InDesign

The bottom area is blank space; placing a small section of the layout there wouldn't be too chaotic. 

I am often working on documents with multiple review sessions. The problem that occurs since the latest updates of InDesign is that as soon as I put the cursor in a piece of text which previously had a comment attached to it which is resolved, all resolved comments pop up in the comments panel and I cannot see the current comments: all comments are immediately filtered to 'resolved'. Of course I can switch off the filter for resolved comments again, but it switches back again to 'resolved comments' as soon as I start working on the text. This is driving me nuts, because it is not only annoying, it becomes very difficult to work on the unresolved comments and takes up a lot of time. As a work around I now have to open the online document with the current unresolved comments to track down what actually still needs to be resolved. Please help!Update 2025-05-13This is still unresolved, so to anyone upvoting my comments on this issue: thank you!To you, and anyone new reading these posts loo

I am currently facing a compatibility issue with Adobe InDesign 2023 on my device.In order to resolve the problem, I kindly request a direct download link for the official Adobe InDesign 2023 installer, or guidance on how to properly obtain it through my Adobe account.  

Hi everyone,I'm thinking about laying out a book with InDesign, but I wanted to know from you experts if it's possible to do what I need:The text is a combination of four different texts; to indicate which text it is, I'd need to underline it with four different colors; sometimes just one line, sometimes two, sometimes three, etc.Is it possible?

Hi community,I am working with documents in a book. I compose each chapter in Word and import .DOCX to my .INDD using STYLE MAPPING. All my styles in use are accounted for.I would like to have a blank TEXT FRAME for my chapter heading on the first page of a document. I would like to place the "LINKED FILE" into that TEXT FRAME and LINK TEXT FRAMES for the following chapter text to roll into.When I perform the described steps, all is well. However, when I alter and save the .DOCX file, all my Indesign STYLES are overridden and can't be fixed with CLEAR OVERRIDES because it is greyed out.I have to RELINK the .DOCX to CLEAR OVERRIDES. DOG GONIT! Now the problem isn't happening anymore. Heck with it. I'll continue the post, in case anyone can shed light. Screenshots below

Hi everyone,I’m working in InDesign (latest version, 2025) and I’ve noticed something strange about alignment and guides.When I draw a rectangle with a thick stroke and try to align it to a guide or the page center, InDesign aligns it based on the outer edge of the stroke, not the object’s true center.In Illustrator, alignment ignores stroke thickness (which is what I want). But in InDesign, it always includes the stroke, which shifts the object slightly.I remember there used to be an option called “Use Preview Bounds” that controlled this behavior, but I can’t find it anywhere in the current version — not in Preferences, not in the Align panel.My question:👉 Is there still a way in InDesign 2025 to align objects based on their geometric center (ignoring stroke thickness)?If this feature was removed, is there any new equivalent setting or workaround?Thanks in advance for any help or insight!

I have a number of sources where I'm pulling information and do not want to do the tedious File>Place then edit down.The copy-paste seems only reserved for regular text frames or overriding the parent; I don't want this option since updates to the parent won't carry through.  Is there another option I'm missing?  

I subscribed to Pantone Connect since I have become accustomed to using those color from Adobe furnished palletes.  So far I have found Pantone Connect to be about as useful and functional as a concete back door or teats on a boar hog. Has anyone had any succcess using the app?Thanks to those who know more than me,Joe

Bonjour, Cela fait plusieurs fois que j'essaie de démarrer le logiciel Indesign sur mon mac, seulement j'ai toujours le même message d'erreur qui s'affiche (voir capture jointe). J'ai déjà consulté le "plus d'infos" suggéré, et ait suivi la procédure conseillée mais rien ne change, même si je change toutes les autorisations de lecture.Je ne comprends pas pourquoi cela ne fonctionne pas.J'ai déjà essayé également de désinstaller et de réinstaller le logiciel...Si quelqu'un a une solution je suis preneuse s'il vous plait. Merci d'avance

I followed the instructions here: what grep setting will let me not have a hyphanated word at the end of a paragraph in a paragraph style in indesign   And it's not working. If I take the Character Style and apply it to the whole word, it's blocking the hyphen and moving the whole word to the last line (orphan) of the paragraph. I was assuming that the "\w+$" command would do that. But it's not. As the instructions (above) state, "This forces the entire last word to stay on one line, preventing it from being hyphenated. " What I'm thinking is that this is preventing the last word from hyphenating and is trying to keep it on the original line. There is no room for the entire word on that line, and it has to drop to the next line — which it's not letting happen.   At least that's how it seems. Am I right? If so, how can I get this to move the last word to the next line (and be an orphan)? [I cannot rewrite the text to make room for this orphan; I have to accept that.

Have somebody seen this kind of problem. One of magazines spread turned suddenly to grey and I can't apply master page attributes what i can do to fix this?

Hi, I am working on a document and whenever I create a new rectangle or ellipse the object shows as transparent even though the opacity is set to 100%. There are no transparencies applied under the FX section either - I cannot seem to find a solution to this issue!

I want to get the width of the parent(textFrame) of the current table.If the text box has only one column, the width is the entire text box width.If the text box has multiple columns, I want to get the width of one column. Suppose I have now selected the table and want to obtain myWidth. 

Hallo, seit gestern kann die Schrift Rockwell Std Bold Condensed nicht mehr installiert werden. In InDesign wird kein Fehler angezeigt – beim PDF-Schreiben erscheinen teilweise nur Kästchen.

Sometimes my image isn't inserted into the text box; instead, it sits above textFrameWhen I am only selecting the image, I want to retrieve the width of the text box. If the text box isn't split into columns, retrieve the full width of the text box. If it is split into columns, retrieve the width of one column.(or sometimes it may appear below the text)Thank you.

It's a few years since the last comments on this... do I really need to build my own bullets/sub-bullets/sub-sub-bullets/etc. heirarchy?  Is this another simple, basic thing that this tool lacks and I need to recreate or find a source to import from?  

Hello everyone! i'm planing to move several files from a server to OneDrive. This involves an structure where differents files are linked in InDesign documents. Is there a way to automatically change the path for all files to the new location at once? The case:InDesign link to current link from image on server:/Volumes/marketing/MarCom/Documents/Graphic/project1/picture1.pngNewInDesign link to the image in OneDrive:/Users/user/Library/CloudStorage/OneDrive/Documents/Graphic/project1/picture1.pngWhat changes by moving the folders is the beginning of the path. Documents/Graphic/project1/picture1.png remains unchanged. I really apreciate you advice! Kind Regards,Victoria 

My TOC is two pages long. When I update it, the second page disappears, I get overset text, and I have to add a page at the end and place the overset text. This happens every time.I'm using a book file. Windows 11InDesign 20.5 x64

Hi, there are many other topics on this subject before and I found a temporary fix. The issue:When working on two or INND project, whiching from one project tab to the other sometimes causes INND to free and/or lag for many seconds before switching, sometimes minutes before finally making the switch to the next project tab.  The Fix:From my experience and messing around with this, I noticed that this is caused when one of the projects you are working on has missing fonts. It looks like INND is doing some work in the background when there are missing fonts which is causing it to lag when switching tabs. When there are no font-related errors, there is no lag when switching tabs.  I'll look into submitting this as a bug report too! Thanks

Le new QuickLook plugin for InDesing 2025 was working well until now on my configuration (see below).After I installed InDesing 2024 for tests purpose, it's not even listed in System settings.Is there something I can do to re-activate it?----macOS 15.7.1 (24G231) French localizationInDesign 20.5.0.48 (20500)MacStudio M4 36 Go Ram

I've selected multiple rows and columns, but I want to get the first cell in each column. Can this be achieved with a script? The selection area is not fixed; it may span two rows or three columns.It is possible that only one cell was selected. The selection area is not fixed; it could span 2 rows or 3 columns.It's possible that only a single cell was dragged to select.Like this:columns[i].cells[0]

Basically I need to increase every digit in bold underline(bold underline for emphasis, not in original document) in the text below (just an example of much larger document) by 1 and I'm hoping there's some GREP or plug-in way to do it. If anyone has any ideas outside of indesign, I'm open to them too (word or excel etc!). Thanks in advance!  <navMap>    <navPoint id="d3-d333afd81907b-d1e86" playOrder="1">      <navLabel>        <text>Title Page</text>      </navLabel>      <content src="OEBPS/9780008216528_epub_tp.xhtml"/>    </navPoint>    <navPoint id="d3-d333afd81907b-d1e107" playOrder="2">      <navLabel>        <text>Copyright</text>      </navLabel>      <content src="OEBPS/9780008216528_epub_cop.xhtml"/>    </navPoi

Hi,I'm not a programmer and I have a basic question about two options, which is the best option?:- Doing a task in every pagefor (loop pages) { doTask (); } function doTask () { //do something }- Or, in every page doing the taskdoTask(); function doTask () { for (loop pages) { //do something } } there is no difference, it depends the task... Thanks P.D.:It's a hugh ammount of pages, the task... add two text frames

InDesign no longer opens any pdf file. I tried plenty of times with various different files (even those that worked just fine a week ago) and nothing. It looks like some update completely messed up this function. I tried changing Acrobat's Enhanced Security and save file again I tried to re-export pdf again - nothing works. Other Adobe programms works just fine, it's just InDesign that suddenly lost its ability to open pdf

I'm trying to find periods with zero or more whitespace characters after them. Everything I can find says this should work, but it doesn't work for strings that have no whitespace (looking for a capital letter followed by a period): var capitalExpression = "^[A-Z]\\.\\s*"; This findsA. Start the engine. but notA.Start the engine.