Adobe Premiere

Motion Graphics Not Compatible with Current Version, but Premier is Fully Updated

Hi guys, super frustrating. I am trying to drag and drop a motion graphic into my timeline, but every time I try it says that it is not compatible with my version of premiere and to update to the latest version. My Premiere and AE are both up to date.This happens with every graphic I try to pull over from the adobe stock essential graphics tab. Screenshots attached.

1825

roamsParticipant

Audio dropping out completely when using USB audio interface

my audio is cutting out on playback specifically when using my usb audio interface. The audio skips a few times and then completely stops coming through my system. In Premier I still see the levels showing like normal on the audio meter though. I have a 2023 Macbook pro M2 with 32gb ram, running on Tahoe 26.3.1 and Premier Version 26.0.2 going into a Solid State Logic SSL12 USB audio interface. The hardware has been the same for a few years now, but I think maybe this started showing up when I updated to Premier 2026. I have tried doing all the reset options as well as lowering my I/O buffer rate and insuring the correct sample rate in the audio hardware settings.

321

jason-hareInspiring

Set Track Output Channel AssignmentsOpen for Voting

Currently we can patch the Track Output Channel Assignments on a track by track basis. We select the option in the track mixer for timeline track 1 and can assign this output. Then we need to close and do it again for timeline track 2, then close and do it again for track 3, etc. It would be great to create a matrix option where all tracks can be patched in a single matrix. The rows can be for the Mix Track Channel as it currently exists, but we should have a column for each timeline track, allowing us to patch all tracks in one simple place. For users like myself setting up workflows on large sports events, with nuerous deliverables, mostly featuring a 16 track output, this would save a huge amount of time.

10925

KadeGillissParticipant

Spell Check isn't working

The spell check feature is not working. Clearly misspelled words are not showing that they are misspelled. I have disabled and re-enabled spell check in the graphics tab and that hasn’t fixed the issue either.

151

KevinCarttonParticipant

text-based editing, transcript no esta usando el idioma que asigno, aunque selecciono el idioma español, lo transcribe en ingles y no esta funcionando la parte de editar.

La funcion para editar video usando texto no esta funcionando, cuando hago la primera transcripcion se genera el texto normal, en el idioma que seleccione, cuando la quiero convertir a una descripcion para editar eliminando texto, pasan 2 cosas, o simplemente no la convierte y se borra la transcripcion, o se transcribe y cambia a ingles.

121

Jeena22389650a1hoKnown Participant

Premiere Pro Transcriptions & Captions – Advanced Workflow Questions (Multi-Audio, Fine Control, Caption Management)

I’m trying to really dial in my workflow around transcriptions and captions in Premiere Pro, and I’ve run into a bunch of questions. Some of these are pretty granular, so I’m hoping to get clarity on best practices and what’s actually possible vs. not.⸻1. Transcription Behavior with Multiple Audio Sources (Lav + Scratch Audio)In scenarios where I have: • Camera video with scratch audio • Separate lav audio layered underneath How does Premiere decide what transcription to display? • If both clips are transcribed and overlap in a sequence, what determines which transcript is shown in the Text panel? • Is it based on track priority? Clip selection? Playhead focus? • Do I need to solo a track to isolate a specific transcript? • Is there any predictable logic to this, or is it somewhat arbitrary?⸻2. Fine-Grained Control Over Transcription Timing (Word-Level Precision)I want to get extremely precise with transcription timing — down to individual words and

372

Tom ShinyParticipant

Independent Audio/Video Label Display and PositioningOpen for Voting

In the timeline, clip labels (color bars and names) are currently shared between audio and video, with limited control over how they are displayed.In many workflows, especially interviews, the visual label is useful on video clips, but adds clutter on audio clips where the waveform is the primary focus.Requested improvements:Ability to independently toggle label visibility for audio and video clips Ability to reposition labels (top or bottom of clip) Option to customize label display behavior based on track type or user preference Ability to have waveforms draw above the labels when the track height allows?This would allow cleaner timelines, better waveform visibility, and more control over how information is presented while editing.Just one more little idea or option. Thanks!

real_5081Known Participant

Is Adobe ever going to make their apps usable again?

I thought it couldn't get worse than the incompetent disaster of 2025, but then v26 came out. Is this it now? Are the apps just going to be buggy, slow and unreliable forever?

752

patrickhagotInspiring

Why every time that a project is opened PR is Relinking Media ?

I’m encountering an issue where every time I open a project in Premiere Pro, it displays the message “Relinking Media.” This problem persists regardless of whether I change the project’s path or name. I’ve tried closing the project and reopening it directly, but the issue persists. Occasionally, I need to re-open the project to make corrections for a client, and I have to wait for the “Media loading” notification to clear before I can export the rushes without encountering the same issue. I believe this is not a deliberate action by the PR team, and I would appreciate any explanation or solution to this problem.

401

Boris24127410m8eiParticipant

Frame.io extension doesn't work anymore

Hello,I've been having a problem with the Frame.io extension since today. It simply doesn't work anymore, and it's impossible to connect to the service via Premiere or After Effect.An error message appears asking you to reload the extension and restart it.Despite this, it doesn't work.Am I the only one?Thanks in advance for your help

1288211

Ian33420335oad0Participant

Lightroom for mobiles on a chromebook. Across the top there's message saying storing album locally. But it's always just doing this it never finishes. I don't use albums. What's it doing and can n I stop it. Why is it doing it non stop.

It's exactly as just described

191

editorxParticipant

Expand the functionality of Alt/Opt + Up/Down so editors can quickly bump caption segments to different subtitle tracks using only the keyboard.Open for Voting

Currently, the "Nudge Clip Selection Up/Down" keyboard shortcuts (Alt + Up/Down on Windows, Option + Up/Down on Mac) work perfectly for standard Audio and Video tracks. However, this functionality completely ignores the Subtitle/Caption track ecosystem.If an editor selects a caption segment and presses Alt + Up, nothing happens. To move a subtitle to a different caption track, editors must manually click and drag the clip with their mouse.This manual dragging introduces a significant risk of human error; it is incredibly easy to accidentally shift the clip horizontally on the timeline while dragging it up or down, instantly throwing the caption out of sync with the precise audio cues.why it matters?Accuracy and Sync Protection - Using a keyboard shortcut ensures the clip moves strictly on the Y-axis (vertically). Forcing editors to rely on the mouse to drag clips between tracks introduces the constant risk of accidentally nudging the clip on the X-axis (horizontally), which destroys t

100

bena9781905417266936Known Participant

Autosave cause problems in Production

So basically I have a film I'm editing (a big production). I have each part of the film in a 20 min sequence. It crashed at one point I opened that section up via auto save. I dragged that project into the Production. It repopulated all the footage in that one project. After using it for a bit i noticed it’s very slow and occasionally i will get a warning of low memory which will sometimes crash.I thought if i repopulated the production with footage from the previous project it will match frame back to the old location but it doesn’t. Before i re cut that whole section in a new sequence is there anything else i can do. Additionally I had a huge problem with my project on dropbox the project started to disappear. I moved it off dropbox. But now that section is always asking for a mask? I don’t have it and i’m pretty sure the problem was there before this happened.Info-I’m on a Mac Studio M4 Max, 36 GB, 2025.I’m using Adobe Premiere 26.01 (Official version)I’m using proxies exported fro

401

Adam37390392f0qeParticipant

Select/Move Curve Points with ArrowsOpen for Voting

It is difficult to make very small moves on points in curves (and color wheels). Try moving a point up or down “a hair” without it going horizontal a smidge. Seems like I should be able to select a point and use my arrow keys to move it in small increments, option_arrow to move 5-10 points, like you can with values.Also, every curve below RBG I should be able to hit Shift to keep it locked vertically if I want to move it horizontally.Can we also add a setting to add numeric values to the curve grids?

130

MakingAToZParticipating Frequently

"Add new captions segment" button should only create a segment as big as default size or up to the next caption, whichever is smallerOpen for Voting

I find I often have to add in captions because the Transcript missed dialogue or sounds that I need to add in. If I press the “Add new captions segment” + button in the Captions pane, sometimes it’s greyed out because there’s not enough space to add one before the next caption, and other times the one it creates will absorb the next caption to create one big caption, delete the text that was in that next one, and replace it with default text (this is very frustrating and I can’t see a time when this is useful).My feature request is: If there’s not enough room to put a default sized caption in the track before overriding the next one, just shrink the new caption to fill the space rather than absorbing the next one or greying out the button.

291

stevenhulmeParticipant

How to use auto reframe to follow object when zoomed in but keeping the same aspect ratio

I would like to shoot a 4k video, zoom in to make it full HD but then use auto reframe (or other means) on premier pro to follow the object. Auto reframe appears to work well when going from 16:9 to other aspect ratios but not when keeping the same ratio and zooming in. Is this even possible?

35502

AndrewTheGreatKnown Participant

HOW TO? Feathered blur using Compound blur effect

I’m trying to make an effect of a sound wave. There’s a guy in the center of the screen and when he yells, there are air-distorting waves coming out of his mouth at a high frequency. Something like this:To create this effect I’m using a combination of animated stroked circles (graphics layer) of a black color and a compound blur targeted on this graphics layer. The problem I need to fix is make the strokes feathered. I tried the compound blur settings (there’s a feather), 2 rounded crops on a black solid (one - inverted, both feathered, blur to blur the stroke. Nothing makes the circles have soft edges. Any ideas? Maybe a different technique?No AE. NO AE.

302

joe.unsworthKnown Participant

Align Auto-Captions to Existing Timeline CutsOpen for Voting

Auto-transcribe and the creation of captions from these transcriptions are great features - but, I find myself spending a lot of time tidying up the way captions get split up, and then tweaking how they have been cut against the timeline. Point 1: I often need to combine many captions after they've been generated from a transcript. Premiere will often split a sentence up into 3 or more separate captions, and I have to manually 'combine' them afterwards, despite setting the max 72 characters, and 6 second duration (single line) in the caption window. Perhaps we could have the option to have a higher character count in this panel to begin with? Point 2: I spend a lot of time adjusting the captions to fit in with existing cuts in the timeline. Oftentimes, the auto-generated captions will cut from one to the next, anywhere from 1-10 frames either side of an existing cut in the video clips in my sequence - This is jarring for the viewer, as the scene changes and then 5-10 frames l

5864

dawsoncarrollParticipant

Captions lining up with clip editsOpen for Voting

Every time I use the automated captions within Premiere I go in and line up the captions with the cuts that I've made to the clips. When the captions aren't lined up with the cuts it feels jarring when watching the playback. Wouldn't it be amazing if the captions just snapped to the edits automatically?

911

MFalkenParticipant

Audio issues with ASIO

I use a USB ported Rode NT1 & AI-1 setup. I do have it plugged into my more powerful usb port and have already checked that the mic is working perfectly fine in ever other app except Adobe. It will only recognize my mic after i added the Asio option for Audio hardware. But I noticed, if i click out of premier pro to go watch a youtube video, then com back. The mic and headphones no longer work, so I have to go into Audio Hardware, select a different device class, then re-select Asio and press OK, then it recognizes it again. However, I’ll be recording audio just fine, then mid way throw the audio randomly peaks, as if i had a bad cable connection. But I have already tested that, and indeed it is just Premier pro that I experience this in. Closing the app and re-opening fixes is temporarily, but eventually it does it again. I have not had this issue two weeks ago when i used the app so it seems to be a new issue.

392

HarshManParticipant

I would like to request native Telugu speech-to-text transcription support in Adobe Premiere Pro.Open for Voting

Feature Request: Telugu Speech-to-Text Transcription in Premiere ProI would like to request native Telugu speech-to-text transcription support in Adobe Premiere Pro.Currently, Telugu is not available as a transcription language in the Speech-to-Text feature. This creates a significant gap in my editing workflow, as I regularly create content in Telugu and rely heavily on captions for accessibility and audience engagement.At the moment, I am forced to use external AI tools to generate Telugu subtitles and then import them back into Premiere Pro as SRT files. This breaks the workflow, increases editing time, and reduces overall efficiency. It also feels limiting as a paying subscriber, since AI-powered features are expected to streamline the editing process within the software itself.India has a rapidly growing creator ecosystem, and Telugu is one of the most widely spoken languages. Providing native support for Telugu transcription would not only improve productivity for existing users

卢琦皓Participant

Dark mode Light mode Follows the systemOpen for Voting

Dark mode and light mode follow the system, just like in Creative Cloud and Acrobat client applications.

northpointm26522554Participant

I think I'm experiencing a bug with the step forward/back hotkeys and a specific binding. Looking for second opinions.

Hey all! I'm experiencing a really weird quirk in Premiere that I think might be a bug? Looking to see if others can confirm it as a bug, or show me a fix. For 4 years, I've used a keybind system in Premiere that incorporates custom mapping for the thumb-side buttons of my mouse. I currently use a Logitech Mx Master 4, but this has worked across various mice and mapping softwares. Using the "Logi Options+" software, I have ( = ) bound to the front thumb-side button, and ( - ) bound to the back thumb-side button (shown in an attached image). I use these to zoom in ( = ), and out ( - ). I also use modifier keys with these buttons for different commands. These modifier mappings are as such: ( Cmmd ) + ( = ) : Step Back 1 Frame*( Cmmd ) + ( - ) : Step Forward 1 Frame*( Cmmd ) + ( Shift ) + ( = ) : Step Back 5 Frames( Cmmd ) + ( Shift ) + ( - ) : Step Forward 5 Frames( Option ) + ( = ) : Nudge Clip Selection Left 1 Frame( Option ) + ( - ) : Nudge Clip Selection Right 1 Frame( Option ) + (S

200

19 days ago

Calgary_VideoAudioTechParticipant

Premiere Pro 2025 is taking forever Relinking media every time its opened

Before updating to Premiere Pro 2025 Version (25.3),  2024 was working perfect and never had this issue. ever since the update I'm struggling with this issue. I stopped the "Generating Peak file"  thinking it would help. But Still every time its reopened its stuck doing the same.     

13447

19 days ago

Tom ShinyParticipant