Solved

I've written a script that provides a page and table count for each document and a total for a book.  I also want a count of all figures in each document. I tried the following, but counting graphic objects gives me a count that is many times more than the number of figures in the document.  function countFigures() { figureCtr = 0; var figure = doc.FirstGraphicInDoc; while (figure.ObjectValid()) { figureCtr++; figure = figure.NextGraphicInDoc; } return figureCtr; } I've searched the forum for other examples, without success.  We work with relatively large books and these totals are useful in assessing the level of effort for each book.Many thanks in advance...

I have a folder of Raw files - DNG. What is best or easist way to batch these color images to a folder of black and white   jpegs? Is there an action to upload somewhere?  Or would  the image processeccor do that somehow?  Or ?  Thanks.

Como faço para habilitar está opção ? Ela aparece desabilitada.

노이즈 감소 - ai 노이즈 제거 사용 시 알 수 없는 오류가 뜨면서 제거가 되지 않습니다.  

며칠째 안풀리고있는데 이거 해결 방법이 있나요...? ㅠ  

아 짜증나네 진짜... 챗봇은 무한 반복이고 결재했는데 사용을 못합니다.확인하고 처리해 주세요

フォトショップでマッチフォントのテキストオプションが「%」でしか選べず、日本語の選択肢がありません。環境設定削除し、再起動など試しましたが改善されません。フォトショップのアンイストール、再インストールも行なっています。使用しているPCはMacで、SequoSequoia 15.4.1です。Photoshop2025を使用しています。最近PCを交換したのですが、交換してからこのような状態です。

라이트룸 프리셋 다운 후 프리셋이 적용이 안되는데 해결방법에 대한 조언 부탁드립니다.ㅜㅜ​왼쪽화면에 프리셋 리스트는 뜨는데, 커서를 해당 프리셋에 갖다 대도 불러 온 사진에 변화가 없습니다. 적용이 아예 안되요 ~ 해결방법 아시는 분 계시나요 

Substance 3D Stager 3.0.4 버전까지는 괜찮은데 3.1.0 ~ 3.1.1 버전은 실행하면'애플리케이션 재시작 필요' 에러창이 뜨고 작동이 안됩니다. 에러창을 닫으면 뷰포트 화면이 안보입니다. 지우고 다시 설치해봐도 똑같습니다. 화면은 첨부했습니다. 

Somehow, I changed the display of my FrameMaker window. The file list on the left is correctly placed. The content window, though, is expanded across the rest of the window, and the catalog panels are floating on top of the content. I want the content to be expanded only as much as it is magnified, with the scroll bar at the right edge. Right now, the scroll bar is at the far right of the window. I hope I've explained this right. Just in case, I've included a screen shot. Can you point me to the section of the help that tells me how to properly magnify or set up the window? 

Hi all,I've been 'fighting' with scripts to autogenerate about 69K country flag-based NFTs. I got most of it working fine, but the final issue relates to applying a clipping mask to a rectangular flag (to give it rounded corners). The template looks like this (flag of china with a vector mask and effects applied)  However, after multiple different attempts, finally settling on clipping mask, the output still looks like this:  Here is a summary:Brief Summary of the Attempted Methods to Apply Rounded CornersTo give the new flag (Flag - New) rounded corners with a 150-pixel radius in Adobe Photoshop, we’ve attempted the following approach:Create a Rounded Rectangle Selection: We generate a rounded rectangle selection matching the flag’s dimensions (1650x1100 px) with a 150-pixel corner radius using the executeAction method with the setd command, specifying a roundedRect shape.Fill the Selection to Create a Mask Layer: We create a new layer (Flag Round Mask), set the foreground c

I have a ton of actions on my laptop I would like to move over to my MacMini. how do I go about in doing this?

I usually start a project with my VOs using a Tube-Modelled Compressor effect.I would love to not have to go into every track and turn on the compressor and then set all of the settings to my specs every time I create a sequence.Does anyone know if it's possible to save a sequence preset with the audio fx loaded?The only option right now is to create a template project with a sequence created and ready to use.It's not a bad option, I know, but just wondering.  

Dear Readers, It came to my attention that lightroom classic doesnt use any AI features, is that true ?   On true statement, where can i buy this product ?   Best Regards, Roman

I am hoping someone can help me.  I have CS6 which is basically all I need for my what I do with my photos.  I had it installed on my old computer and am unable to transfer it to my new one since it states that it is already in use on two computers.  I deactivated it on my old but still getting the error message.   There is any work around to activate it on my new computer.  I have never had this issue before when upgrading computers.  I even tried to go back and open it on my old computer to make sure it was deactivated and it is now stating that  the license on it is no good and already in use by two computers. 

HI! Is there any way to enable the different GPU options without going through File > Project Settings > General? Because all my options are currently disabled.Of course, my Imac is an old one with an NVIDIA GeForce GTX 780M 4 GB graphics card. Thanks!

Hallo,ich bekam gerade eine Mitteilung, dass ein Naturfoto von meiner Rose entfernt wurde. Wegen Verletzung der Vorschriften. Das Foto habe ich mit meiner Kamera in meinem Garten gemacht. Ich kann nicht verstehen, was daran jetzt falsch ist. Ich hab keine Vorgaben ect. verletzt. Kann mir jemand weiterhelfen?Liebe GrüßeBea

I have 13 photos which are waiting for approval, since 8 months...   [Moderator moved the thread to the correct forum]  

I know you can set the default initial view for any document after that document is open, and you can set default page views (e.g., one page, two page) for all documents, but how do you set the Show Cover Page in Two Page View the default initial view for all documents?

Hello,   My photos have disappeared from my Lightroom Mobile account. They were previously uploaded and synced via the cloud. Now, when I log into my account, neither the photos nor the presets are visible.   Please help me understand what happened and assist in recovering the data.   Thank you!

What is the special use of “Direct Copy” under the Edit menu?Is the offset of the copied object randomized,Or can it be set?

HiI would like to know which one of the following spaces in InDesign is a non-breaking space: Em-SpaceEn-SpaceHair SpaceSixth SpaceThin SpaceQuarter SpaceThird SpacePunctuation SpaceFigure SpaceFlush Space I am in need of giving a non-breaking space but its width is too sless. I need atleast quarter space width non-breaking space. I was thinking of giving a character style to actual non-breaking space and setting its width to 200% but its my last preference. Thanks

I've opened a flat form in Acrobat Reader DC, and used fill and sign to fill out part of it. I saved the partially completed form and went back to work on it today. I realized one of the fields was incorrectly filled in, but when I tried to click on the text box to edit it, it just tries to make new text boxes--it doesn't seem to recognize that the text was created by fill & sign.Is there an option I'm missing? When I was initially editing the form, I had been able to click on text boxes I'd just created and edit them, this just seems to have become a problem after closing the file.

Every time I try to launch Acrobat reader from the start menu I get this message:When I browse to the folder and double click on the AcroRD32.exe icon - I get the same messageWhen try to open a .pdf file by double clicking on it - I get the message that the file can't be found - even though I can open these files within a browserAgain - I can open these pdf files (with or without acrobat?) in my browser but it doesn't seem to work independent of an HTML browserI have uninstalled and reinstalled Acrobat Reader - please don't tell me to do that and let you know how it worked - it didn'tThanksNatasha

マッチフォントを使用して日本語フォントを調べたいのですが、全く日本語フォントが表示されません。おそらくテキストオプションで日本語を選択できないためだと思うのですが、テキストオプションは「〇〇%」と表示されています。日本語選択はどのようにしたら表示されるのでしょうか？教えてください。