Photoshop

Hallo,ich habe ein Farbprofil eingerichtet und möchte dies als PDF speichern.Was genau muss ich unter den Punkten FARBE dann anklicken? Nur die Proof-Einstellung? Und was passiert, wenn ich beides markiere?Danke und Grüße,  

I am running Photoshop 26.3.0 on a PC running Windows 11, 64 bit, version 24H2.  I am using the RAW interface to adjust images then opening them in Photoshop. Two or three images open OK, but then an error message appears on opening another image: ' The embedded ICC cannot be used because the ICC profile is invalid. Ignoring the profile.' If the image is opened, all colour information is discarded. How on earth can this be fixed? If this is a bug, it needs to be fixed!

I realize it’s probably a stupid question that has a simple answer, but I can’t figure out how to do it . I’m trying to create an action that selects the gradient tool and draws a fixed gradiant on all four edges of the canvas. The action that I have created is able to draw the top and the left gradient just fine, however I can’t figure out how to do the right and bottom edge that will work with different sized images? The other issue that I am having is that after the gradients are drawn, the selected tool goes back to whatever tool I had been using and doesn’t stick with the gradient tool, which is what I want it ti do after hanging the opacity from 100% to 30%. Any help on this would be greatly appreciated. Thanks in advance - CES.

where can I change the shortcut for the line size/weight in photoshop? this is assigned to "[" and "]" and if I'm not mistaken it used to be connected to the brush size shortcut. my brush size shortcuts have been changed to "Q" and "W" and I'd like the same for the line tool but I can't find the setting?

Issue: When exporting a file with multiple artboards in Adobe Photoshop online, the file gives an export message of "Your document was exported but its Content Credentials couldn't be attached or published", despite not having any content credentials in the original file. The exported file is 0 bytes in size and cannot be opened. The original file was created as a .psd (in PS 26.4.1), then saved in the cloud and attempted to edit/export using photoshop.adobe.com. Photoshop version: Photoshop online.OS: MacOS 15.2.Chrome Version 134.0.6998.89 (Official Build) (arm64) Steps to reproduce:Open an document with multiple artboards in Photoshop OnlineSelect "Main Menu> Export As..." and export the image to your local computer as jpg or png.Inspect the file on your local computer and see the file size is 0 bytes. Expected result: File are downloaded correctly, images with multiple artboards are downloaded as multiple files.Actual result: Only a single file is downloaded with

Is this possible?

Several people have asked the same question (or variant) that I am asking below and it never really gets answered completely or resolved and then the threads are locked so no one can ask for more clarification or help.I checked task manager and it says that shows that Adobe Photoshop has VERY HIGH POWER USAGE, and it says that cpu and memory are both under 30% utilization.

Macbook Pro M2 Max I am at my wits end with this problem. It is extremely repeatable. I have tried clean installing Photoshop to no avail. About half the time I alter a curve adjsutment layer Photoshop will hard crash to desktop. Crash Log below: ------------------------------------- Translated Report (Full Report Below) ------------------------------------- Process: Adobe Crash Reporter [64466] Path: /Applications/Adobe Photoshop 2024/Adobe Photoshop 2024.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/A/Adobe Crash Reporter.app/Contents/MacOS/Adobe Crash Reporter Identifier: com.adobe.crashreporter Version: 14.0.0 (14.0.0.202310292158_2f28289) Code Type: ARM-64 (Native) Parent Process: Adobe Crash Processor [63466] Responsible: Adobe Crash Processor [63466] User ID: 501 Date/Time: 2024-06-07 11:38:06.1127 +0100 OS Version: macOS 14.5 (23F

Hello, the font window doesn't come up in the original position, but it comes up in the weird middle position, how do I get the font window to float in the original position?   The version is the latest version.  

Hi there,  I am unfortunately having an issue across all of my Photoshop files where after typing in set dimensions for the canvas or a layer, they are resized to a slightly different number once unselected and reselected again. This number is usually around 0.1mm off of the intended size typed in.  I am struggling to find a solution anywhere else online and this issue is causing great amounts of trouble in my work as I am now unable to provide work / submit work at the exact dimensions as required by a client.  Adobe Photoshop 2025 26.4.1macOS Sequoia 15.3.1 Thank you.

All of a sudden Photoshop, current version with recent update on subscription, crashes when I try try to resize.  I first flatten the image and disgard the unused layers.  Then I go to image>size  I have constrain proportions on and I changee W and H to 1000 pixels, I leave as 300 dpi, I resample using Bicubic Sharpener, it says the new file will be 2.86 M and when I press OK, photoshop just closes, any ideas  there is no error message, just closes and when I open PS back up its like its there as a full PSD filing but nothing more, does not even show as recents???  Help.

I need a quick workflow that fills my selection with white and exterior of the selection with black, after export the final image in binary image format 

Can anyone tell me why there is such a difference in RGB colour from Photoshop 2021 to Photoshop 2022?And more importntly how to fix it?Below is a comparrisson image. Same file. One jpeg saved yesterday and one saved today    

 I'm working on a fundraiser to help save our flag football program and trying to create mockups using a bunny file. When I import the file and use 'create a clipping mask,' the colored sports design only applies to the outline instead of filling the full backer. How can I make sure the design fills the entire backer? Any advice would be greatly appreciated! If there is a tutorial anyone can recommend? etc.   [email removed from public forum]  

Why is this refine edge tool not working?? 

Bonjour ! Lorsque je souhaite utilisé les filtres de caméra Raw via photoshop une fenêtre avec le message d'erreur suivant apparait : Accélération GPU Requise" Caméra raw nécessite l'accélération du processeur graphique pour retoucher des photos " J'ai désinstaller , réinstaller photoshop , installer une ancienne version , réinitialiser les paramètres mais rien ne changeJe suis sous Macbook Pro M3 

Hi there, Can anyone help! I'd like to know how this texture effect was created? Thanks!

How do I change the default keyboard shortcuts for filling selections with the foreground/background color?

I understand that for people not familiar with a marquee zoom workflow, scrubby zoom is more intuitive. But for people who are used to it, it's a superior workflow, allowing you to zoom in on exactly the area you want. Yet each new version changes where the switch to turn it off (and doesn't remember your preference to banish scrubby zoom to a long holiday with Mephistopheles).  Which leaves me begging: how to I once again ban it so I can use this critical tool in the manner that best suits my needs? I spent 15 frustrating minutes hunting through the preferences to find this and couldn't.

環境：Windows10/　Photoshop CS6 バージョン13.0 アクションの登録でウェブ用に書き出し→保存する画像のファイル名を定義して画像書き出しを登録したいのですが、jpgで等で書き出して登録したのにも関わらず登録したアクションを実行すると、拡張子がhtmlでファイルが書き出されてしまいます。 保存する画像のファイル名を定義しないと普通に画像で書き出されるのですがファイル名を定義して書き出しを行いたいため困っております。 登録されたアクションを見ると、「カスタムファイル名」部分が定義したファイル名.htmlとかってになって保存されてしまうことが原因のようなのですが、解決方法を探しきれず、どなたか解決方法をご存じの方はいらっしゃいませんでしょうか？  

Since updating to Adobe Photoshop 26.4.1 for Intel Mac, I am unable to use the "style" menu of the rectangle selection tool.  When clicking on it, instead of letting me choose a proportion or no set proportion, a greyed-out menu appears saying: "Generate an image" and "Import an image".  I don't understand. I use Mac OS Sequoia 15.3.2.

Im honestly tired of having to convert the files with the "edit > convert to profile" menu option. I export from LR straight to PS. I dont know if that has anything to do with it. I doubt it. I just want to be able to open all my pictures in sRGB without having to do the converting. I do save for web but if the profile is converted before hand, the colors will change.