Bug Reports

I'm just trying out Premiere 25 and despite all the bad choices in it over v24, I am generally liking the slightly speedier timeline. However, the one huge oversight is when I grab all the clips right of my cursor to move around, it's so damn laggy and slow. Please fix this.(mod edit: P thread)

Hi,I'm using Premiere Pro 25.2.3 on a Mac Studio M1 Ultra (128 GB RAM) with Mac OS Sequoia 15.4.1.  I use a QNAP NAS (3088XU-RP) wired over 25 GbE SFP28 cabling.  My read/write speeds exceed 2000 MB/Sec over SMB. I began a new project recently (as a Premiere Production) with approximately 100 hours of footage, all processed to proxies as ProRes Proxy codec within Premiere.  There are approximately 900 clips in the project that contains our media within the Production.  When accessed over SMB, Premiere Pro takes upwards of 10+ minutes to fully load the project.  Specifically on the background task of "relinking" every time the project is opened.  Once everything is finally loaded the performance is fine. But when I move all that media to an external SSD (APFS formatted) or even an iSCSI volume from the same NAS (effectively just a block level APFS volume over the network), Premiere Pro loads this project and completes the background "relinking" ta

Estoy trabajando en una secuencia sencilla pero una de las tomas tuve que aplicarle Warp Stabilizer y Time Reverse. Como ambas cosas no son posibles al mismo tiempo debo hacer un Nest de la toma, aplicarle a esa toma el Warp Stabilizer y luego volver al timeline original, usar el Nest para asi poder aplicarle el Time Reverse. Todo funciona bien, pero al cerrar el proyecto y volver a abrirlo a veces, y solo a veces, el punto de IN de este Nest se pierde, y por tanto se ve algo vacio por que esta apuntando a otra parte del tiempo en el Nest, asi que debo reconectar el Nest con Shift+Alt y soluciorlo manualmente pero debo cruzar los dedos para que no vuelva a pasar. Esto pasa con la última versión de premiere en mac.

Greetings. I'm having an issue where text justification of a paragraph is changing when I add a mogrt to my timeline. Examples below. From After Effects, this is a simple, placeholder disclaimer mogrt. I created this block using box text and the paragraph justification set to "Last Left".  This is the preview from the Graphics Templates tab of the exported mogrt in PP, showing that the justification is still appearing to be "Last Left". Upon dragging the mogrt to a timeline in PP to edit the text, the paragraph justification automatically changes to "Justify All", creating these big ugly gaps between the words on the last line of each paragraph. I have not included any settings to alter or make this sort of change within Premiere, but no matter what I try, the paragraphs keep defaulting to this style. Can anyone help me solve this issue?

When I open Premier Pro v25.5.0 it does not respond. I just get a rotating circle and have to force quit. I am using a Macbook pro 16GB running Sonoma 14.5. I have cleared out the cache and reset preferences. But it is still crashing. Can anyone help? many thanks Hayley

PPro has created an edit window with two LOCKED frames displayed, and no way to get back to the sequence. I was trimming 4 frames from the audio track and the whole system just froze and is displaying two frozen framed in the edit display window.  TRying to close out project and nothing is responding. ERROR MESSAGE: Adobe Premiere Pro 2025 is NOT responding.  The latest version seems to be very buggy with multiple issues.  % minutes and the system has not recovered.  Still in Adobe Recovery mode.  Running Windows 11 with GeForce GTX 1660 

Hi Community, I got a project problem for the last 3 Days. The project crashes / freezes the Premiere Pro env. after 2 min. the player is freezed the export dont work. I tried it on multiple maschines. Non worked.I got some linked clips from AE, but I rendered them in and out.I tried many tips,clear cachechange the workspacerest appreinstall and install older versionI tried it on a Mac Mini M4 Pro 64GB.Project is 1920x1080x24f and not long max 2 Minutes.Other projects work I dont know why.Thanks for reading!

I thought this was an early stage bug, but it's been present since launch. Inside the Create Captions dialog, selecting "0 frames" leaves gaps between caption segments. Has been a bug since Captions was introduced. Bug occurs with all frame rates (23.976, 24, 25, , 29,97, etc.).  There is no built in way to eliminate gaps in Captions, aside from manually dragging each clip edge. Solutions below: 1. Selecting "0 frames" should result in 0 frames of gaps2. Add Sequence > Captions > Close Gaps dialogAuto-extends each caption segment to hit the next caption segmentIf last caption segment, do not extend3. Add Timing dialog inside Text > Captions panelStopwatch symbol next to the pencilModeled after Aegisub Timing Post-ProcessorOptions for: Lead-in/lead-out, make adjacent captions continuous

Issue – After importing sequences from Premiere project "B" into existing Premiere project "A", the project save path (autosave, capture files, etc.) of Premiere project "A" is redirected to Premiere project "B" Steps to reproduce 2 Premiere projects are created in different subfolders. Project "A" is located in the Project A folder Project "B" is located in the Project B folder Opening Premiere Project "A" In addition, Premiere Project "B" opens. A sequence in Premiere Project "B" is copied. Premiere Project "B" will be closed In Premiere Project "A", the sequence copied from Project "B" is pasted from memory. The sequence pasted from project "B" to project "A" opens in the timeline in project "A" In the sequence in Project A, a short voiceover is recorded Expected result The VoiceOver file is saved in the project "A" /Adobe Premiere Pro Captured and Generated/VoiceOver.wav   Actual result The VoiceOver file is saved in project "B" /Adobe Premiere Pro Captured and Gen

Issue – starting from premiere 25.1 changes to recordered multicam provoces serious lagsSteps to reproduce – Record multicam, using shortcut keys move to any of edits, using shortcut keys switch previously recorded angle.Expected result – Immidiate change of angle in preview multicam windowActual result – Several seconds of premiere thinking and only then angle changesAdobe Premiere Pro version – 25.5Operating system – Windows 11 Pro 24H2GPU driver version (Windows only) – 581.29Video format - UHD with 720p proxiesVideo attached shows about a second long lag. I'm sorry I have to blur the video, but you can see the moment when I switch camera in the history panel and then when yellow square changes its position. I also attach screenshot of your internal utility with frame prefetch latency when this lag happens. Second similar problem happens when you press keyboard shortcut to extend the edit and it waits several seco

I’m experiencing an error in Premiere Pro that I can’t seem to resolve, despite trying all the recommended solutions I found on Google and YouTube. I believe it might be related to the new Premiere Pro 2025 update. The issue occurs when I try to create a project from the Project Manager to share with my team. I even tried rolling back to the 2024 version, but the same error persists. I also tested this project on a different device, but the error still comes up.   I've attached screenshots below from both versions.     P.S. I’ve already tried clearing the media cache, but the error keeps appearing.

I keep getting the above error code in my team project and can't for the lfie of me figure it out. Any suggestions would be greatly appreciated.   Specs: PrPro version: 23.0Processor Intel(R) Xeon(R) CPU E5-2650L v3 @ 1.80GHz 1.80 GHz (2 processors)Installed RAM 224 GB (224 GB usable)System type 64-bit operating system, x64-based processor

Premiere has been freezing/crashing when I import .xml caption files to edit. I'm using 25.5, using an external SSD, and I'm on a MacBook Pro. There isn't one specific file - I've tried multiple .xml files in multiple projects and it freezes and crashes nearly everytime. 

Just thought I'd mention it again because it blows my mind that something would work so well and then just stop. Was it removed? It used to be fantastic for smoothing out time remapping where there is a small ramp say 400-100.  or very long ramps.    

Hello Adobe Community & Support,I’ve been facing a persistent issue with Adobe Premiere Pro for the past 4 weeks.I’m unable to export any videos — every time I try, an error message appears related to installed codecs or export settings.I’ve searched extensively online and tried multiple troubleshooting steps, but nothing has resolved the problem.Interestingly, both Photoshop and Illustrator run perfectly fine on my system — this issue occurs only in Premiere Pro exports.I’ve attached screenshots showing:The exact error message from Premiere ProMy system specificationsMy graphics driver versionSteps to ReproduceOpen Adobe Premiere ProLoad any video projectAttempt to export (any format, any preset)Receive an error message about missing codecs or export failureExpected ResultVideo should export smoothly as usual.Actual ResultExport fails every time with codec-related or configuration error messages.System InformationOS: Windows 10 Home (Version 10.0.19045 Build 19045)Processor: Intel

Hey guys,As of now i am going insane. About three weeks ago i rendered Videos super fast, but from today on this seemed to have changed and i dont know why.I used to render with the GPU-Accelerator CUDA but now i am forced to render with OpenCL. Every time i try switching from OpenCL to CUDA my preview screen turns black and i cant edit. Even if i try to render with CUDA after cutting with OpenCL the following Error Message occurs: I tried everything, from installing Nvidia CUDA, to switching graphic card driver from game ready to studio, turning stuff on and off again. nothing seems to work. My render time stays super slow. Media Encoder doesnt change that either. And i didnt change my workflow or any other settings. I dont use any third party plugin, i dont use fancy edits. I use my timeline and projects as i did before. It just randomly made my render times super slow and i dont understand, why i cant change the GPU-Accelerator to CUDA, since i have an Nvidida Graphics card.My

Premiere is open, I click the icon in the Dock or CMD-TAB to it, and it doesn't become active. Premiere stays in front while the menu bar reflects that Finder is active. This doesn't happen when I use third party file viewers like Pathfinder. MacOS 13.6.9

Bugrapport voor Adobe Premiere Pro 2025Titel:🔹 "Right-click context menu truncated in floating Timeline panel — options like 'Show Clip Keyframes' are missing"Beschrijving:In Premiere Pro 2025, when the Timeline panel is undocked (floating), right-clicking on a clip displays a truncated context menu. The bottom items — such as “Show Clip Keyframes” — are not shown, and:There is no scroll barThe menu doesn't respond to mouse wheel or arrow keysUsers assume the function is missingHowever, when the panel is docked back into the workspace, the full menu is shown, and missing options reappear — proving it’s a display/positioning issue rather than an actual feature gap.Steps to reproduce:Undock the Timeline panel (float it)Right-click on a video clip in the timelineTry to scroll or access “Show Clip Keyframes”Observe the missing bottom portion of the menuExpected result:The full menu should always be visible, either via dynamic resizing or a scrollable dropdown — even in floating pan

Hi, I am a university educator teaching Premiere Pro for my class and while preparing the material, I encountered this issue.Issue – After trying out generative extend a couple of times, now whenever I try to use this tool, it will just be stuck at 'Preparing 1%' for video. Audio will generate but not video.Steps to reproduce – Click on Generative Extend, then drag either the beginning or end of a clip.Expected result – There should be an extension of the clip generated.Actual result – The clip will be stuck at 'Preparing 1%' no matter how long time pass.Adobe Premiere Pro version – 25.3Operating system – Windows 11 HomeGPU driver version (Windows only) – GeForce RTX 4070 TiComparative information helps us understand more about when the issue occurs: It is affecting new and old projects and both 25.3 version and the Beta versionI have tried uninstalling and reinstalling Premiere Pro and restarting to no availI am on the '

When I use Render and Replace to reduce the load of heavy effects on my clips in the timeline, I encounter some issues. The transcoding completes without any error messages, but the resulting rendered clip is no longer frame-accurate. The clip "block" remains in the same position, but the footage itself is shifted, sometimes by multiple frames.This occurs when I select "Sequence" as the source. Enabling "Include Handles" doesn't make any difference. When I choose "Individual Clips" as the source, the option to render clips with video effects is greyed out.To be fair, some of my clips are interpreted footage (59.97 fps interpreted as 29.97 fps), but I can't redo my entire timeline edit for that. Nesting is not a solution either, since you can't render and replace a nested clip that has effects applied.My current workaround is to render the entire timeline to a high-quality codec, and then use Scene Edit Detection to automatically slice up the video, but this process is very time-consumi

How do I lock comments from Frame.IO to a sequence, so that they don’t revert to the previously saved version of a sequence on Frame.IO?Frame.IO V4 is overwriting & deleting comments markers on my sequences in Premiere Pro, and I need it to stop making my comments markers revert to the previously saved version on Frame.IOAfter I've imported marker comments about a sequence from Frame.IO, if I open a duplicate of that sequence again while having the Frame.IO comments window open, the comments in my timeline will revert to match the previous version of the edit on Frame.IO that had been uploaded to Frame.IO and had comments added., instead of moving the markers with the current edited version, this is after I've started working with a new version of the sequence. In previous (v3 legacy) version of Frame.IO, once I’d imported markers, they were in the sequence in Premiere pro and would adjust to the edit as normal (ie - I could edit them, and they would move with my edit); but no

It is impossible to copy and paste effects from one clip to another by using keyboard. Windows 11, Premiere Pro 25.5.0.

I'm having frequent CPU spikes (300% and higher) and crashes in v25.4.1 and have tried every troubleshooting method I know, with no success. Showing high CPU usage (132%) even when idle. Giant spikes are happening with single layer of HD H264 footage with no effects. None of this media or sequences ever gave me issues before and there is nothing new to explain what is triggering this. I've tried dumping cache files and prefs, disabling plug-ins and updating Premiere (I'm avoiding 25.5 at this point for various reasons).  System drive and media drive both have penty of free space and not reporting any issues.I'm working in a Production project so things are well distributed. I tried starting a new project with minimal media and was still seeing large CPU spikes.No funky iphone (or other) media and I'm crashing even when playing audio only (mono WAV) or single layer HD H264video. When I switch to another app like chrome, I'll come back to a beachball, but it also happ

Eu paguei o adobe premier pro pelo cartão, e consta que eu paguei porque saiu dinheiro da minha conta e fala exatamenteo que era a adobe que havia tirado o dinheiro da minha conta, mas mesmo assim continua constando no site da adobe que eu n paguei. Alguém me ajuda por favor 

When editing in Premiere Pro, I noticed that the audio is slightly off when playing back on the timeline. This issue is causing me to edit something with exact precision, only to export it and realize that it is off. I have wasted multiple days trying everything I can to fix it, and this is my last attempt before unsubscribing and reverting to Davinci Resolve, where I did not experience this problem.