Bug Reports

Após fazer a transcrição do vídeo, busco as pausas para eliminá-las.As pausas pequenas não são identificadas e não é possível excluir, pois não foram identificadas como pausa na transcrição da sequencia. Por isso, não é possível eliminar conforme podem identificar na imagem em anexo. Busquei alguma informação sobre esse erro e não encontrei.  Como podem identificar na imagem. Há duas pausas na timeline. Na área de transcript não identifica o espaço vazio como pausa na fala.  Se alguém puder me ajudar. 

Hi Adobe Team,I’ve run into a significant performance issue with the new Premiere Pro 2026 (v26.0.1) regarding media relinking over SMB, which seems to be a clear regression compared to the 2025 (2025.6.4) version.The IssueIn Premiere Pro 2025, the initial relink/indexing of a large project (multiple TBs) takes some time, but once the metadata is cached, subsequent launches are fast, but still takes some unnecessary time. In Premiere Pro 2026, this "warm-up" benefit is gone. Every single time I open the project, Premiere spends the same full duration relinking and scanning the media. It’s as if the application is failing to commit the file-path metadata to the local cache or is forcing a deep re-scan on every launch, regardless of whether the files have moved.My SetupI’ve tested this thoroughly on a high-end setup to rule out hardware bottlenecks: Clients: New Mac Studio M4 Max (14/40-cores), 128GB RAM. Network: 10GbE to clients, 100GbE uplink to the switch. Configuration: MTU 9000

Hello Adobe Devs and Community, On a recent project my team and I discovered a bug that was incredibly disruptive to our workflow. Brief background - the project was a conference style presentation with heavy use of picture-in-picture design. We encountered this issue in our workflow when executing some of these picture-in-picture looks with 4K footage. Issue - Our sequences are set to 1920x1080 at 29.97p (framerate doesn't seem to impact this bug as far as my tests can tell). We were placing footage of the presenters on top of a motion background. Most of our footage was 1920x1080 to match our sequence size, for these we simply scaled the footage down to the picture-in-picture design spec and everything worked fine. The problem arose with footage that was shot on-location using Sony FX3's at 3840x2160 29.97p. To work with the 4K footage, when bringing the clips into our sequences we would utilize the "scale to frame size" toggle to conform them to 1080. This allowed us to us

If I leave Lumetri Scope open (typically with RGB Parade and Waveform on 'float') over night then I will return to a "You have run out of system memory" OS arror. Premiere will have consumed 300+GB of memory. Premiere will show as "Paused". There is a 'resume' button, but it does not work even long enough to save or quit Premiere. The only solution is to force quit Premiere.  Steps attempted to resolve:-- Remember to close the Lumetri panel - WORKS-- Trash preferences (including dissabling the Creative Cloud sync) and cache - ERROR-- Restart Mac / Reset Mac Pram etc - ERROR-- Disable non-Adope plugins - ERROR Steps to confirm:-- Restart everything / Creat new, empty Premiere project / Add one h264 video file, open Scopes / Leave overnight - ERROR-- Same as above but with ProRes 444 - ERROR MacPro 2019OS : 12.5 MontereyCPU: 3.2 GHz 16-Core Intel Xeon WRAM: 192 GB 2933 MHz DDR4GPU: 2x AMD Radeon Pro W5700X 16 GB

In PR 2026, when creating a karaoke video by syncing lyrics to a video track, the Program Monitor displays a split-screen view as shown in the image, and I can’t turn it off.I need the video to be displayed in the center of the screen in single-screen mode, without the multi-screen comparison shown in the image.Premiere Version: PR 2026.0.0 Operating System: WIN11 25H2I’m currently working on a music video that already has lyrics, and I’m adding Japanese kana pronunciation guides to the kanji. Therefore, I cannot work in split-screen mode.Previously, dragging any track on the timeline would cause the Program Monitor to display normally in single-screen mode. I’m not sure what I did to cause it to switch to the split-screen effect shown in the image. Then, to disable the split screen, I followed an online tutorial and turned off “Composite Preview During Trimming,” but this resulted in a black screen. I spent nearly two hours searching online for tutorials, but none of them worked. I ha

Steps to reproduce:Enable "Toggle Multi-Camera View"Start Playback (Press Space)Ripple Trim (Press Q) (The bug may occur after ripple triming twice) Current behavior:The playhead is still moving from its original position. Predicted behavior:Just as with ripple triming with multicam disabled, playback should stop, and the playhead will reset to the beginning of the clip (where it's trimmed). Can be reproduced on:Version 24.5.0 (macOS 15.1.1)Version 24.6.3 (Windows 11)

I am experiencing a critical issue with Adobe Premiere Pro 26.0.1 on Mac M5. The speech-to-text transcription feature produces entirely inaccurate results. Even with very clear audio, the transcript does not reflect what is said in the video. For a 2-minute video, the transcription output is completely wrong and unusable. Audio files and everything else are the right ones and there is nothing wrong with them, double checked;)

I am experiencing a persistent issue with the Speech-to-Text / Auto-Transcribe feature in Premiere Pro (v26.3.2 / v27.0). When attempting to transcribe sequence audio (or clip source audio), the generated transcription result yields garbled, repetitive symbols and incomplete character strings (e.g., [—] Y [—] \ \a – [—], De la de– | a – [a – | \b – [de–] ...) instead of proper text transcriptions.Troubleshooting Steps Already Attempted: Verified and configured language preferences in Creative Cloud Desktop as well as Premiere Pro Preferences (Preferences > Audio & Transcript / Transcription). Confirmed language pack setting is set to Spanish and enabled "Transcribe clips automatically". Verified that the active sequence timeline and audio tracks containing dialog are selected, unmuted, and functioning properly. Triggered "Transcribe Sequence" and "Re-transcribe Sequence" manually via the Text panel's action menu, isolating the active audio track. Tested across multiple p

Like I said, I click on “Effects” but it is no longer Effects, but identical to “Color.” I can no longer do audio transitions, video transitions, etc.

I am trying to export video from premiere pro into my youtube account.  I click the youtube tab, open the buttons. My screen tells me to log onto my youtube account. I open creative cloud, click on my name, shows I’m connected but when I return to premiere, it doesn’t show me as signed in. 

Issue: Double clicking on program monitor doesn’t switch the selection if you already have a selection. Steps to Reproduce: Try to double click on program monitor while another clip is selected. Expected Result: It should switch the selection Actual Result: It doesn’t select Premiere Version: 26.2 Build 65 Operating System: Windows 11 Pro 25H2 GPU Driver (Windows only): 597.79 Studio Driver Video Format: It happens with every layer. (Images, videos, gifs etc.)  

Issue:The Export workspace in Adobe Premiere Pro turns black and the application becomes unusable when GPU Accelerated UI Rendering is enabled.Steps to reproduce:Open Premiere Pro. Go to Preferences > General and enable GPU Accelerated UI Rendering. Restart Premiere Pro. Open any project, including a brand-new project with a short video clip. Open the Export workspace.Actual result:The Export workspace becomes almost entirely black and Premiere freezes/becomes unusable.Expected result:The Export workspace should load normally.Confirmed workaround:Go to Preferences > General, disable GPU Accelerated UI Rendering, restart Premiere Pro, and open Export again. The Export workspace then loads normally and exporting works.Reproducibility:The issue was reproduced in Premiere Pro 26.3.x and Premiere Pro 26.2.2, including in a brand-new project.System:Windows 11 Pro 25H2Intel Core i5-10400F32 GB RAMNVIDIA GeForce GTX 1060 6 GBNVIDIA Studio Driver 581.57WDDM 3.2Mercury Playback Engine GPU

I tried to transcribe a sequence and keep getting the no dialogue found error. The audio is at a good volume and it is very clean as I used the adobe podcast tool. I select the audio in my timeline go to the text window and select transcribe sequence. I get the no dialogue found error. I tried it again on a sequence where I had successfully transcribed and added captions. I received the error again. I uninstalled and reinstalled premiere pro and still have the issue. Also tried changing the sound to mono. No luck.

Adobe Premiere version 22.5macOS Monterey 12.0.1 I'm importing clips from multiple show titles, and on my harddrive I have clips from each title organized into Folders in Finder, but when I Import the folders, any folders with out multiple clips don't import as Bins. If there is one clip in the folder, only that clip imports, without a bin, and if there's nothing in the folder, nothing happens at all. This is not how it used to work, and I'm wondering if it's a bug. I would like to maintain the same file structure in Premiere that I'm using in Finder, plus if/when I get new clips from these titles, I'd like them to have an existing bin to be imported to. Having to go through and recreate these bins seems like an unneccesary step.

Hello community,  I'm trying to export my project, and it gives me error -1609629695.I learned from another discussion that I have to change the GPU settings from File > General The issue is that it's impossible to change, as seen in the photo below.I'm using a Mac. Please Help 

The bane of many an editor. I encounter this bug at least once a day. If this happens in the middle of a render, the entire thing fails. (Thank Adobe for smart rendering, at least!)The best workaround I've been able to come up with, is to ALWAYS render timeline previews. I use cineform, and so the final, smart render, is very fast.Here is a long forum thread about it. This bug has been a problem for many years: https://forums.adobe.com/thread/2171535This is Unique ID 160 on my Premiere problems spreadsheet: https://docs.google.com/spreadsheets/d/1dVJb7kI_ZETLavrplfARgn9gL8HUpvkq6A0jCPxqA3w/edit#gid=1133868629

SEARCH/FIND/BIN NOT WORKING!After the update to Premiere Pro CC 13.0.2 (on a Macbook Pro running OS 10.13.6) I started having issues with the project panel bin filter search not showing clips that I knew were in the project - I'd search for a word in the name of a clip and no clips would show up. I tried using the Cmd-F tool instead, and Premiere would either find nothing or stall out and rainbow wheel. Creating a search bin also failed to work properly - I'd create one to search for a word that was in the name or description of dozens of clips, and the search bin would remain empty. I tried multiple solutions discussed in this thread about CC 2018: Premiere Pro CC 2018 Doesn't seem to be able to search the Project Panel . I trashed preferences, deleted the media cache and database, uninstalled and reinstalled the software, and tried the lock project trick. I still saw the same behavior. Tried starting a brand new project containing only 4 clips. In one case, 2 of these clips contained

I’ve got a vertical video I went to add into a sequence. Originally, I duplicated my original sequence (a different iteration of the video, no major differences), deleted the old clips, and then added in the new video. When I pulled it into the sequence, the audio only played back out of my left channel. I tried a fill right with left - no go. I tried panning the audio - no go. Note, I have data in the left and right channels on my clip. It’s just only playing one. I created a brand new sequence, and pulled in a clip, and told it to match to clip settings. Same problem - only the left channel was playing back. At this point, I’ve checked all my sequence settings to make sure they’re correct, double checked the audio settings on the clip to be stereo and mapped properly, and checked my headphones. The clip plays fine in the preview window. I also tried to remap my data channels to play both out of the right channel, and even that didn’t change anything. Still out of the left channel onl

There’s no Project Window panel, and I can’t access my bins. Even after resetting the workspaces, the Project Window still doesn't appear.

when i press the locate button in the link media dialogue and press search, it tries to suggest a clip that is totally the wrong name thent he clips its supposed to be searching for.  Premiere 2025  version 25.6.6 (build 5). mac os tahoe. (then i used syncalia to sync something for me, and i imported the XML into premiere and every single clip was offline. not sure if thats premieres fault or syncalia but ive never had an XML come into premiere as offline. this isnt normal) 

It is neccessary to manually alter the language for Transcriptions every time when attempting to transcribe a sequence. Within Media Analysis & Transcrption Settings language is set to English (UK)Select a sequence with Voice included and choose Transcribe from the Text panelExpand the view from the 'Generate static transcript'Language set as incorrect English When attempting to transcribe source media, on the other hand, the correct set language (English UK) is selected.  Additionally, after opening the 'Create transcription for source media', if you cancel this view, select the sequence and then choose to Transcribe, the language is now selected as English (UK). If you subsequently create a transcript with the chosen language, English (UK), close Premiere Pro and re-open it, attempting to re-transcribe the sequence is back as the incorrect English again. The same occurs when attempting to use the Auto Language option.  OS Locale is only obeyed when a

issue: selecting Browse or Custom in the Creative section of the Lumetri panel is broken.   how to replicate the issue: open Lumetri panel, navigate to Creative section, next to Look open the drop down menu and click Browse. For me, this doesn't open up the file explorer window to find my LUT file, it simply loads the SL NOIR TRI-X lut for some reason. Manually selecting other LUTs from the drop down menu, and selecting None all work fine. It's only when selecting Browse or Custom that this happens.   version: 25.2.1 build 2 (also happened with the version immediately before this one)   OS: windows 10 home Build 19045.5608

Issue – I've been working on a number of longer projects recently and I'm noticing that everytime I open the projects, the IN and OUT points that I had set on my sequences have randomly moved. Sometimes the IN point will be a few seconds later. Sometimes the OUT point will be a few seconds earlier. The duration of the jump is never the same each time.  Steps to reproduce – I have a slate at the start of all my sequences, which we use to make internal notes and caveats when providing WIPS to client. When reviewing internally, we don't need to use these, so I set an IN point on the sequence at the begining of the edit proper. And an OUT point on the final frame. These points do not move while we're working on the edit. I'll save the project for the day, and the next day when I open the project, one or both of these IN/OUT points has moved a few seconds and I'll have to re-set them.Expected result – IN/OUT points should not be moving unless I've moved th

Description:In previous versions of Premiere Pro (such as 2024), using a custom shortcut assigned to the “Send to Adobe Media Encoder” command respected the In and Out points set on the timeline. However, in Premiere Pro 2025, this behavior has changed.Now, when I use that shortcut, Premiere sends the entire work area to Media Encoder — even if the work area is disabled — and completely ignores the In and Out points. This breaks a key part of my workflow, where I quickly mark In/Out and send just that range to export.Currently, I’m forced to use the manual export dialog (Ctrl+M) to ensure the In/Out range is respected, which adds unnecessary steps.Steps to reproduce:Mark In (I) and Out (O) points on a sequence.Use a custom shortcut assigned to “Send to Adobe Media Encoder.”Media Encoder opens the task with the "work area range" setting instead of "In/Out source".Expected behavior:The export should respect the In/Out points marked in the sequence — as it di