Questions

Hello fellow sufferers!how do i .....  get rid of "select subject remove background" box photoshop 2026 it is in front of image i am editing and wont move!thanks

Hi I'm using Photoshop and want to Focus stack four images.  The videos I have watched have started with  sugestion to use Auto aline images. I Found align buttons but not auto line.  The next step was to Blend images.  I cannot fine a blend button .  One suggestion was to find this in the Multilayer option, however I cannot find that either.Is there a current video that explains how to focus stack images.

A year ago, I made a two-up image to print on a large sheet because the image is popular.  I did some editing on it today while it was still in Frame mode.  Now I can't rotate it or isolate the image because I can't remember how to get it out of frame mode.  Been too long, I guess. I've copied the image to clipboard and pasted it on a new canvas, but it is carrying the Frame-ness with it.  How do I get it out of Frame mode, with edits intact?Any suggestions would be greatly appreciated,WV

So, to start; here are my specs: Current version of PhotoshopWindows 1164GB DDR4 RAM at 2666mhzIntel i7 9700KEVGA 2070 SuperAnd the important pieces:A Samsung 970 EVO Plus 2tb with 1.3tb of open space (this is the drive photoshop is installed to)A backup SATA SSD 500gb with full space openI also have other backup drives, but they don't have the speeds needed for scratching. For the better part of 2 years I cannot get my allocated scratch disk space above 41.6gb.I just recently wiped every Adobe program and temp files to do a fresh install of the Creative Cloud and all apps that I use. This didn't fix anything. When messing with performance, like increasing RAM percentage, Cache Levels, reducing History States; nothing changes. When telling Photoshop to just use my 500gb SATA SSD, it still only uses 41.6gb. I'm very lost with this, so I'm really hoping someone can finally help me figure this out. 

Hello Everyone, My name is Soumitra Dutta, oxford based an entrepreneur, Author & Photographer.  I’m working on improving the realism of my composite images in Photoshop, especially when it comes to lighting and shadows. From your experience, which advanced techniques or workflows have helped you create believable light direction, shadow depth, and overall visual consistency in your composites?

Hi everyone, We're excited to announce a new Adobe Community experience is coming this January. A little bit about the update:The new experience will be simpler to navigate, make it easier to connect with other creatives and Adobe experts, and will give you clearer ways to share feature ideas, enhancement requests, and bug reports—with greater visibility into their status with our product teams. In the meantime: Adobe Community will remain active. Keep using it as usual—there will be no interruption in access. In fact, you’ll notice even more Adobe Experts on deck to provide faster responses before, during, and after the update. No existing content will be lost in the update. Every single post, reply, solution, feature request, and bug report you’ve made will be transferred to the new experience. You won't need to recreate anything. Existing content will reappear in two phases. When we launch the new community, all posts created on or before November 16 will be there from day one. Aft

While developing a UXP Plugin I required to add some keyboard shortcuts. I used the correct setup described in the manifest recommendations (this is the Adobe exmaple, not my usage):"shortcut": {"mac": "Cmd+Shift+P","win": "Ctrl+Shift+P"}However, when called they don't work. Any clues to what I am doing wrong?

I am trying to set up a mask for a lenticular image. The resolution of the Photoshop document is 1440 to match the output resolution of my printer.I create a 4px  by 6" shape that I need duplicated every 28 pixels for the full 4".In Illustrator, this is no problem, but forget it if you think you can paste from Illustrator to Photoshop.How can I get Photoshop to repeat this 4px shape every 28 px? It has to be precise. And before anyone gets on about lenticular lenses not being exactly 60 lenticules/inch, I am well aware of this. By taking the measured lenticules from the pitch test using the same printer, I find that the actual lenticule size is 60.189 so when I make the mask for 4px--that assumes 60 screen. Then I just print at 60/60.189 % and the lenticules come out correct.  

Perchè se in photoshop creo una selezione del cielo e la salvo come canale me la salva invertita ?  

Thanks to everyone who took part in our previous 'Lucky New Year' challenge. There were some great ideas and very cleverly put together images.   This week, in world of constant change, I thought we might take a trip to this timeless beach at Balnakeil in north-west Scotland. In reality, of course, with any sandy beach it too is constantly changing. So, what can you make with it? The “rules”: Use the starter image as at least part of your own image entry. Anything goes, as long as it meets the forum rules on decency, copyright, etc. Anyone, and everyone, is welcome to have a go, whether you are a complete beginner or a Photoshop expert. This is not just for our forum “regulars”. The challenge is not limited to Photoshop. Any Adobe software can be used.  There are no prizes apart from the chance to practice, show off your skills, or bring a bit of humor and fun. Don't be shy, join in and have a go! The starter image is made available for you to use in this forum challenge onl

1. I use Adobie Photoshop 2026, I renew it yesterday, but this bug was also present in previus version of Photoshop.2. Mac Sonoma 14.6.1. Hello,I am experiencing a serious issue in Photoshop that is making it almost impossible to work.While creating layouts with artboards, random ghost text/duplicated numbers start appearing all over the document.The text shows up on random layers and random places, even where no text layer exists.Once it starts, the file becomes unusable and the problem spreads to every new file I work on.Also can be opening random image/photo and it can have text from previous file where all over the image. What I observe:The duplicated text looks like fragments of existing text (prices, numbers, symbols)It appears across multiple artboardsIt is not linked to a specific layer it can appear on any other layers with image or with other layers with text.It cannot be selected or deletedSaving, reopening, or duplicating the file does not fix itIt visually “burns

Boa Noite. Ate começo de janeiro utilizada normalmente o photoshop.Porém essa semana não consigo mais usar o aplicativo, ele trava todo. Fala que falta memória raw. aceleração da gpu, além de travar todo o computador. Já fiz de tudo. Desinstalar e Reinstalar ambos (Photoshop e versão Beta);,  Instalar versões antigas (Photoshop e versão Beta), No meu Creative Cloud consta como Câmera Raw instalado na máquina., Tentei instalar externamente através do site adobe, Reinstalei a máquina diversas vezes, Limpei as preferências do Câmera Raw para o padrão de fábrica. Me ajuda por favor

I see there are a few threads similar to this, so I have the same problem. I am unable to deactivate PS CS5.1 from the old PC. I keep getting a "connect to the internet" error message. I just spent over 50 minutes on the phone with someone from Adobe and a remote session. I saw her attempt to deactivate it and turn off the firewalls, still no luck. Obviously the internet is working, if there was a remote session. There have been 2 installations, but I am no longer able to access 1 of the 2 prior computers. It's dead. I was able to download my purchased copy of CS5.1, and it installed fine on my W11 desktop, and it worked- for a short time. It no longer goes past the register window. Obviously, the Adobe system is working on the new installation end, but I am unable to deactivate. Intended issue? Apparently, the deactivation has to be done from the local device. Anyone have any insight to this? Other than they want me to subscribe? Thanks

Hello.  I have a new computer and monitors.  If I launch Photoshop from within Lightroom (i.e. right-click on the image in LR then select <Edit in Photoshop 2026>), Photoshop launches and is maximized as it should be on my monitor and the image fits on the screen.  After I close that image and return to LR, the next time I select an image from within LR and select <Edit in Photoshop 2026>, Photoshop is "too big" and I have to select the upper corner square to Maximize PS then I have tell Photoshop to fit the image on the screen.  This ONLY happens when PS remains running.  If I completely exit PS, the next time I open it from within LR, everything is fine.  Any suggestions?  Thank you 

My laptop is less than a year old and is set up to run PS.I am updated on Windows 11.I'm running PS v26After it applies the Neural filter, it immediately shuts down PS, with no save. I have removed some of the larger files to an external, and I have a lot of space on my PC.I will run a cleanup on the laptop after posting this, but I have no expectations that it will improve the situation. Thoughts? 

Hello, I'm intermittenly getting a pop-up when i try to use the generate taskbar stating "This feature is currently not available" . I will restart sometimes or delete and reinstall and it will work - but at times the error keeps coming up. Why could this be? I'm on a MacBook Pro, Apple M3 Max, 64 GB, Tahoe 26.2. Thank you!defaultve6o9txip2qw_0-1769455361823.png 

I am a professional running Nila Studio and I pay for two active subscriptions: Adobe Stock and Photography 1TB Plan. My hardware (Intel i5 6th Gen) only supports Version 24 (2023) stably.​The following issues occurred during my chat:​Agent Piyanshi told me Adobe doesn't support 2023 and suggested I purchase it from a third party.​Agent Mukesh claimed there is no temporary link available for v24.​Finally, I was told my subscription 'does not require an installer', which is impossible for Photoshop

Je dois convertir un dossier de 300 images TIFF RVB en TIFF CMJN.Comment faire sans convertir les images une à une ?

When I resize a floating window it's like the image follows the movement and sqeezes or stretches.See this video: https://youtube.com/shorts/aWNXhoBzp3I Obviously I've tried the classic tip for fixing every possible problem in Photoshop: reset the preferences. But it didn't work. My GPU is a RTX 5060 8GB and I'm using Windows 11.

Bonsoir J’ai 2 ordinateurs sous Windows 11 où est installé Photoshop avec la mise à jour de début Décembre.  Avec le PC portable pas de problème. Par contre avec le PC fixe (i7 – 14700K, Ram 32 Go, CG RTX 4080 Super) j’ai 2 problèmes se sélection qui ont peut-être  une cause commune.Lorsque je clique sur les menus à partir de Calque, Texte, Sélection etc., temps que je reste sur le nom (bouton gauche enfoncé) la fenêtre correspondante se maintient mais dés que je descends pour sélectionner un élément, la fenêtre bascule au menu de gauche. Cela veut dire qui si je veux par exemple aller au menu Texte je dois d’abord sélectionner le menu juste à droite Sélection.Quand sur une photo je sélectionne l’Outil Supprimé et que je clique à un endroit de la photo l’empreinte rose au lieu de se limiter à la taille de l’outil génère egalement un trait rose de 5 cm environ de long à  la taille de l’outil avec un angle de 10 à 15° vers le haut.Pour information il y a 2 semaines, j

DecemberUpdate.jpg   We're happy to announce the release of Photoshop v27.2   What's new in this update?  The latest release of Photoshop(v27.2) includes performance enhancements and fixes for customer-reported issues.    Support for Flux.2 pro model in Ps Desktop: Get results closer to your intended style with the new FLUX.2 pro partner model in Generative Fill. Click here for more details.   Notable Fixes in this release: Stroke applied to text fills the entire bounding box.  Loading Presets appends numbers to the folder oddly.  Select Subject features are not working through Actions. Photoshop freezes when we try to manually enter numbers in the color picker in Replace Color. [Mac] With Find Layers, the Name field becomes out of focus when entering text after displaying "No layers match the filter". Color distortion displayed w

When a Pattern Overlay layer style is configured with "Linear Light" blending mode in Photoshop 27.2 and the file is saved, the blending mode is not preserved when opening the file in older Photoshop versions or the current Beta version. The blending mode automatically reverts to "Normal" instead.We're working on macOS Sequoia 15.7.3 on Apple Silicon. PS Version 27.2 is affected.Steps to Reproduce:Open Photoshop 27.2Create a new document with a layerApply a Pattern Overlay layer style to the layer (Layer > Layer Style > Pattern Overlay)Set the Blending Mode of the Pattern Overlay to "Linear Light"Save the file as .PSDOpen the same file in either:An older version of Photoshop (pre-27.2)The current Photoshop Beta version Expected Behavior:The Pattern Overlay layer style should maintain its "Linear Light" blending mode setting when opening the file in different Photoshop versions.Actual Behavior:The Pattern Overlay blending mode automatically changes from "Linear Light" to "Nor

Hi all since the last update (projects new feature) I can't save files on cloud.Tested:1 - Created a new file and save to cloud: failed2 - Upload a new file into the cloud: failedError message: Could not complete the Save command because the item was not found or you don't have access to it.I'm on a macbook pro, library is sync and all apps are updated thanks

Hey, do you have any updates ? I've found that when I use Photoshop (27.2), my Intel Arc A770 GPU isn't used at all.It defaults to CPU, which spikes to roughly 80% (on an AMD Ryzen 9 7950x...). I've tried every "fix" listed below and on other articles, nothing's making it better....   The funny thing is that I don't have any problem with this GPU on other Adobe applications... Drivers are up-to-date : 32.0.101.8425   Here's an insight on what's happening :Here, I only moved the image randomly...

I've had an ongoing issue with the object selection tool crashing (version 26.11.2) on my win11 PC .  My photoshop version 25.12.3 functions ok, but the liquify tool no longer works.  I installed version 27.2 today, and I am having the same issue(s). The object selection tool crashes PC, also the camera raw /masking/ select object and sky causes a crash. (Bridge 16.0.1). Liquify works. I tried all online suggested preferences fixes for performance and Image processing with no good results. Windows 11 is updated. The system is fully compatible. The GPU graphic card is up to date, and compatible for all versions. The device manager display adapter shows that the Radeon RX 580 is up to date, and in use.  I reset the photoshop preferences upon version 27 start-up. No luck. What am I missing?