Audition

Hi all,  Can anyone recommend any tweaks which are available on Audtion to make vinyl files sound more livelier? I have recorded several mono 45s which are only available in stereo on CD. All clicks and surface noise etc. has been cleaned up but they sound a tiny bit flat. Are there any tweaks on Audition to make them sound a bit brighter or similar to CD sounding quality? Any advice would be greatly appreciated in advance. Thanks, Paul.

Hi I have a 40 minute podcast episode almost finished, had to postpone it for a few weeks, re-opened just now and ALL 62 FILES ARE OFFLINE.  I went to Link Media, and nothing is turning up -- similarly-named files, but not the ones Link Files is looking for.   I noted one oddity (see screenshot):    apparently I saved the file in the wrong project folder.  It went into the Thanksgiving folder, which was a previous episode.  I am guessing that the .sesx file is now in a different file from its source files.  Also, although all the files are missing, I notice the timeline has all the colors for each track still there... Any suggestions for a fix?  If I save the project in the correct folder with its source files, will that work? Thanks for any help, and Happy Holidays. RobMac Studio Apple M1 ChipMemory 64 gbRunning Tahoe 26.3 Audition 25.06.0.97 Build 

I uploaded one 30 minute file of audio and it enhanced it perfectly, as usual. I then Uploaded a second, accidentally adding it to the same project. Now that 60 minue project is all enhanced as usual too. But since I can't download more than 30 minutes with my current plan (or lack of), I uploaded again as a second project with just the second 30 minute file. Despite toggling on that voice enhance option in the filters, the audio is still the original. I tried again two more times over two days. The only version that's enhanced is part of that first 60 minute file. What could be the problem?

Normally when I need to work with audio I work in Logic Pro. But I just installed Audition to try it out. Can someone explain to me why Adobe decided to make horizontal zooming with Command + mouse wheel instead of Option + mouse wheel like in Premiere and AE? Is this to confuse the user? Once you get used to one standard and it works, Audition says "Now you need to get used to COMMANDS". And then when you go back to editing video you have to use Option again. Did you really need to use different keys for the same function? It seems like the staff didn't agree among themselves and randomly assigned different ways.The same goes for Photoshop. Holding down the mouse wheel in Premiere and AE allows you to move the preview monitor. But in Photoshop it should be different. - space. WHAT is going on here?As a new user, I see this mess. But, apparently, the "old school" is already used to this and will be against changes, so that one function is performed the same in all programs, and not dif

I want to hear the metronome only when recording. I do not want it to play during playback. Is there a setting for this? I am on the lastest version.

Hi everyone. Here is my question. I'm not sure if it is a bug or what is going on.When I try to export a mixdown in Audition 2025 or 2024 I get this strange repeating sound on the final file.You can hear it in the attached 2025 file. When using Audition 2023 I have no issues.Has anybody had this issue before?I'm not sure if it is how Audition is handling the effects in the multitrack or if this a bug.It plays fine in the DAW.I would prefer to use the latest edition Audition obviously and that is why I am asking this question.I am using Windows 11.Thanks very much for any ideas,Todd K. 

I am editing a 40 minute podcast with many cuts, and I had to set it aside for a few weeks.  When I went to open it, the sesx file is there, all the tracks have their colors, waveform seems to be there (although exporting them did not work -- wrong files) and the Multitrack is just dotted lines amid black space; the alert says 51 of 69 files could not be found.  Link Media is not finding anything.  I've tried Time Machine, same problems.... any help?I am working in Audition version 25.6.0.97, on a Mac Studio, Apple M1 Max, 64gb memory, running Tahoe 26.3.  There was at least one Mac upgrade since the last time I opened the project. Thanks, and Happy Holidays.  Rob

So basically I'm a starter at Adobe Audition and edited an entire podcast with the host and the interviewer as a stereo file. I found how to separate it to mono just after I finished the edition, but is there a way to do it on a stero file that I already edited? Or do I need to restart and re-do it from scratch? Any support?

Apologies if this has been covered before but I'm pulling my hair out here.  I've a decent enough specced machine: AMD5950x, 128GB RAM, Win 11, 3xSSD 1xHDD, MOTU M2 Interface. Running latest version of Audition. I produce and edit podcasts. Currently working on one which is in a radio documentary format i.e. using short clips from multiple contributors, tied together by a narration, and with music added in places.Because the interviewees were recorded in a mix of in-person and online, audio quality varies considerably, so I want each person on their own track so I can process them individually. Clips are only 20-60 secs each. I'm 5 mins into the first episode, have 17 tracks on the go, and whatever audio hardware settings I use (MOTU ASIO, MME etc.) even with all the effects powered off on every track, I get loads of crackling on playback. I've tried all the obvious e.g. experimenting with latency, ensuring everything is the same sample rate, etc., but I can't elimi

Hi everyone. I used Audition to extract songs from several CDs to create a playlist. Since the songs are extracted from different CDs, it's natural that they have different volumes. I'd like to know how to use Match Loudness to level all the songs so that they are heard at the same volume. Or, is there another way in Audition to level all the songs.

Aloha!tl;drI want to use Audition to clean the audio for a short film, and the workflow isn't working. I've got a short film teetering on the point between rough and fine cut, so I'm ready to start getting serious about audio. I want to do most of the initial work (noise removal, spectral repair, normalization) in Audition. If I right-click on a clip in the Timeline and say "Edit in Audition," it opens that instance in Audition, and when I save changes they cascade back to Premiere. A new clip appears both on the Timeline and in the Project as "File_Extracted." Ok, fine, but... Most of these audio clips are used multiple times, with separate in and out points. What I want it to edit the source clip, and have those changes cascade into the project. I don't want to manually do the same noise correction on five sections of the same clip. If I right-click on the audio file in the Project bin, and hit "Edit in Audition," it opens in Audition. Any changes I make and save

Is there a way to direct SAVE AS and EXPORT as two different ways?  For example, I save a file twice,  once for the station I am currently working at for Wide Orbit.  So it does the IMPORT path and the Wide Orbit file type.   But I also want to save it as an MP3 in a google drive, for use on another station that I voice track for, that isn't Wide orbit.    When i click export or save as, they adopt the last way saved.... I'd like for Save As to do the MP3 way and EXPORT to go to Wide Orbit so I'm not taking a lot of extra time clicking on the two fields each time... sounds like a minor problem, but when i'm doing 15 to 20 tracks a day its TIME CONSUMING and mind numbing...    Just checking for a better, time saving, solution.    

Currently, if I select Extract Audio from CD, ALL of the tracks are checked for extraction by default. I rarely extract more than one track from a CD, so have to uncheck up to 24 or more tracks individually. It would be helpful if there were an "Uncheck All" option, or the default were all unchecked with a "Check All" option and that seems like a relatively simple coding feature. Then again, maybe that's an option that I'm just not seeing. Thanks for any response.

My sound level only shows to -60dB. How do I get it to show down to -70?

When Spectrally deleting or even muting waveform audio in the Spectral Frequency Display window, instead of a clean removal, it will semi regularly cause a digital audio artifact/click at the very start of where the selection occurred. This is frustrating because there's no way to remove the click as trying to do so just creates more of these. I've tried changing both the Smooth delete/cut boundaries and all edit boundaries from 5ms to everything possible but that doesn't make a difference either.   I feel it's a bug because if instead of deleting or muting you Deamplify the same audio by like -99 db, it doesn't happen.   MacOS 15.7.1 (24G231) and Audition 25.6, but this issue has been present for many versions.             

Hi everyone, We're excited to announce a new Adobe Community experience is coming this January. A little bit about the update:The new experience will be simpler to navigate, make it easier to connect with other creatives and Adobe experts, and will give you clearer ways to share feature ideas, enhancement requests, and bug reports—with greater visibility into their status with our product teams. In the meantime: Adobe Community will remain active. Keep using it as usual—there will be no interruption in access. In fact, you’ll notice even more Adobe Experts on deck to provide faster responses before, during, and after the update. No existing content will be lost in the update. Every single post, reply, solution, feature request, and bug report you’ve made will be transferred to the new experience. You won't need to recreate anything. Existing content will reappear in two phases. When we launch the new community, all posts created on or before November 16 will be there from day one. Aft

Hello! Anyone Know how to fix this? I got a error for audition  telling me to save and then close audition. So i did that, but when i reopend my file the below occured, Audition clearly is showing something was recorded but the frequency view has nothing. When I play the section where there is nothing its silent until the section where the spectral view is showing. Any ideas on how i can restore?

Hi guys -  I am having trouble making an Aggregate Device (Mac Midi setup) work in audition. I can get either element work (and I'm pretty sure if I use the aggregate device I can work one of them through the system), but I have a Rockville Mixer and a Blue Yeti Mic and I can't get both of them to come through at the same time. If anyone has any input as to how to work the settings (most likely the Audio MIDI Setup) to get both of these elements to come through at the same time so I can play things from the mixer and the mic, it would be geratly appreciated. Feel free to work through anything you think may be effecting this in Audition but I am fairly certain that the problem is either in the MIDI setup or the Sound settings on Mac. Thanks,Rob

I made some edits to an interview, to try and get the background noise out of the clip. I'm making the video in Premiere Pro, and right clicked the audio -> edit clip in adobe audition. Then, in Audition, I did Effects -> Noise Reduction / Restoration -> Noise Reduction (Process). After that, I saved my work in Audition, and quit the program.  The edits I made didn't sound great, so I want to revert my audio back to it's original form, taking all of my adobe audition edits out of it. How do I do this? Essentially, I messed up and want to start from square 1.

Hi all! I have Windows 11, Audition 2025, and a Roland Rubix 24. Unfortunately, audio playback is faulty when using the ASIO drivers due to problems. It seems to be the typical issue with the sample rate.I also have an older version of Audition CS4 on the system. With the same hardware settings in both versions, the identical files play back without any problems en CS4.  Does Audition 2025 have a bug with ASIO under Windows 11? Is there anything I can do? Meanwhile I deinstalled Audition 2025 and installed it again. Now at least the MME-drivers work again and it seams without problems with the sample rate of the files. But again: How is it posible, that CS4 doesn't have this issues with Asio? Best regards!Hans   

I created a .wav file in Audition 2025, converted to AAC there (1) and also (2) in Apple Garage Band, but NOTHING permits a successful import into Apple Music. Involved Apple tech support for 2 hours, resulting in their belief that something in the original Audition file (a codec?) in Adobe is not compatible with an Apple Music import. Would value any solution or ideas towards one. Thanks. 

i have set up everyting and i still can't get audition to recongize my microphone.  Is there a trick to this?

Hi!I am using the latest version of Audition and I am trying to have it record (and playback) sound from my system and a Rockville RockMix 6FX mixer. I have downloaded Blackhole and can hear and record the audio from both, but there is a massive echo. From what I have read I am recording both the sound going out and the sound coming in. I'm hopeful that there is a way to resolve this, as I need to hear all the elements (it's for a podcast and the guest will be connected via the Mac running audition, I need the mixer for multiple elements (microphone, another computer for sound, etc.) and need to be able to hear playback of the recording through the computer so I can hear the person speaking over my computer. The reason I can't run everything from the Mac is that I am also using video and need to capture the screen to get the video of the guests. Any help would be much appreciated! Thanks. 

As the title indicates, using ctrl k cuts all the tracks in multitrack view. How can I use a shortcut to cut only one track and not all of them?

I need to use some of the favorites effects to apply to elements currently being edited together in the multitrack views. These elements are not whole tracks, but just parts of a single file split into multiple parts. I only want to apply the effect to one part, aka element.I tried pasting the element to a single track in waveform view, but that does not work either. How do I do this?