Photoshop

When you mask a group, then unlink a group from the mask and moving this group around on the canvas, the content in the mask is not refreshing, you have to “shake it” to force it to refresh.can you please fix that?

In every version of Photoshop I’ve used since Save for Web was introduced, you’ve been able to use the eye dropper tool to select a color in the Color Table (visible for GIF and PNG-8 formats), allowing you to locate, lock / unlock colors, etc.This no longer works.I’m using version 27.7.0 on Mac.

Do I need to register my Photoshop Extended CS6 or just carry on using it as is? it is a perpetual EULA but want to make sure I can continue using when they discontinue it

Dear Adobe Support Team,My name is Kamal Abdel Nasser, and I’m passionate about video editing and digital design. I truly love Adobe products — especially Photoshop, Premiere Pro, and After Effects — and I’m working hard to make video editing my future career. Unfortunately, my current laptop cannot run the latest versions of these applications due to limited hardware specifications. I would really appreciate if you could guide me on how to legally access or subscribe to older versions (such as 2017 or earlier) from official or trusted sources. I’m willing to pay a monthly subscription for these older versions, as buying a new high-end laptop is not affordable for me right now. Thank you very much for your time and understanding. I’m looking forward to your kind support and advice.

The image here is not from my pc, I found it online to help illustrate my problem.I do not know Photoshop well at all, I have only recently begun to use it, so I am a beginner. My problem is that eventhough I have turned off auto-save shown above, it still automatically saves the file I am working on. Perhaps every 15 minutes or so. It slows down my pc tremendously. I want to turn off auto-save. I thought I had, but it still on. I searched online for how to turn off the auto-save and did that and have not changed any other settings. I checked earlier today and the auto-save box is not checked. What is wrong? Only yesterday I finally found out how to upload a file to the Cloud and did it with this very large file that I am working on. It is currently 10GB.  Before I did that I saved it and opened it on my pc, which is older, and may not be powerful enough for PS, but it has the minimum specifications needed for it. When I worked on the file which I have on the pc, it was slow, but not a

está demasiado lento, no pasa de 93% las generaciones, se demora y se cae la página constantemente, duro editando una sola foto todo el día. no es la Ram, no es la memoria, no es el navegador, ya hice todo lo posible y no eh podido trabajar ya hace dias. 

Hello,I have:M1 Pro Macbook Pro, 16 gb ramI have a file that I can't export it PDF because of an error. I have read on the internet that I should uncheck the " use graphic procesor" before I should try export it PDF. I tried it and it didn't work.When I unchecked the graphic procesor the images went FADED as if I worked in cmyk ( or when you hit "cmd+Y " ) After that I checked the ' use graphic procesor ' as it was before and restarted the PS.PRobleem is here: The images are still FADED with the processor toggled on and I don't know what to do.After a few restarts now i'm in a complet mess. The photos are faded when the procesor is on and normal when the procesor is off. Before that it was the other way around.I need to have my procesor on because of the performance and I don t know what do to.One thing: If i m exporting the photo, the colors are normal.I have:- Reinstalled PS- Update MACOS- Open the PS with CMD SHIFT CONTROL- Delete cachUPDATE 1: From what i m seeing it's like photosh

getting this type of codes during tutorials such as select 2201 and now chose 1042 

Starting with 400x400 image size, with 40 pt text layer. 2 letters, kerned at 5.Wanting to create the same text layer with the same kerning at various larger sizes. For example: 500x500 image size with 50 pt text layer, 1500x1500 image size with 150 pt text layer etc.Simply typing the larger text layer in the larger image size can produce different kerning positions. Normally one px difference.To confirm what the new size should be regarding the correct kerning, I have tried every way of testing I can find using upscaling techniques and they can all give different results. It also changes depending on what size I start with to upscale.Increasing image size Increasing image size with Scale Styles  Duplicating the layer, sending it to the new canvas and increasing the font pt Converting to smart object, opening text layer as .psb and then increasing font pt Free transform as a shape and smart object Free transform as live text (this can produce kerning differences within dead zones)If I

this won’t allow my words

Hi ,Sorry, I selected the wrong category. To clarify, the device is computer.I’m using the Brush tool in Photoshop on the web with a Wacom pen tablet. When I draw with the Wacom pen, I often get the following warning, as shown in the attached screenshot:This seems to happen when the pen is touching  surface for an extended period of time while using the Brush tool.I have already tried the following:Set the Wacom pen side button / side switch to No Action Disabled Press and Hold for right-clicking in Windows Control Panel > Pen and TouchHowever, the same issue still keeps happening.Is there any way to prevent this warning from appearing, or is there a known fix or workaround for this issue?Thank you.

I am modifying this mirror frame image. With the application of a mask it will be shown in different contexts / colour ways. The NEF image was opened as a Smart Object via Camera Raw.I need to make a few changes to the photo ie: removal of the fine casurina needles (leaves) etc.Is there a non-destructive or destructive way retouching which updates with the Smart Object?I think I have exhausted all options. Hopefully a photoshop fairy will appear!Thank you    

The move tool is no longer an arrow. It looks like a paint tool. 

Photoshop is running very slow for the last few days when it was running perfect before. I have used the program on different computers, so it is not the computer. 

Hi, I am working with LR 14.2 and PS 26.3 on Mac Mini M4 with Sequoia 15.3.1.LR preferences are set to use PS as external TIFF 8bit image editor with Adobe RGB 1998 color profile (same profile is set in PS).I import a RAW image into Lightroom, apply a user preset, export to photoshop, make some changes, save as TIFF and close. Returning to LR I find the TIFF image with a develop adjustment applied.I have noticed that sometimes is the same preset of the RAW image, sometimes there is just the small develop icon in the bottom right corner of the thumbnail which seems no changes has been applied.Is it possible to prevent LR from applying any sort of develop adjustment?

It’s been a while since setting up a new install of Photoshop and having trouble remembering how to change this, and hoping someone can point it out as searching isn’t coming up with anything. I want to allow editing of a mask off the canvas edge, such as using a brush or selection fill. For example this vector shape with a glow effect goes outside the canvas area, and I want to mask it using a selection. Currently the selection only affects inside the canvas area, allowing the bits of vector shape outside the canvas to still be there and produce a glow effect. 

Ich arbeite seit vielen Jahren mit Adobe-Produkten wie Photoshop, Illustrator und InDesign. Fachlich sind diese Programme weiterhin extrem leistungsfähig – aber die Benutzeroberflächen und viele grundlegende Workflows fühlen sich seit Jahren nicht mehr zeitgemäß an.Was mich besonders frustriert: Die Programme wirken, als wären mehrere Software-Generationen übereinander gebaut worden. Neue Funktionen, KI-Features und Cloud-Elemente kommen hinzu, aber viele zentrale Bedienlogiken, Dialoge, Panels und Workflows bleiben alt, inkonsistent und unnötig kompliziert.Für professionelle Anwenderinnen und Anwender im Unternehmenskontext ist das ein echtes Problem. Wir zahlen laufend für Creative Cloud, arbeiten täglich mit diesen Programmen und erwarten nicht nur neue Features, sondern auch eine moderne, konsistente und effiziente Bedienung.Besonders im Vergleich zu modernen Tools wie Figma wird deutlich, wie sehr sich Arbeitsweisen verändert haben: Komponenten, Designsysteme, kollaboratives Arbei

Occasionally, I can't transform an object after entering Free Transform mode. The transform box appears, but I can't rotate or manipulate it with the mouse, although entering values directly in the toolbar still works.The Hand Tool also starts behaving strangely—it becomes glitchy and seems to get stuck around a specific location instead of panning the canvas normally.These issues disappear after I close and reopen Photoshop. You can see the problem in the video below:Video captureI suspect I may have accidentally pressed an unknown shortcut or enabled some kind of mode, but I can't figure out what it is. Does anyone know how to return Photoshop to its normal state without restarting the program? Having to reopen Photoshop every time is disrupting my workflow and costing me a lot of time.

When I circle item in Photoshop and click Generative Fill--I get a message-"this feature is currently not available." I can use the Remove feature of that task bar, but not Generative. I have updated, but this has been going on for a couple days.

Since updating to Photoshop v26.10 I’ve encountered a severe bug with layer masks.After using “Remove Background” (or when working with masks in general), painting with black on the mask works as expected (removes areas). However, painting with white does not restore any masked areas. I’ve been working professionally with Photoshop and masks for years – this is not a workflow or settings issue (foreground/background colors, brush mode, opacity/flow, etc. have all been checked). The problem persists across files, even after restarting the Mac and testing on completely new documents.This issue appeared only after updating to 26.10, so it seems to be a regression/bug introduced in this version.

My workflow is built around the regular use of various JSX scripts—from different authors, ranging from simple ones with just a couple of lines to complex ones with hundreds of lines. About two weeks ago, I started regularly getting the "JavaScript code was missing" error when running certain scripts. Re-running the same script usually works without problems. Or it causes a repeat error. It's unpredictable. Otherwise, Photoshop works reliably and quickly.My Windows 11 system is up to date and has all the latest updates. All device drivers are up to date. I'm confident my hardware is working correctly (including because no other applications experience errors, and the operating system logs contain no records of hardware issues). Strictly speaking, nothing is installed on my computer except Photoshop, Office applications, a browser, and the operating system. The paths to all system folders and user profile files contain only Latin characters.I read all the available materials on this top

I select my photos in Bridge and open them one at a time to edit them in Photoshop. I can open a few images by double-clicking on them in Bridge, and then suddenly Photoshop doesn’t react anymore when I want to open them. The only thing that helps is forcing Photoshop to stop (because when it happens, I can’t close photoshop the normal way anymore for some reason) and restart it. It gets quite frustrating when I have to do it every four or five photos. 

Hi,chapter 1 verse 1 of tracing around an object. Black for brush colour, Create the brush diameter and adjust the hardnesss slider until the soft edge matches that of the object. e.g. 7 pixels fade off, Q for quick mask and away you go. I trace within the object, so tracing along an aerial wire is a sane achievable task etc.Start tracing then lessen the diameter when you come across a narrow item, e.g a ships tapering mast, or a side view propeller blade, or aerial post etc. FAIL FAIL FAIL.Photoshop despite existing since version 3, has the brush softness change as well, so the propeller blade ends up with a trace far sharper than its soft edge has. e.g  3 pixels.Thats the rule of tracing broken. what should be a constant softness of e.g. 7 pixels is 7 with 5 then 3 then 2 for items that are thin or taper.There should be a setting called keep feather edge thickness, tick it then alter brush diameter, and I use [ and ] keys. Is there such ?As after 30 yrs of working with

 in the photoshop and illustrator, when i follow the suggestion and type CMYK value, the result is totally different to the correct color.how can i fix this? 

Have strong internet connection via Ethernet cable. Happens on Windows 11 wired PC not my laptop connected by WIFI. Photoshop.exe and FireFly is allowed in Windows firewall.