Questions

I just updated to Lightroom Classic 14.0.1.  All develop history on edited photos is missing.  Is there a way to get the history back?

Well maybe high end is not the best word because its RTX 5060 but still this is not normal. So it goes like this. I open lightroom, i click on masks and detect people, detect sky etc, almost anything that requires AI. It completes normally but then after I switch to another image in develop preview and start using sliders or zooming in photo my whole pc starts to stutter so bad that only solution is to close lightroom and reopen it. If i have music in background it starts crackling, my mouse cursor starts to freeze and stutter, just unusable. AI things that trigger the problem:Masking but smart features like detect people, objects, sky etc. Super Resolution Lens BlurAI things that don’t trigger it:Remove tool DenoiseThings I noticed when problem starts:GPU memory fills to max, Lightroom system info reporting GPU memory is at 120% (is that normal ?)GPU usage jumping to 100% when zooming photo causing stutter to PCGPU memory doesnt go back it stays at max all the time even when AI job is

There is a recurring issue where the Loupe view displays an entirely incorrect image immediately following a folder import. Specifically, if a user enters the Loupe view before the initial preview fetching is complete, the view will load a cached image from a previous session - even if that image belongs to a folder that has already been removed from the catalog.While toggling between images can sometimes force the view to refresh, the incorrect preview sometimes gets “stuck”. This allows the user to browse the gallery in Loupe view and randomly see photos from long-gone folders, despite the thumbnails in the filmstrip displaying correctly. Steps to ReproducePrepare two folders containing a large number of high-resolution photos (to ensure preview generation takes a noticeable amount of time). Import the first folder into Lightroom Classic. Select any photo and press Spacebar to open it in Loupe view. Press G to return to the Grid view. Remove the first folder and its images from the L

Background: I was in the middle of restoring a Lightroom Classic catalog after a drive recovery. During the process, two folders got merged, let’s call them “June” and “July”.  Both folders exist correctly on my external drive.Current situation in Lightroom Classic 13.3:Only the June folder appears in the Folders panel It shows 1212 photos total — approximately 300 June images and 900 July images All images appear normal (no question marks or error badges), but they do have a white square that says Smart Preview.  All images have edits I need to preserve When I click "Show in Explorer" on a July image, it correctly shows the file in the July folder on disk But the metadata panel shows the June folder as the location When I try to drag July images to a different folder in LR, it says "All files selected are missing. No files can be moved."What I've already tried:Adding the July folder via Add Folder — resulted in 900 duplicate catalog entries, so I deleted the folderWhat I need:A safe w

Running on Macbook M5 Pro 2026.  MacOS 26.5.1.Fonts, including the application menu on 4K external display are not rendered correctly.  They look like they are being smoothed for a retina display.  Built-in display on the macbook looks fine.In the screenshot below, the width of the vertical lines vary depending on position.   

after  recent edited files they are getting lost and files cannot be found even though original file exists in LR classic  

When in Libary, move to a day with has a DJI Mavic 4 still photo .dng (114MB) the application becomes unresponsive showing the spinning colorwheel.  When Importing from the DJI media, it also imported the .jpg file.  The apps needs to be Force Quit.Loading a .dng file takes very long (~15 sec) and then after another ~15 sec it becomes unresponsive.Easiest to see experience with a second monitor, but also happens in Library single photo.The import also contained .mp4 files.  Lightroom Classic version: 15.3 [ 202604090947-8f3672ed ]Apple M4 Max - MacOS Tahoe 26.4.1Screenshot does not show the spinning color wheel but the zoom loop (in the center of the controller display)  

I wanted to follow up on this topic as it's been radio silence on it for nearly 8 months since AI DeNoise was launched.  In the meantime we've not only had multiple updates by Apple to Ventura, we've also had the release of MacOS Sonoma which is rapidly approaching the release of version 14.2.   While I have pretty much left Topaz behind with the release of Adobe's DeNoise and my dissatisfaction with earlier releases of PhotoAI, I just checked it again and with their model updates its now back to being the equal of Adobe's Denoise, but it's a lot faster--it takes less than half the time to process a file on my M2 Ultra with Topaz as it does with Adobe DeNoise.  They are using the Apple Neural Engine, regardless of any bugs--and this is confirmed as I can monitor the power draw of the neural engines in the console as I process images.  DxO is also using the neural engines.  Clearly there are ways to work around the bugs, or these companies have already taken adv

I’m getting the “AI Edits Storage Error” in Lightroom Classic, and I’ve already followed all the steps listed on Adobe’s help page, but the issue is still happening.Here’s what I’ve tried so far: Confirmed there is enough free disk space Restarted Lightroom and my Mac Ensured only one instance of Lightroom is open Gave Lightroom Classic Full Disk Access and Files & Folders permissions in macOS Verified my user account has Read & Write permissions Checked that the catalog and .lrcat-data folder are accessible Not using any cleanup tools or cloud sync on the catalog while Lightroom is open Despite all this, the error continues to appear and AI edits fail to save properly.

Lightroom Classic 15.3.1 on macOS Tahoe 26.4.1, Apple M4 Max, hangs with “Not Responding” during Loupe view / quit / preview build. Full Disk Access is enabled. Fresh install and fresh catalogue tested. macOS hang report shows: “Deadlocked: 1 thread - Thread 0x2be29 AgServer” and “Blocked by Deadlock: 7 threads - AgServer”.full hang report here

It will not let me open lightroom classic. It pops up as repair and the process stops, and wont move. I’m paying for something i can’t use.

Mon processus actuel est de passer via bridge pour la previsualisation et les mots clés, puis d’effectuer un premier jet de traitements via Camera Raw.Je viens de faire des importations dans Lightroom classic et là surprise, je ne retrouve pas les modifications effectuées dans Camera Raw?Pourtant les xml et air sont bien dans le même dossier que les fichiers raw.Comment faire?Merci

in a RAW landscape photo, when I want to emphasize distance I should be able to use the Depth Range mask. I should be able to access it via the Range Masks. where one can find Luminance Mask, color mask and Depth Range. Depth Range is greyed out and not available. Using Shift D yields no response. why can it not be used? Isn't it available to LRc version 15.3.1?

Is it possible to import my PSE26 catalog to Lightroom Classic? It seems looking at the list only up to 2021 might be supported. Lightroom Classic 15.3.1 Photoshop Elements 2026 Organizer PSE26DB catalogIf it isn’t, is it likely to be added or do I need to make a decision about whether I can be bothered to start over with 50000 photos which have been tagged, faces added, albums created, dates and places all checked?

Lorsque j’indique le n°de série pour la mise à jour de LR5 soit <deleted>on me demande un n° de série précédent que je n’ai plus puisque cela fait très longtemps…Pareil pour LR6 soit <deleted>, or sur l’explication de l’installation on me dit que si on me demande le numéro précédent, il faut indiquer 0000-0000-0000-0000-0000-0000 mais rien ne marche, on paye et nous ne sommes pas libres de réinstaller nos ACHATS, merci Adobe….

Lorsque j'importe dans Lightroom Classic un fichier raw et son xmp déjà traité dans un catalogue Lightroom Classic sur un autre Mac, les modifications déjà faites n'apparaissent pas... Comment faire??? Merci

Seit ein paar wenigen Tagen erstellt LrC keine Himmel-Masken mehr. LrC scheint diesen nicht mehr zu erkennen. Vorher lief das problemlos. Die anderen Masken scheinen zu funktionieren (Ausnahme: Landschaft. Auch dort erkennt er keinen Himmel). Habt /hattet ihr das selbe Problem?Konntet ihr das lösen und wenn ja, wie?

This error message appears when I try to open LRC. The version I have is 15.3.1. I have exited LRC on my other laptop. I’ve also tried to uninstall LRC but it isn’t doing so. Any suggestions, please?

When trying to open a recently created catalog in LR Classic 15.3.1 it crashes. This happens when opening one specific catalog under Tahoe 26.5.1. Other catalogs open just fine with no issues. This happens if I launch LR first then go to ‘Open Recent’ or if I double click on the catalog and try to open it through the finder. It is as if the catalog has been corrupted.  

I have backed up my Lightroom Classic catalog about once a week since early 2020 using the popup when exiting Lightroom Classic. Ever since January 2023, I have been unable to backup my catalog as usual. Every time I have gone to backup the catalog since then, I receive the error message "(Lightroom was unable to back up the catalog named "Lightroom Catalog-v12") please check your folder permissions, and make sure that you have available space on your backup drive and main catalog's drive". STATS:Windows 10 Home Version 22H2Lightroom Classic Version 12.3Main catalog is located on C: drive with 235GB of free spaceBackup folder is located on B: drive with 985GB of free spaceLast successful backup was on January 14, 2023, named Lightroom Catalog-v12.zip, and is 1.8GB in sizeThe backup fails at roughly 70% completion and the last visible stage is "Compressing catalog backup" before receiving the popup error message After version 12.3 was released today, I updated and tried yet ag

I haven’t been using LrC recently (the last 6 months or so) during which I’ve seen several updates.  Today I needed to process several hundred CR2 images (5760x3840) and find that performance has gone through the basement.  Switching between images now takes anywhere between 2 and 15 seconds with no rhyme or reason for the long delays.  Even skipping back one image, which is usually instantaneous, sometimes takes 5-6 seconds.  Here’s my hardware:Ryzen 9 7940HS (8 core 16 thread) with Radeon 780M 64GB memory LR catalog, previews, and raw cache are on a local SSDI have tried all settings of GPU acceleration (off, on, auto, custom) with no discernible effect.  I tried increasing the raw cache size to 50gb, but LR doesn’t seem to be using it.  After scrolling through about 200 raw images, total cache usage is only 28MB, far below the actual size of the raw files (11GB)I’ve also optimized the catalog, purged the raw cache and regenerated standard previews.  That last step helped somewhat bu

See in “Title”

Verwende LR classic 15.1. Meine Bilddateien befinden sich im Netzwerk auf dem Synology NAS DS418 im Verzeichnis Bilder. Unter \\DS418\Bilder kann ich auch darauf zugreifen. Wenn ich neue Dateien importieren will, so finde ich dieses Verzeichnis in der rechten Spalte des Importieren-Fensters jedoch nicht. Und das obwohl andere Verzeichnisse auf dem NAS angezeigt werden.Ich bitte um Abhilfe.Mit freundlichen Grüßen,Joachim Müller-Klink 

Introducing Assisted Culling (Early Access) in Lightroom Classic. For providing feedback for Lightroom Desktop, click here.  TL;DR – Assisted Culling is getting faster, more powerful, and more accurate as we head to GA. If you tried in October 2025, we urge you to try the new version and give us feedback – especially for wedding & portrait photographers. We’re eager to hear your feedback!  Assisted Culling has received several updates since Early Access launched in October 2025. If you tried it then, here's what's new:  April 2026  Significantly improved handling of shallow depth-of-field for photos – a major customer ask. Images with intentional background blur are now more reliably recognized and kept rather than rejected as out-of-focus.  We’ve retrained the “Reject model” so it has more accurate identification of reject-worthy images. Additionally, an image can now be flagged under multiple reject reasons simultaneously:  Exposure Issues: includes a sensitivity slider so you

I have a Windows pc with LRC installed. What should my settings be in the export dialog in order to export 24MP photos at full resolution. At present, images exported are no longer shown at full resolution or size, after switching to a new pc? Also, images exported with JpegXL selected do not export correctly. The Microsoft Store has tried to sell me a download for the problem - does Adobe have a fix?