Questions

When saving a JPG from menu > Save a Copy the file is saving with the date of the original PSD file and not todays date. As far as I can tell this only affects JPG files as the PDF and PSD I saved from the same PSD file have todays date. I have seen this many times before and in several versions of PS. This makes it hard to find files when filtering by date. The JPG was saved from the PSD I saved as a new version today as well, that didn’t change the date that was saved on the JPG.

Hello,I’m looking for recommendations for a PC for running CC apps (specifically Photoshop and Illustrator). I just need recommendations as to what processor and RAM to order.Our printing department desperately needs a new PC but myself and the design team are all Mac based and have no idea about PCs. They need a PC because the RIP software they use is PC only. To give more perspective, they will need to adjust artwork at times but they don’t design as such and they will never be doing any video editing or 3D etc, it will be Photoshop and Illustrator that they will be using the vast majority of the time. Thanks in advance.RegardsDave

Hi there, can update the Photoshop 27.5 Version and make it better like in 2.74 Version also my photoshop keep frozen can you update the 2.75 version Thanks Kevin   

After installing the latest update for Adobe Photoshop, I’m having consistent issues opening CR3 files.When I double-click a CR3 file (which should open in Camera Raw), Photoshop either:Does nothing at all, or Shows an error saying it can’t open the file type, or Starts to open, then completely freezesWhen it freezes, Photoshop becomes unresponsive and cannot be closed normally. I have to force quit it using Activity Monitor.Workaround (temporary):If I open Photoshop first and then go to File → Open, the CR3 file will open correctly. However, this is much slower and disrupts my workflow.Expected behaviour:Double-clicking a CR3 file should reliably open it in Camera Raw without freezing or errors.System Info:Camera: Canon EOS R5 Mark II File type: CR3 (RAW) OS: macOS (add your exact version here) Photoshop version: (Help → About Photoshop) Camera Raw version: (Photoshop → About Plugins → Camera Raw)Additional notes:This issue started immediately after the most recent update. Prior to th

Ever since the update to Photoshop 2026, I can no longer set my default for opening .webp files in Photoshop. When I right click to "Open With" only Photoshop 2025 pops up but when I click that, it doesn't work. I tried remapping through the Default Apps panel, but that doesn't work either. I have tried uninstalling Photoshop, restarting, and re-installing. Still no luck. (I'm on Windows 11).

Using Photoshop 2026 on Mac mini running Mac OS Tahoe 26.4 & I can't do anything... currently trying to use the eraser tool on a mask to refine some edges but I either get the spinning beach ball of death or nothing happens at all. Even just trying to make the selection to create the mask, every time I clicked the mouse it was just a spinning beach ball. I can't get anything done… I’m getting spinning beach balls just trying to close Photoshop.  My Mac mini is fully up to date, I have updated all Creative Cloud apps to most current version, and I restarted my computer… the problem has persisted through all of this.

Howdy.I’ve had this problem for years.  The “Export as” feature can’t be trusted to properly export gradients (see attached). Anyone know what the deal is with this? Thanks! 

Hi all,   I am currently puzzled how to create a pantograph with the word VOID written. I tried to create one and it is attached as PSD file but i am unsuccessful in the matter.   It has to be back and white in color or a combination of magenta.   Any advice or lead in this would be highly appreciated.   Thanks in advance    

Folks, any idea how to install Photoshop CC 2019 (version 20.0)? I updated to version the current version after holding off for a while as I just didn't want to change.  Now that I updated, the new version is gltichy as hell for me and can't work with files from without all kinds of graphical glitches, rendering my photoshop sub useless. The creative cloud App only shows versions as low as Photoshop (22.0). Any assistance would be appreciated.

I wanted to use generative fill on a selection, but PS refused because it said my color image was in grey scale. Flat wrong. Below are screenshots of the image mode and the bad message.And the version info follows those.  

Smart Object from Illustrator appears low resolution at 100% (regression)📝 DescriptionPlacing an Illustrator (.ai) file into Photoshop as a Smart Object results in a rasterized, low-resolution appearance, even when viewed at 100% zoom.This behavior is new and did not occur in previous versions. It is impacting production workflow for print design, where accurate, high-resolution vector rendering is required.🪜 Steps to ReproduceOpen Photoshop Create a new document (300 ppi) Go to File → Place Embedded Select an Adobe Illustrator (.ai) file with vector artwork (fonts outlined) Place the file and confirm placement View the Smart Object at 100% zoomAlso, tried just opening Illustrator vector art and linked graphics which I have done previously over many years without issue and now everything is blurry and low resolution - even vector art. Never had to  import or place files before. ❌ Expected ResultVector artwork placed as a Smart Object should appear sharp and resolution-independent at

I am running Adobe Photoshop Version: 25.5.0 20240214.r.375 c4f33ec arm64 Number of Launches: 73 Operating System: Mac OS 14.3.1 System architecture: Apple M3 Pro, HybridCPU(6:6) After I create a shape from an image in the library using the Capture in-app extension by clicking + then extract from image then going ot the shapes tab and saving the shape to my CC library, it saves this captured shape into my library. My problem is when I export this captured shape to a blank document or any document, I get the following error message: "Error:  Could not place becasue the Postscript data isd empty or invalid". This only happens on shapes that I captured with this extension in Photoshop desktop.  I can import other shapes from my library and they import just fine.  I only have problems with shapes that were created using the capture in-app extension.  I know that this captured shape is not corrupted because when I access my library from Photoshop for iPad,

Photoshop says "This feature is currently not available" and you can't use the generative fill ai function. I need to work right away, what should I do? I'm also subscribing to Firefly for a fee, and I haven't seen this phrase in the past few months. It's a problem because problems related to ai happen so often. -The grammar may be awkward because I'm currently using a translator. Please understand :)--

Hi,My student license for Adobe Substance 3D was approved 4 days ago, but it still hasn’t been applied to my Adobe account. I received the approval email I am logged into the correct account The plan does not appear under "Plans" I already contacted Adobe support, but the issue is still unresolved Could someone check if my license is properly provisioned to my account?Thanks in advance.

【Bug Report】 Image → Trim → Transparent Pixel: Second and subsequent attempts do not work■ Environment・Photoshop version: 27.5 (also observed in 27.4)・OS: macOS (M4 MacBook Pro)■ Summary of the IssueAfter using a layer mask for masking, attempting to trim transparent pixels two or more times results in the second and subsequent attempts not functioning at all.■ Reproduction Steps① Open the photo file② Select the subject with the selection tool③ Trim with the layer mask④ Image → Trim → Transparent Pixel (works normally at this point)⑤ Intentionally create a state where an entire edge row or column becomes transparent by adjusting the layer mask⑥ Run Image → Trim → Transparent Pixel again → nothing happens■ Additional Notes・ Phenomenon confirmed with multiple different image files・No improvement after updating from 27.4 to 27.5・After step ⑤, it is visually confirmed in the Layers panel that transparent rows/columns exist at the edge・Initial causes such as ghost pixels (remaining pixels w

Error: Panel Descubrir no funciona en Photoshop v27.0.  aparece el error "Something went wrong. Discover Panel encountered an error..."  y ya has intentado borrar la configuración UXP sin éxito. 

Ich benötige eine 32 Bit Version für meinen alten Epson Scanner. Selbst bin ich unter Windows 11 unterwegs

I've heard that the ability to register my PS CS5 license in no longer possile on my new Windows 11 system. IS this rtrue? Rather than waste a bunch of time and effort on something that won't work at least I could look for an alternative program that I can use. I don't use CS5 for montary gain and I refuse to get hooked into an expensive software subscription. If i need to learn a new program I'll do so but I will also carry a huge resent for Adobe after having paid for a program that can't be registered. That last part is what I've heard and hoping it isn't reality. I paid for a ligit license directly from Adobe and I expect it to work. Else I've learned a lesson. That applies to my Dreamweaver license. Thanks for any input. as well.

Recently bought a Logitech MX Creative Console and had a few issues with Photoshop integration, now mostly resolved. If you have this and use with Photoshop, could you check two things for me?:In photoshop/plugins/logitech if you have more than one profile for your keypad, is there a listing for each? I could swear there was for me, but not now. You would need Default and Essentials, for example, assigned to your Logitech keypad for photoshop. Right now I have one even though both of those profiles installed and enabled and working.   My current plugin listing If you have Essentials, are there many buttons on pages 2 and 3 with text only and no icons? I did not recall that before my issues and fixes and now many buttons text only. For you?Thanks for the help! 

hi, so i've been trying to make a script that changes the text style based on it's contents (Whether if there's quote text or not) and making it into Bold Italic, regardless of what font I'm using, so I managed to make it change the text to faux italics, but when I try to make it to change the actual font style to the Italics version of the current font, it just doesnt work and I dunno what to do.This is the main idea, get the text on quotes ("" or '') and change the text style of that to bold italic, or italic.I was also trying to make it change the color of the text, so if the text layer is not black and has some color in it, change the quote text style and color to red, but I feel I wanna fix the main issue first.I hope someone can help me out and thanks beforehand.This is my current code// Set Quote text in Bold Italic style#target photoshopfunction getAllTextLayers(parent) {var layers = [];for (var i = 0; i < parent.layers.length; i++) {var layer = parent.layers[i];if (layer.ty

Initially I was very happy when the history of processed images on the home screen would reveal file location “on computer”. This function does not work any more. I have reset tool and tried changing settings in File Handling to “on Computer” however this does not change and hovering mouse over file in home page will not work.The second issue relates to a Floating Image. No matter what I change settings to my open document still freely floats within the photoshop window and I dont want this. Changing the settings does not alter the floating document.Thank youKen Abrahams  

When I open a D300 image in Photoshop it looks OK in ACR and I can make adjustments with out a problem. But when I proceed to Photoshop the image is nothing like what ACR displayed. Colours and contrast are way off with banding and splotches of cyan and magenta in the Skys. This hapens even when I do not make any adjustments in ACR.I usually work in Prophoto but changing to Adobe RGB in both ACR & Photoshop the banding improved but the colours and contrast are still way off. The original images are all RAW files. This happening with all my D300 NEF files. If I first convert to DNG using the Adobe converter, same problems.I decided to go back to some older images that I really like and redo them with updated software. My first digital camera was a D300 and from 2008 to 2012 we traveled with it to various parks etc. RAW images taken with later Nikon cameras process with out a problem (D800 - Z8).I am Using the latest versions of ACR and Photoshop. My PC has 64G of memory and the GPU

I installed the latest version of Photoshop, but when I try to start it, I get the error shown in the photo. I have tried at least five times to completely remove everything from my Windows 11 system and also used your tool to delete the remaining files. After each attempt I restarted the computer, but the problem still persists.Could you please tell me what might be wrong? I urgently need Photoshop.Thank you for your help.