Questions

I've only had photshop for 5 days and I've only been able to create one project because the app will not allow me to create another file. I'll click create file and nothing happens. I've looked into it and I've seen other people with the same problem. I've tried fixes, but nothing has worked yet. I'm using a Mac air, macOS 15.3.2. This is quite frustrating because I was on a free trial and now I feel it's been wasted.. Any suggestions??

I had a script that worked in photoshop 23 where I could copy and paste guides from one document to another, but it is not working in the new version of Photoshop.  Does anyone have an updated script or know how to fix this problem? 

Issue Symptoms:When first opening Photoshop, dragging selections works normally. After using it for a few minutes, dragged selections constantly follow the mouse cursor.Clicking cannot cancel it, Ctrl+D is ineffective, and you cannot perform any other operations. You can only switch to other software or close Photoshop.Version: Occurs on both Windows 11 64-bit and Photoshop 2025/2026. This issue emerged within the last ten days.I've tested two or three Photoshop versions, replaced the mouse and keyboard, reinstalled the operati Sometimes when I click the Stamp Tool, it immediately switches to the Selection Tool.Or when I click the Selection Tool, it instantly jumps to the Selection Tool.How amazing. 

Vorrei sapere come realizzare un progetto con risultati pari a quelli di un certo Samuel MB sui fotomontaggi di personaggi Disney in foto reali, che sembrano davvero presenti. Vorrei una spiegazione passo passo. Grazie.   

Cuando incio fundiona normal, pero a los 10 o 15 min, me sale este error al usar camera raw y licuar

Hi, I want to trace pixel art from a high resolution image but keep the high resolution images resolution high but actually draw on a 32x32 size document.Is there any way to do this. If i were to scale down the image to fit in 32x32 it would lose so much detail tracing would not work. I want to practice making pixel art by tracing is there some way to force a image to overlay at high resolution while the document is only 32x32 pixels.Thanks.

Hello fellow iPad end users, Greetings for the holiday season! My issue is, I currently have a paid annual subscription for Photoshop version 7, but had my subscribed Adobe Photoshop drop my paid subscription mid-stream and limited my access/use of the software application in spite of my fully paid status. Subscription was fully paid on Qctober 25, 2025 to October 25, 2026 and Photoshop dropped my subscriber use to limited 'free-copy' use on October 30, 2025. This is the second time the anomaly manifested itself on Photoshop. The first was when photoshop updated to version 6.1.1 and the second was when Photoshop updated from 6.2.2 to 7; Prior to version 6.1.1. Photoshop would crash when being initialized, fortunately, the problem was resolved with photoshop version 6.1.1. i had to cancel my first subscription and resubscribed on October 25, 2025. I may have to cancel my subscription once again, a second time and rescbscribe to resolve the annoying issue as Appl

I have found an interesting predicament that occurs when editing photos in Photoshop 2026 (27.0.0) and using hibernation mode on Windows 11. Windows 11 will corrupt the Photoshop images if you try to do an upscale on a particular image after returning from hibernation. At first this drove me a little crazy but then I decided to shut down Photoshop and do a cold reboot. When I reopened Photoshop the problem was gone so I have to surmise that Using Windows hibernation is compromising Photoshop memory when Photoshop is being restored. The larger problem I have is that I will normally have as many as a dozen (or more) images open in Photoshop simultaneously. Closing Photoshop and then reopening from a saved list is a time consuming process

Hello. I have suggestion : when in camera raw (open from bridge in macOS), you want to zoom in a precise part of a picture, it ever zoom in the middle and in the bottom third instead of where you zoom in !So to really upgrade the workflow, it must zoom and center the view where you zoom in with the cursor.  I remember it was so a few version ago ! Last version of bridge, camera raw and macOS Sequoia 15.6.1 Thanks a lot

Estoy intentandor probar  aumento de escala generativa con Topaz en el nuevo Photoshop y me sale un mensaje de que dice "En este momento, el administrador del sistema no permite acceso a esta función. Póngase en contacto con él para obtener más información"Alguien sabe por qué me pasa?

Been using Photoshop since 7.0, before it was CS or years... never had an issue except this whole month, Photoshop just doesn't open. I end task on all photoshop processes, try again, nothing. I get it working by fluke sometimes after a reboot. Tried opening from Cloud app, run as admin, no luck SPECSIntel Core i9-14900HXNVIDIA GeForce RTX 406064GB DDR5 RAM1TB SSDAll latest Adobe/Win11Pro/and video driversDELL SE2419HR 24"

Hi there, I am desperately trying to resize my Canon r5 images to "even" or "clean" numbers (pixels). The original format of the r5 is: 8192 x 5464 px (2x3 format). When I am in the "Image Size" Window typing for example 300 pixel (width), I will get 200 pixel (height), which makes absolutely sense because of the original sensor aspect ratio. BUT: When I type 3000 pixel for the long side (width), I suprisingly get 2001 pixel for the short side. WHY? I asume there is some hidden decimal place going on in the background?!? I remember there was no issue with my old Canon 5D Mark IV (6720 x 4480 px). Is there any workaround? Any help would be greatly appreciated.Thanks and best regards!

I tripped over this now-closed thread:https://community.adobe.com/t5/photoshop-ecosystem-discussions/why-was-sync-settings-removed-in-cc-2015-1/td-p/7876491 I am curious... does anyone still feel there's a requirement for this? A potentially unofficial/official response in the original thread stated that its removal was partly due to Libraries being introduced at the time. However, I don't see how Libraries caters for app Sync Settings, 10 years following that post.

Seems like in the past there was a forum in the Adobe corral where general infor was discussed -- I am looking to configure a new custom pc to replace my old custom pc (my builder died) and am looking for advice --- does this general info forum still exist? Thanks to those who know more than me,Joe

Photoshop bug.Anyone else have this issue?The grid is turned on. Snapping is on. I'm pulling guides to snap to the grid. I pull the vertical guides, starting from the left and moving right. They all snap to the grid.Then I begin pulling the horizontal guides down. I begin from the top. The guides all snap to the grid until!!! I pass the half way point on the document. After that the guides don't snap to the grid. It's annoying and inexplicable. But, since its easy enough to zoom in on the document and pull the guides into place  I've never bought it up before. But its been happening for years. I suppose I always thought it was a graphic card/photoshop mismatch thing or some other minor thing that would be fixed along the way. But it never has been fixed. And its driving me nuts. Anyone know why  this happens?Please don't suggest that I check whether snap is turned on, or suggest that I refresh my Pref's because I have done all of that and I've updated photoshop a gazilli

hi ! I was looking to remove a background using the remove background feature (usually found in the properties tab if I recall?) but the tab is empty, i can still find the feature in the contextual bar tho. I was wondering if it was a bug of if the feature was moved to another place. thank you in advance

Bonjour, J'ai mis à jour hier soir Photoshop 27.0.0, mais Nano Banana ne fonctionne toujours pas 😞 j'ai toujours ce message d'erreur y compris sur Beta. Quelqu'un aurait une explication, voir mieux … la solution SVP, merci   

Hey everyone,I’m using Photoshop (latest version) and I’ve noticed that the font size looks way too small, even when I set it to a large value. The text appears tiny on my canvas compared to what it should be.Has anyone else faced this issue? Could it be related to resolution, DPI, or display scaling settings? Any fix would be appreciated!   

Till yesterday everithing were working fine. Yesterday I try to update all the Adobe product but all of them require Win11 so I update only CR. However after that both PS2025 and PSBeta2025 crash everytime I try to open a Photo (in every way - from LR, using the button "OPEN", dragging and dropping, ...).Envidia driver has just been updated.Please do not suggest to upgrade the PC to win11. I just want it to work like yesterday !-----------------------------Winver: Version 22h2 (Build SO 19045.6456)  Adobe Photoshop Version: 27.0.0 20250928.m.3240 8248fae x64 (beta, PublicBeta)Number of Launches: 116Operating System: Windows 10 64-bitVersion: 10 10.0.19045.6456System architecture: Intel CPU Family:6, Model:14, Stepping:9, AVX2, HyperThreadingPhysical processor count: 4Logical processor count: 8Processor speed: 2808 MHzBuilt-in memory: 32634 MBFree memory: 20919 MBMemory available to Photoshop: 25083 MBMemory used by Photoshop: 70 %Crash Handler: AdobeDCX Version: 9.11.1SAM SDK

 I recently updated to Photoshop 2026. I have been having this issue where jpgs downloaded from social media don't open and give this error.   A similar issue used to happen in Adobe Indesign where photos downloaded from whatsapp gave an error when imported in Indesign. Opening them in MS Paint and saving them again removed the error.In photoshop, I get this error. After clicking on "learn how to fix", I am taken to this page.https://helpx.adobe.com/photoshop/desktop/troubleshoot/file-format-issues/resolve-program-error-while-saving-files.html?trackingid=C12Y2WS7&mv=in-product&mv2=psI have taken all the steps given on the above page. The images open fine in MS Paint. And if I save them in MS paint and open them in photoshop, they open fine.But is there a better way that the jpgs open fine directly in photoshop? Someone reported a similar issue here also in 2020.https://community.adobe.com/t5/photoshop-ecosystem-discussions/my-whatsapp-images-is-not

During busy photography season this filter has gotten some bug.  It will not work at all to move eyes simply.  I have cleared the cache, I'm done the backend file delete that was posted online, restarted, updated.  What gives?? How can I fix this feature? Here's a sample pushing eyes all the way otherside - it displays error (but doesn't specify and doesn't work)

I'm using the Rotate View tool at a specific rotation value to facilitate painting horizontal strokes.Although I can preview what's happening in normal orientation by tearing off the Navigator panel and enlarging it (thanks for that flexibility!), I also need to switch back and forth between orientations frequently, as some areas need to be worked differently.There has long been an easy reset (double-click the tool), and there is also a "Reset View" Button (thanks for that too!).But I am disappointed that I cannot make an action for Rotate View to my chosen angle.And per Jazz-y's answer to this post (reset view via scripting ), I understand that even scripting won't work, without conforming all documents.So I'd really appreciate it if Adobe would consider adding Action support, including the rotation value, to this tool.If not, I could live with Jazz-y's solution, moving all my reference docs to another app so they stay upright--but that script is for resetting to rotation 0. If a

Many tools give predetermine end result. For example when use clipping mask you know what should be the end result. There are many type of Blending Mode but those seem do not give a predetermine end result, it seems only a trial & error can decide which is most appropriate one. Is this way Blending Mode works?   

I have a problem, I have a picture of a landscape and there is a figure on it. After generative, I wanted her to copy hundreds next to her from one character. He just can't!!!

I updated to photoshop 26 now evoto and topaz do not work hep