backed up" However, whenever I click on the People tab it still reports "No People Found Yet. Synced photos will be analysed in the cloud. Ensure your photos are synced and check back later."  What am I doing wrong?

With the latest upgrade, the mask effect preview no longer works.  In the previous version, I can see this preview after tap and hold on the image after pressing the slider.  This feature also worked in the Light Panel when adjusting Black and White points.  This no longer works properly.  On this version, I can see the mask effect preview for a split second then it's gone.  Is this a bug introduced with the new version?  Or is there another method in gaining this functionality back?  Call me old school but I use this feature all the time in my edit workflow.   

When entering metadata in the iOS/iPadOS app, the text field for "caption" forces the text to be title case. I assume this was something intended for the Title field, but it's hugely irritating for the caption field. 

I have used Lightroom iOS for many years. Never had a limit on how many files you could export to camera roll until most recent update. Now only allows me to export 99 at one time. Looking through settings and options with no luck changing. Please go back to no limit! There's no reason for a limit and now I'll have to do it in batches or from a computer. 

Issue: No more than four photos can be taken in a row without re-opening the camera. Lightroom Version Number: Lightroom Android v9.5.0OS Version Number: Samsung One UI v6.1 (Android 14) Hardware: Samsung Galaxy A33 5G Steps to reproduce: 1. Start Lightroom's camera mode by any method and in any mode. 2. Take a photo by pressing the shutter button (blue circle or physical volume button). 3. Continue taking photos from the same camera in the same session. Nothing special.   Expected result: For each photo taken, the screen should 'blink' black for a moment and a preview of the photo appear in the lower left. Each shot should also appear in the Edits and Gallery sections.   Actual result: For the fifth and subsequent button presses, the blink animation plays but no preview is shown and the affected pictures don't appear anywhere in the app, as if never taken. If the flash is switched on, it still triggers even for the ignored shots. No error message is shown at any point.

Haptic response is gone on temperature sliders after this update?! That was a life saver when editing 😞

Hi guyz i need help for solving a issue while signing in on google account on lightroom   Error:   Access blocked: authorisation error The oauth client was deleted error 401: deleted_client   im facing this issue only on the application on the web when im signing in its good but while on application its shows the error  

Since at least June 19th—shortly after the release on Lightroom 7.4.0 and 7.4.1—Lightroom for both iPadOS and iOS frequently start with the following error:   "Lightroom detected an issue, please quit and restart the app to resolve. Error code: 19650929"   As a result of this, I have been unable to effectively use Lightroom on either my iPad or iPhone for a week. (My iPad is my preferred Lightroom device.)   Troubleshooting Steps Restart Lightroom: This will typically throw the error again, although occassionally it loads successfully. I often need to restart the app 5+ times before it will successfully load. Restart i(Pad)OS: No different than just restarting Lightroom. Reinstall Lightroom: This will load successfully, ask me to login, and then begin synching my photos. The next time I start Lightroom, however, I will typically get the error. I've done this around ten times on my iPad.   Technical details   iOS iOS version: 15.5 (19F77) Device: Apple i

Mac OS Sequoia 15.3, Lightroom version 8.1 When using the Level tool in the crop panel, the line does not start at the crosshairs as it used to.  It starts below the crosshairs just to. the left of the bubble.

Once I did the update for LR mobile, now the recommended tab for presets, it says "service not available"........ It only did this once I did the newest update..

After rotating a photo within the iPhone's lightroom app, the adjust white balance feature does not align itself with the rotation. So one cannot use the eyedropper tool since the colour on the wheel doesn't match the colour in the rotated photo's pixel

Roundtripping to PS with as a smart object does not carry over the RAW development settings done in LR. If I do the same thing in LrC it works as expected. Please see the screencast I recorded:   https://youtu.be/sDTwr69MByE   MacBook Pro M1 Max Sequoia 15.2 Lightroom 8.1

I an getting a folder called "auxiliary" showing up when I export a file(s) to a seperate folder. Nothing appears to be saved to this folder, but it appears the first time I export a file. If I delete the folder it does not reappear if I expoet more files.   Ian Winter    

Product: Adobe Lightroom Version: 8.1 Operating System: MacOS OS Version: Sonoma 14.5   Issue: When exporting a User Preset to the same file name, despite the warning about the file being replaced, the file is not overwritten.    How to replicate: 1. Create a User Preset 2. Adjust White Balance Temperature 3. Right Click and Export Preset with filename Test.xmp 4. Open the Test.xmp exported preset file in a Text editor like TextEdit and Note down the Temperature value. (should be something like: (crs:Temperature="5000") 4. Change the Temperature value in Lightroom 5. Right Click and Update Preset with Current Settings 6. Right Click and Export Preset, select the same location and file from Step 3 7. Click Replace when the warning about overwriting the file shows up. 8. Open the preset file in a Text editor and look at the Temperature value.   What is expected: To see the changed temperature value   What is observed: The same, unchanged temperature value.  

I recently got a new computer. When I try to use lightroom CC, the tone curve is blank. Even if I adjust exposure settings or drag the curve, I can't view the histogram. It's still compltely fine on my old computer. I tried quitting and restarting and nothing has fixed it. Any suggestions?

Hello, I would like to use lightroom to correct the distortion by the ETZ Adapter ring. And when I want to choose the profile manually, the select box only jump to "内置" , and can't change anymore. But I use the lightroom classic, it works well. Is it a bug on lightroom or my wrong operation?       The normal on lightroom classic:     And by the way, is there a way that I can correct at jpeg by using profile manually? There are only few profiles at jpeg profile. However most profile (like sigma 90 dgdn can't be used at jpeg but it can be used at raw)  only can used at raw?  

I'm so devastated.  I finally finished all of my edits from a photoshoot, all 7,613 photos, on my ipad and went to open the desktop version to send them off to Smugmug, just to watch as slowly, thousands of edits were reverted. The amount of time it's going to take for me to go back through each of these photos and undo this bizarre bug is just heartbreaking.    The worst part? This isn't the first time this has happened on this same batch of photos. Something has to be done about this. I made sure my iPad was fully synced before opening the desktop, and it still appears to be a consistent issue.   Everything is much faster to edit from my iPad, as the desktop app takes far too long to load each photo when going one by one. 

Lightroom has been having issues with some, but not all video files, saying it cannot import because I do not have disk space for thousands of petabytes (which isn't even possible). I have had this issue with videos from both my GoPro and Nikon Z30. Lightroom thinks the file size is enormous, but everywhere else the file size is correct.   If I import with Browse and navigate to the camera folder, it does not have any issues, but that's not a good fix for me when I have to hunt through an import of 400 files to uncheck the culprits so I can import the rest normally. 😞   I have no idea why this is happening or how to fix - I am trying to do more video editing, and it'll keep being a pain in the butt if I can't get to the bottom of it. Happy to take any advice.   Thanks, Sarah

I'm running LR 8.1 on a Mac (Sequoia 15.1.1), and there seem to be some really severe bugs. First off, some of the slider controls will suddenly disappear - I can see the number value, but not the slider itself (e.g. Temp under Color, but I can manually enter a new number for the temp, which is very time intensive when I'm trying to hit the sweet spot). In the Info section (metadata), the fields and their titles will initially appear, but if I've entered something, those fields may disappear and I only see the titles (and sometimes I can click on the solid grey area below the titles to make the text appear when highlighted, but not always). Closing and restarting LR seems to help for a bit.   Finally, the memory issue with LR has gotten even worse with this version. I have to close and restart the app a couple of times a day, and *never* leave it open overnight, because otherwise it'll freeze up, with a system message saying that it's using nearly *60GB* of application resources (