Questions

The 3D Origin is useful, but it makes it nearly impossible to rotate a camera or light around its point of interest.Right now, the only workaround is to open the Viewport Options, disable the Origin, do the rotation, and then enable it again. That workflow is slow and frustrating.What we need:a) A dedicated Origin on/off toggle directly in the toolbar (with a keyboard shortcut) when the 3D Origin is enabled.orb) An updated 3D Origin design that includes a center handle (Point), allowing us to rotate directly around the point of interest without disabling the Origin. 

Dear communityI’ve created a pretty decent animation (for a non-pro newb boob) as a gift for an artist friend who - amongst much more - welds animals out of 10mm rubar construction steel (Junikat by Jonas Kaufmann). And, yes, most expressions with aid of ChatGPT; they seem pretty neat though and I left descriptions. Animation on YouTube SHORT (9:16)Anyone willing to help outcleaning up simplifying (enancing, e.g. adding controls for offset, overshoot, speed, colors etc.)?We could then also upload it to a stock site and share profits.Many greetings from Switzerland,Sandro

I am working in AE 25.1.0 on PC. I have a scene set up in Advanced 3D, using a mix of .obj and .glb files, alongside regular 2D and 2.5D layers. My camera starts wide before zooming in close. My issue is that when the camera gets very close to these layers, they start to clip against the camera. I have not had this issue with Classic 3D but can’t use that renderer if I want to get the most out of the 3D elements. I have tried adjusting my camera and 3D render options with no success. Any tips?

I have a fairly complex and large scene. I accept it’s going to be slow, especially with my system specs. I have been working on it in quarter res and it can easily preview render that.But what I can’t get over is the render time!A full quality preview takes 15-25 seconds to render a single frame. This is somewhere I would expect the final render to be. It doesn’t matter where I put the play head on the timeline it’s always between those times to preview a frame.When I start rendering, it seems to be around this time, but then it starts getting really slow.I have switched from ProRes to a PNG sequence to try and figure how long this is actually taking and where it’s slowing down and the results are...interesting.At a point during the animation it goes from slowly getting longer per frame (each frame is taking up to a minute or so) to suddenly getting really long per frame, each frame is then taking around 15 minutes longer than the previous, and now I am up to over 2 hours per frame. T

I have a really strange issue, where my audio is fine outside of After Effects, but breaks once it has been imported.  By "breaks up"I mean that some words in a sentence are completely omitted, however the audio plays at the correct speed.  This results in the audio ending way sooner than the video, and the video not being in sync with the audio.  It was fine yesterday, so I thought that it might have just been a problem while saving, so i tried it in Premiere.  Same problem.  It's not just a preview issue either.  After exporting from Media Encoder, the audio remains broken.  I can't even completely restart the project, as every time I import a video, the audio in the video breaks up.  A quick response would be much appreciated, as I would like to complete this project as soon as possible.EDIT: It's also only with specific clips.  Some clips are completely untouched, while others are unusable.

Trying to use Auto Trace to reveal a logo, but the bottom part of the logo shows up before the rest of it . Not sure how to fix that. Any suggestions would be helpful. I’ve added a screen cap for context.

Hi everyone,I’m hoping someone can help me out. This is a bit tricky to explain, so I’ve attached the After Effects file.I’m working on a Lower Third MOGRT in After Effects, and it’s almost finished. The only problem I’m stuck with is the anchor point behavior when changing the width of a shape.I have a shape behind the name that can be extended (x-scale) to the right using a slider in the Essential Graphics panel. Since it’s a bezier shape, I created null controllers for the path points. To scale the shape, I linked the position of these path-point nulls to a slider control. I had to do it this way because all corners except one are rounded, and I wanted to keep the amount of roundness when scaling.The anchor point of this shape should always stay in the top-right corner (the corner at 90 degrees). This is important because the shape has a pop-open animation, like a speech bubble, that scales from that corner.What’s happeningAt the minimum width, everything works correctly: the bubble

Hello,I have a big problem since a while.One of my After Effects projects linked to my Premiere Pro project has completely disappeared from my computer due to an error in both programs.I had saved it in a dedicated folder but I can't find it anymore even though it was still there this morning.Even the auto backups of the AEP project are no longer there, I only have those of the day before.Can you tell me how to recover this file?This is the first time this has happened to me.Thanks in advance.

I need to speak to a human support agent about After Effects. 

I was noodling around with captions in Premiere Pro and wanted to add animation and a bit of flexibility.  I had a quick look for tutorials and was surprised by how many talk about bring in captions as separate comps.  So I decided to see if I could use PP’s export as csv option to bring these into After Effects, as a single text layer.And then I thought I’d share the result:  

After Effects just auto updated to 25.3 last night and I had all my settings migrate over. However now Particular isn't showing up in the Trapcode menu with the rest of the suite's plugins. All the Trapcode plugins including Particular are where they should be in the correct plugins folder but even thought the rest of the Trapcode plugins are showing in After Effects, Particular is somehow missing. For context I am using a Legacy installer that I purchased in 2017. It has worked for me all these years with updated versions of After Effects and I never moved to the Red Giant subscription plan. Has this happened to anyone else?

Hi folks, B here.After trying to solve what may be a glitch or simple oversight I finally need to reach out to the hive mind. I am experiencing a problem in After Effects with a single MOV video My steps  Import the .MOV into a new composition. Select the video layer in the timeline. Use the Pen Tool or Rectangle Tool to draw a mask around a small bright blob in the footage. In the timeline under Mask 1:   Mask Mode = Add, no choice really works properly Inverted = unchecked Feather = 2–5 px   Observation: The video blacks out outside the mask, leaving only the masked area visible. Open Content-Aware Fill → Fill Method = Object → Range = Work Area → Generate Fill Layer.   The issue persists: original video outside the mask remains black.   Tried resetting workspace and creating a fresh composition. Mask path appears correctly under the video layer. Tried Pen/Rectangle tools with RotoBezier on/off. Timeline “None” dropdown ignored — no effect.  When I

The clips started in premiere pro and I replaced sequence with AE comp, in premiere pro I used gyroflow to help stablize the footage. I’m using Track Motion on 4K 60fps footage that’s been precomped twice and is now in a 1080p comp. I’m tracking inside the 1080 comp and applying the data to a null using Edit Target. The track itself looks solid with no visible drift, but once I apply it, the null starts in the correct position and then immediately drifts as playback begins. The null is currently parented to the tracked layer. Both layers are at 100% scale, and there’s no time remapping or stabilization applied.  

My trial using A solid layer as a page in Cinema 4D render in AEGood day everyone. I’ve been trying to simulate a magazine where its pages are fluttering as if a draft of wind/breeze. While comparing it to my reference, it feels like I am unable to capture the similar effect.I have shared my timeline below, mainly using the geometry - curvature and Y axis rotation to give the effect using Cinema 4D render.my timeline I would love to hear some feedback on how I could improve this. I have tried CC bend it and CC bender and even warp effects but none of them felt right so I ended up discarding those versions. Attached below is the reference I used -  reference video 

Hi, I’m trying to use Content Aware Fill, for the first time probably and it just won’t create any Fill for me. Not sure what I’m doing wrong, but I’v tried it as well on completly different footage and project and the problem persist. I upload the footage Create a Mask on the layer Set the Mask on Subtract and sets Feather Motion Tracker on Mask is not needed The hole is visible in Comp and in Content Aware Fill Clicks on Generate Fill Layer from Content Aware Fill After approximately 6s a new fill layer appears, however without any fill or content Immediatelly my CPU and RAM start going up until 100% (I have 64GB DDR4 RAM and i5-12600KF CPU) CPU stops going crazy when I delete the new Fill layer and my RAM drops to like 80-90%, until I reopen the project again. There is no visible activity in After Effects and I even left it for a moment running on 100% to see, if something appear in After Effects, however nothing showed up. For most of the time I don’t encounter hardware limitations

Is it it possible to run Duik Bassel.2 on AE2026? I’m so sick of this Duik Angela and how they’ve changed everything. What’s the point adding new features if you mess up the old and trusted and working features and change the whole interface so you have to re-learn everything? Anyway… This is what I get when trying to launch Bassel in AE2026. Mac Studio M4, Tahoe 26.2 if it helps. Thanks for your help! 

Why is colour management with dynamic link still such utter garbage? Why can't you just make anything straightforward? 

I'm trying to do some time remapping but when I edit my keyframes in the graph editor they look like this? There is no space for me to use the handles or do anything really. It is a reoccurring issue but I have managed to not have this in the past. I have hit F9 and the easy ease function and neither work. Any help would be much appreciated!      

Ever since upgrading to AE2026 I have been experiencing issues with plugins, in particular with Bodymovin:Simple vectors at root level with a 5 colour gradient fill show up as a black and white gradient AE2025 just works With Lottie:Trim paths animations simply do not appear at all AE2025 just worksWith Element:Certain frames simply glitch and render invisibly AE2025 just worksAre any of these known issues? Has anyone else experienced them? SPECS Intel Core i9-14900HX NVIDIA GeForce RTX 4060 64GB DDR5 RAM 1TB m.2 SSD [OS, APPS, PROJECTS, EXPORTS] 2TB m.2 SSD [CACHE] All latest Adobe 2026 (and 2025)/Win11Pro/and video drivers DELL SE2419HR 24"

I recently got a new laptop that’s specifically designed for modeling and editing software. I’ve been working on a project for the past week in the newest version of After Effects, but the program has been bugging out when I’m in the middle of working on it. The footage and all the tools freeze in the player so I can’t see what I’m doing. I’ve reached out to Adobe to ask for help, but the best they can do is connect me with a sloppy AI chatbot that can’t answer my questions or put me in contact with an actual person. Let me know what I should do.

I have been this issue for long enough but havent found a way to fix this yet !Im using AE 25,My GPU is an AMD rx 9060 xtAll my drivers are updatedI tried to reinstall both Red giant and AEI only have 1 monitorIf anyone could help me it will be very appreciated !! 🙏🏼

How do I solve this?? "After Effects error: The file path to this PDF document exceeds 260 characters and cannot be used. Move the file to a location with a shorter path." I am unable to do this move as these are source files from client...

Hi,So I want to terminate an effect to work exactly at a certain point, but before reaching that very second the effect must continue. Is there any way I can use an expression for this? please help me.  

In After Effects, the Effects panel randomly becomes unresponsive. The app doesn’t crash, but I can’t select any effects. It worked minutes ago. Sometimes it fixes itself, sometimes I must restart AE. 

I’m running into a 2–4 second delay when editing text layers. For some reason, it seems to lag every time the text is updated. Even after changing to another font (such as Arial), resetting the Character panel, disabling Faux styles, and lowering the preview resolution, the issue persists.This behavior doesn’t seem hardware-related.This is significantly affecting my workflow, especially given the premium price of the software. At this point, I’m considering moving to UE5 for motion graphics, particularly because of its real-time rendering capabilities. For reference, my setup:Ryzen 9 5990X / 64 GB RAM / RTX 3080 Ti 12 GB / 2.2 TB SSDAfter Effects is updated to the latest version.