Resuelto

Hi everybody, I’ve got a file with lines with pattern brushes on like in this attachment. However, the file with these in has stopped allowing you to select the line. Therefor, you can’t select the line any more to turn the pattern brush off or to modify anchor points in the shape.In image 1 the line is selected and can be modified but in image two the line in the shape is not selected or selectable. It has just selected all the shapes within the pattern brush. I can’t select the line in that shape any more! I could just make the line again when I want to edit it but that would be annoying and waste time.Thanks for your help,Gareth 

After the last update of the application, the following pop-up appears every time after launching:  How can I stop it?Thanks in advance.

Försöker installera min CS 5.5 Design Standard från min CD som jag alltid gjort. Nu har min gamla dator gått sönder och försöker installera igen. När jag skriver i mitt licensnummer säger rutan att jag redan har programmet intstallerat på två dator och jag inte får på denna. Det stämmer inte, kan ni hjälpa?

Two issues that seem connected. Transcription tool usually works the first time in an edit session, but after a period (5-30mins or so) it stops working - it gets stuck in limbo saying “creating auto transcription” without progressing.At which point premiere usually stops working entirely. ie unable to load clips, play timeline etc. Saving the project is possible though. Upon rebooting the app, everything works fine for a period, including transcription, then the same thing inevitably happens. The freezing also occasionally happens without even using the transcription tool. I’ve tried many suggestions on multiple forums (eg clear media cache, revert to saved layout etc etc).Also tried going back to previous premiere version as this issue only started happening recently. nothing has helped so far.Working on an M4 macbook pro with plenty of RAM, using external drive for media. 

my computer updated automatically to Photoshop 27.9 yesterday. Want to revert back to the previous software version. The 3 dots that are below the PS symbol to request to install an earlier version are no longer there. Any ideas what to do. Thank you 

At first, I was using the normal version of Adobe. I was then offered the option to try the 7-day free trial of the Premium version, which I accepted. However, I cancelled the subscription on the 5th day, well before the trial period ended.Despite cancelling within the trial period, I was still charged for the Premium subscription. I did not authorize this charge and would like to request an immediate refund of the amount charged.Please review my account and confirm that the subscription has been fully cancelled without being paid for cancellation fee and that the refund has been processed. Thank you. 

Adobe stock video cannot import into Premiere Pro project.Error: File contains more than one image descriptor.How do I correct this? Tried to convert in Media Browser, but permissions do not allow import into MB either.Here's the stock File link: https://stock.adobe.com/video/laguna-beach-ca-shows-cove-aerial-video/151661371?prev_url=detailThanks,

I am writing to formally lodge a complaint regarding a severe and ongoing abuse of Adobe Firefly’s free trial and promotional credit system. This large-scale exploitation is not only a violation of your Terms of Service but is actively degrading the user experience for legitimate, paying customers.1. The Nature of the AbuseI have strong evidence indicating that organized commercial entities, specifically based in Vietnam and China, are systematically harvesting free trial credits to generate tens of millions of images daily. These are not individual users testing the product; they are industrial-scale operations using automated scripts and bulk-account generation to bypass your payment walls.2. Impact on My Business (The Victim)As a legitimate user who pays for Adobe Creative Cloud, my workflow has been severely crippled by this activity: Extreme Latency: Generation requests now take 3 to 5 times longer than they did previously. Queue Blockades: The servers are constantly saturated,

I have two .ai docs and when copy/pasting graphics from one, the appearance drastically changes. I need them to stay as they are in the first image. Both are in RGB mode 

Hello,My Creative Cloud subscription expired because my payment failed. My Adobe account is currently set to Italy, but I need to change my account country to Greece because my billing address and payment method (Revolut) are in Greece. I also have a Lightroom cloud library that I don't want to lose by creating a new account.Can an Adobe employee help me change my account country from Italy to Greece?Thank you.

We are looking to purchase some Adobe Acrobat Standard licenses for some company users. I tried logging into the Acrobat Business Admin Console with my Adobe account, but it’s giving me the following error:  I am the IT administrator for the company, so just how do I get access to the Admin Console so I can purchase and distribute licenses?Thank you.

Bonjour,Depuis deux jours je ne peux plus modifier mes photos dans photoshop depuis LRC. Un message me dit "problème de connexion entre LRC et PS. Essayer de réinstaller PS" Comment réinstaller PS en conservant l'ensemble des réglages et actions mis en place.PS: le problème n'existe pas depuis mon mac book, c'est seulement sur le mac de bureau

How can this be fixex I dont want to be charged anymore.

In Premiere Pro, what is the red left bracket with a black double headed arrow running horizontally through it? This feature highlights portions of sequences in the timeline. I accidentally making it appear and I don't know how to make it go away because I don't know what it is.

I’m trying to very simply automate a form for work and I learned a couple things with JavaScript, but I have no prior experience. I’ve seen similar versions of this question get asked here, but I can’t figure out why my output is not working.I have one field called ‘Total Impervious Surface’ (TIS) that I’m trying to bring the value into a custom calculation for, do some simple math to, then output this value into the field that this custom calculation is attached to. This TIS field is the product of simple addition of two other fields that is working fine.Currently I have:var TIS = this.getField("Total Impervious Surface").value;    var SSDC = 55*(Math.ceil(TIS/500));    event.value = SSDC;And getting an output of 0 when TIS is any value other than 0. When TIS is 1000 the output should be 110 or when TIS is 1600 the output should be 220 and so on.The SSDC output is also intended to be a dollar value. Can I use the num.toFixed(2) command and where would it best be used? - Nevermind. I g

I need to get in contact with adobe as I am being charged for a subscription I didn’t subscribe to and when I try to cancel it say I will be charged the remainder of an annual subscription fee. What should I do?

Trying to cancel a subscription and instructi9ns available don't work. No option to cancel seems to exist and no contact info other than this forum to seek advice.  Please anyone??

Premiere Pro crashes unexpectedly on Win11 with Amd Graphics CardSteps to reproduce:1. Open Premiere Pro2. Open up a project (only .mp4 videos)3. Everything goes well in the beginning and after aprox 15m everything crashesKey details:There is no trigger to it, it just randomly does that although I have a high-end pc. This applies to all projects and I have NEVER used Premiere Pro without having it crash on me, not even once. Video Rendering: Mercury Playback Engine GPU Acceleration (OpenCL) Sometimes it crashes and other times my pc fully crashes. I never keep RAM, CPU, or GPU hungry applications while Premiere Pro is running I usually only have my browser running in conjunction with Premiere Pro. Windows Crash Logs (Goes back 1h):Full - https://www.dropbox.com/scl/fi/zpb0clan1mm81rv4okkk3/adobe-premiere-pro-crash.evtx?rlkey=v2l7yvrhsc98sg31y9k0rjzbp&st=tcx2l9m8&dl=0Minidump - https://www.dropbox.com/scl/fi/8b6t61k9n4scnsymr5a3s/072426-6640-01.dmp?rlkey=yvdsd6680hmb8rhxs3qg5mj7

I have a canvas 8000x11412 pixels the image is the same dimensions. When I go to print it doesn’t fit the paper. Which fwiw is A3+.  The printer settings say the correct document size and that output paper is the same. I have an earlier closely identical image which previews and prints fine. I think there is some hidden setting I have inadvertently set.This is a shot of the image When I go to print the preview just shows a small part of the image  

Hi Folks. I often need to design stickers and I'm finding that when I print them they are smaller than what I've actually created in photoshop. I will design the actual sticker/image and then drag it onto a blank A4 page where I size it (in cm's) and duplicate it if needed. However when I print it, even though A4 is selected in print options they always come out smaller. I usually get a prompt saying something along the lines of "image too large, resize to fit" or words to that affect.Is there something I need to be doing in print settings to ensure they print true to the size I've created. Any help in this matter greatly appreciated. 

On the example below, currently N/A has to be entered manually by typing in the cell or freehand using a stylus.  This is causing some issues with the time taken to complete some of our larger forms and also handwriting skills and neatness vary greatly between our personnel, as can be seen in the 2nd pic below.The plan is to add a 2nd column with an ‘N/A?’ checkbox next to the numbered ones so that selecting it would add ‘N/A’ to the adjacent fillable cells - and possibly grey them out as well.  The 1st pic below does show the fillable cells coloured but once entries are made and the form saved, when reviewed using Adobe Reader the shading is not visible.  It would be referrable to retain the shading if at all possible.As in the 3rd pic, is it possible to get just one entry of N/A added and the rest of the cells lined through from corner to corner?I’m relatively inexperienced using scripting in Acrobat in this manner so any assistance would be very much appreciated.   

This feature I have used in the past and always worked very well, now when I upload videos and select remove background it successfully cuts out the shape in front but then rotates the video underneath and stretches how it looks.   

Everytime I open lightroom classis now and try to use my pixieset plugin I get the error code #1000 "Connection failed, please check your internet connection and try again". I have strong internet connection so this isn't the case. I am using Lightroom classic v 14.5.1 on Windows 11 and recently switched internet from spectrum to fiber, not sure if this has anything to do with it. I have removed and added the plugin several time as well. Would appreciate any insight, this has been very frustrating!!

I'm requesting clarification—and frankly, accountability—regarding GoodStack's denial of our nonprofit application for Adobe products.Our OrganizationAdult & Teen Challenge of Central Canada is a registered Canadian charity operating long-term residential programs. We are not a hospital, clinic, or medical facility. We employ no medical staff. We provide no clinical treatment, detoxification, or healthcare services of any kind.Our program is a faith-based discipleship community where individuals live and work in a supported environment while rebuilding their lives. Residents participate voluntarily. The model is closer to a residential training program than anything resembling medical care.The DenialGoodStack denied our application on the basis that we are a "treatment organization." However, Adobe's published ineligibility criteria state:"Hospitals, clinics, or facilities providing direct medical care"We are none of these. The word "treatment" does not appear in Adobe's eligibilit

Once a photo is loaded from my library, after hitting develop, pictures have color splotches on them that makes editing them impossible. This seems to have started on or about 7/20/26.Original:In Develop mode without starting any editing (note: I have restarted my computer since the issue started):