Bug Reports

IssueOn a MacBook Pro M5 running macOS 26.6.2, Premiere Pro 26.5 displays its Home screen after the splash screen, but all application interaction remains unavailable for approximately five seconds. Recent-project links, buttons and menus cannot be used during this interval. The interface becomes interactive around the time the Adobe account avatar appears in the upper-right corner.This happens on every launch into Home. Configuring Premiere to open the last project directly bypasses the issue completely. The five seconds describes the unresponsive interval after Home becomes visible, not total launch time.EnvironmentMacBook Pro, Apple M5. macOS 26.6.2 (25G83), also confirmed in the supplied process sample. Adobe Premiere Pro 26.5, updated September 10, 2026. Exact application build not recorded. ARM64 architecture, confirmed in the process sample. Creative Cloud Desktop installed; exact version not recorded. Clean installation reported; also reproduces in a newly created macOS user ac

Post Body: Hi everyone,I’m dealing with a frustrating change in behavior in Premiere Pro 26.5.1 on Windows.Previously, when I used the "Open Project" dialog, it automatically filtered the window to only show .prproj files, which kept things clean. Now, it defaults to showing absolutely everything in the directory. Has anyone else noticed this regression in the 26.5.1 update? Is this a known bug with how Premiere talks to the Windows file explorer, or is there a new preference somewhere to get the old automatic filtering back?Thanks for any help!  

Voice to text still remains a problem on the new m5 pro chips, I am currently using the M5 pro 16inch macbook pro, and the app just remains to be buggy compared to my m3 macbook. This has been a frustrating experience.

The object selection red mask and text red mask are not showing properly,try this method- go to menu bar -view-select show ruler and  show guids it will disable if it was enabled,then try ,it will work probably

This is actually a HUGE bug because you can’t change your sequence resolution without corrupting your timeline basically     Border inaccuracy when going from 1080p to 4K sequence resolutionTeleportation when trying to change position (towards top left corner)  The borders go inside the video when going from 4K to 1080p (Exact opposite) Weirdly enough, if we switch between sequences the bug fixes on its own and premiere behaves as it should.

I’ve had this issue in the past with Adobe. It will either not transcribe my content or even allow me to create a static transcript. If it does, it is stuck on “creating captions” for hours with no movement on the bar. This has happened to me already with adobe where it took me re-imaging my work laptop to get it to work only for it to stop after a week. This needs to be resolved quickly. I’ve done cache clearing, reset my scratch disks, updated and used older versions of adobe and this is still a problem. No other coworker or users have had this issue. I’ve spoken to community managers and sent them files and it’s had no problems. So this has to be a bug issue.  

First of all, Apologies I recently made a post about this before but i thought it was rushed and i feel i can explain this issue at a lot more detail. As there is multiple issues i shall split this post into several sections (Please Check Last Section For Technical Specifications And Other Notes On My Tests)   Premiere Pro 2024 has Some Severe UI Issues. (Beta Included)READ THIS :THIS IS A MASTER THREAD FOR THIS ISSUE. WHERE I WILL BE POSTING EVERY SINGLE FINDING I POSSIBLY CAN. IF YOU SEE THIS POST AND ARE SUFFERING FROM THIS ISSUE PLEASE HIT UPVOTE. AND COMMENT YOUR PC SPECS AND SPECIFICS ON YOUR EXPERIENCES. EVEN IF YOU HAVE NOTHING TO ADD JUST A COMMENT SAYING THAT YOU ARE EXPERIENCING THIS BUG IS ENOUGH TO PUSH MORE TOWARDS A FIX. IF YOU FIND ANYONE EXPERIENCING THIS BUG ALSO IN ANOTHER FORM PLEASE REDIRECT THEM HERE SO THEY CAN COMMENT AND WE CAN HAVE ONE SPACE FOR THIS ISSUE AND EVERYONE EXPEIRIENCING IT. REGULAR UPDATES ON MY FINDINGS ON THIS

I'm facing a playback glitch only at the first few frames of the playhead. It starts glitching at the start and then playbacks normally. And it happens everytime I plays the timeline. I'm using a laptop with Ryzen 7 5800H 16GB Ram with RTX 3050 gpu. I tried every solutions in the internet for playback related issue. I even tried reseting the whole laptop and did a fresh install, still the problem remains. What should I do?

I was frustrated with Premiere Pro jumping around my sequence and realized last week why it was happening. If you search the transcript for a word in a clip, that search will persist when you switch to looking at your sequence if you keep the text panel open. Once at the sequence, the playhead will jump to the incidence of that word, and will continue doing so until you clear your text search or close the text window, even as you are editing, trimming clips, etc. Expected behavior for me would be that the search persists only in the clip I was originally searching. That should mostly solve the problem, though people will still need to clear their search string from the text panel if they are searching within their sequence, or else it will create chaos during editing. Premiere Pro 23.6.0 Build 65Mac Studio M2 Max  

Since update 24.0 I had a problem with the image freezing in my program monitor and then unable to read the timeline. it was a permanent bug every 2 minutes. To resolve this problem I deactivated the video thumbnails in the timeline and it works perfectly again. I'm sharing the info if it helps anyone with the same problem. Enjoy 😉

R3D files do not show thumbnails when viewed in Media Browser. Video appears when hovering over a clip and scrubbing, but when the mouse is not hovering over the clip the thumbnails disappear. Identical issue to this post from May 2023. All R3D files behave this way regardless of camera source, resolution, size etc. This behavior has been observed on Premiere Pro 23.2.0, 23.6.0, and 24.0.0Mac OS Ventura 13.5.2Apple M1 Ultra128 GB RAMNAS Storage 

Dear Community,I work with Permiere Pro 2024 on a MacBook Pro 2021 with an M1 Max Chip and 64 GB RAM.For a few days now Premiere wont stop generating peak files over and over again in old and new projects. It generates peak files for the same video files over and over again and therefore renders itself useless since it completely slows itself down doing this.In the Folder where the files are stored I now see up to 12 .pek-Files (as shown on the screenshot) and the number is still increasing. Did anyone have the same problem or is this the final sign to jump ship and start using Davici 😄

audio do audio essencial recorrentemente não consegue ser adicionado. nao aguento mais esse problema. inadmissivel, absurdo!!

In Premiere Pro 26.0.0, several dropdown-menus are occassionally empty. Here’s a recording of the Project manager:The Dropdown-menu only populates when pressing Ctrl+Shift+Win+B to reset the Graphics driver. The populated menu only lasts for one click, then it is empty again. Empty dropdowns are found all across Premiere, Effects Panel, Options, everywhere. -------------------------------------------------------------------Windows 11 25H2, Build 26200.7462Nividia RTX 4090, Studio Driver 591.74Single 4K MonitorAMD Threadripper 3970X, 128 GB RAMPremiere Pro 26.0.0

IssueWhen using New Sequence from Clip with multiple audio files, Premiere appears to introduce one-frame source discontinuities at some edit points. These discontinuities prevent Premiere from recognizing the edits as through edits and therefore prevents Join Through Edits from working.The same media and workflow do not exhibit the issue when the initial sequence is created manually.Steps to Reproduce Select multiple source audio files in the Project panel. Choose New Sequence from Clip. Organize/edit the audio files within the newly created sequence to be stacked vertically. Copy the organized audio files into another sequence. Place a cut point through all the files, attempt to use Join Through Edits Some edits cannot be joined. Inspect the source timecode on either side of an affected edit. Observed BehaviorOn affected edits, there is a one-frame discontinuity between the two clips.Example: First clip out: 00:00:53:03 Next clip in: 00:00:53:05 Missing source frame:

I have strange bug. I work with PROJECT in PRODUCTION. For example, I have sequence named TEST.Then I try to render it. Premiere shows export dialog and filename is TEST_1.mp4: I try to rename file to TEST.mp4 (i DON'T HAVE such file in DESKTOP). And as soon as i do this, i receive error: When i change destination - it's all ok. I don't know, why it is so. If i have such file in desktop, it just asks me to rewrite, and then it's all ok. 

IssueAfter updating to Premiere Pro 26.3.0 (Build 93), the Proxy → Reconnect Full Resolution Media command hangs indefinitely on "Locating media...".The exact same project reconnects correctly in Premiere Pro 26.2.2.EnvironmentPremiere Pro 26.3.0 (Build 93) macOS Mac Studio UGREEN NAS SMB over dedicated 10 GbE Proxies created using Premiere Pro + Adobe Media Encoder (Create Proxies)Steps to ReproduceCreate proxies using Premiere Pro and Adobe Media Encoder. Open a project with attached proxies. Make the original media unavailable. Choose Proxy → Reconnect Full Resolution Media. Browse to the folder containing the original media.Expected ResultPremiere should reconnect all original media within a few seconds while preserving the attached proxies.Actual ResultPremiere displays "Locating media..." indefinitely and never completes the reconnect.The application does not crash, but reconnect never finishes.ComparisonThe identical project, media, NAS, and proxy files reconnect immediately in

Never had issues with playing back drone footage within Premiere but now (since 26.3) I have hit a major but.  The HEVC 4.2.0 10bit is stumping playback. Only way around is proxy or render the clip. I moved over to Resolve and no problems.  

There is an issue with how Premiere Pro handles scratch disk settings when working across both Productions and standalone project workflows. When a standalone project is open, and its scratch disk is set to “Same as Project,” it behaves correctly and autosaves into that project’s own folder. However, if I later open an entirely separate Production that the original project does not belong to at the same time,  Premiere automatically switches the global scratch disk setting to “Same as Production.” This immediately hijacks the autosave destination for every currently open project, including projects that are not part of that Production. All autosaves for unrelated projects get redirected into the active Production’s folder, breaking project organization and making version tracking unpredictable. Why This Is a ProblemI work on several client projects at the same time. Some are organized inside Productions and others are traditional standalone projects. Each project needs i

i use a custom workspace, and when i export a project to AME, it will close the second screen windows, i need to reset to saved layout every export. wouldnt be as bad if i didnt change my custom space while editing, bins and whatnot get reset..is this a bug or a feature? i mean after i hit send to AME, its like it wont go back to my custom workspace that uses 2 screens, it will go back to it using only the main screen panels. It will close my program monitor and all other panels on that screen. normal before export: export window: after sending to AME it will stay in this configuration without the top panels:   AMD Ryzen 7 4800H with Radeon Graphics 2.90 GHz, RTX 206032.0 GBwindows 11premiere 23.6.0 build 65

I change a setting (sliding, typing, it doesn’t seem to matter) on Lumetri Color, and then it occasionally (seemingly inconsistently) just undoes the action when I move the playhead. It doesn’t seen to matter what the setting is, the format of the clip, or how I change the setting. Sometimes it will be just the last setting, sometimes it will “undo” to when I first selected the clip to make the changes.I have been back over clips I have previously changed, after changing more clips, only to find the settings have reverted to an earlier point. Very frustrating![Moved to Adobe Premiere by a moderator］

After creating Object Mask 01, Premiere Pro does not highlight or enable the options needed to create a second object mask. While Object Mask 02 is technically created, no overlay appears. To restore the subject highlighting, I have to save the project, close Premiere Pro, and then restart both the application and the project.

If you select a clip / multiple and merge them into a nested clip in your timeline, the selection of the audio clip stays active. Since they aren't merged and replaced by the synced sequence audio track like what happens if you just have one audio track. This is just a minor visual "glitch", but annoying nonetheless. The selection fixes itself when you select the clip and deselect it again but doesn't if you select another audio clip in the same audio track.This was introduced with the timeline rework and worked as expected pre Premiere 25. This happens in both latest Premiere Pro (25.5.0 Build 13 in my case - I don't get 25.6.1 yet) and Beta.  I attached a video which shows what happens.Basically it is:Select a clip with at least 2 audio clipsNest themThe audio sources are still selected, when they should be deselected in the timeline 

... does not work.When i change a clip's timecode to any time (1:30:00  for instance) it always shows up as Media Start 00:00:00:00 in the bin. Not even closing and reopening the program helps, i have to "replace clip" with itself or delete and re-import into the project anew.Same machine with PPro 2022: Everything (sorry: this ...) works.(Tested on three different machines)