Photoshop

I've been looking all over this forum for a solution, so please forgive me if I missed it.I don't use tabs. My workflow requires separate windows for each image. When I open images, the window will resize to the image for the first 3. If I open more, the window will fill the screen while the image remains the same size. I need to be able to see the tabs cascade so I can find my frame numbers without scrolling through a dropdown menu. In CS6, it was automatic. I have unchecked 'overscroll'. I've attached an image in case I'm not using the correct terminology to explain my problem. There's probalby something obvious that I'm missing. This issue also hides my tool bar until I drag the windows to snap them to the edge of their images to unbury it. My workflow has been negatively impacted by this issue. Thank you for any suggestions.

Hello,I have a model car that needs decals. The decal does not exist, so I have to create it.The decal is a scanned PDF file.If I print the PDF at the original size, the decal size is perfect.I only need the black lines from the decal image (not the blue, orange or black and white, only the black lines from the decal image) As the PDF was scanned, there are no printer margins. I therefore have to move the image into the printable area, as it is currently on the edge.I also need to print the black lines five times, as it can fit on A4 paper and I do not want to waste decal printer paper.I am a beginner with Adobe.Could someone please help me? What do I need to do? If any part of what I wrote is unclear, please ask. Thank you.

How do I remove these + signs appearing out of nowhere? It appeared suddenly and I thought I accidently typed it but it kept appearing and is only visible when the layer is on.

Hi, Thanks to everyone who took the time to put forward an image in our previous 'Electric Avenue' challenge. The imagination in this group is excellent.This week we have different challenge. Cellphone masts appear everywhere these days and sometimes they are bare masts but occasionally the cellphone companies disguise them with a few tree tree branches or similar. I got to thinking that the collective imagination around here could do better than that. So I bring you a undisguised mast, actually it is an an Adobe 3D asset that I textured, rendered, and added to a photograph of some trees near Loch Morlich in Scotland. How will you cunningly disguise it?For this week can I add an additional request, when you post your response can you add just a few words on how you went about it. It may help others see the potential of different approaches, software, and tools to such a challenge. The “rules”: Use the starter image as at least part of your own image entry. Anything goes, as long as it

débutant sur Photoshop je rencontre un petit problème qui doit avoir forcément une solution.Dans certains cas, le ciel est mal détecté, notamment à travers un feuillage dense. J'ai ce problème sur d'anciennes photos Jpeg (je n'utilisais pas les raw à l'époque).  Comme je cherche à remplacer le ciel avec les hautes lumières cramées par l'option "remplacement du ciel", Photoshop ne me détecte qu'une partie du ciel et le ciel généré ne semble pas modifiable directement. Y a t'il une solution pas trop compliquée ?

 Convert Image into Dots

Hi everyone,Has anyone here ever been asked by a printing house not to use the LZW TIFF format?I have to say, LZW compression has always been incredibly useful for me when working with billboard or large banner files, and until a recent request from a print shop, I’d never heard of any issues with using it for print.I haven’t yet received an explanation from them, so I’ve been digging through forums trying to understand what the potential problems might be. Unfortunately, I’ve found very little—just a few hints suggesting that some RIPs may not fully support LZW, which could lead to major issues when interpreting the file.If anyone would be willing to share their experience on this topic, I’d really appreciate it.What exactly causes the issue? Is it something that happens often, or could it just be outdated software on the print shop’s end?Maybe most printing houses just re-save LZW TIFFs before printing, without informing the designer?Thanks in advance for any insights!

For some reason every time I open the color balance window now it opens up with my most recently used settings, which are literally always wrong for each new image I wish to adjust. I assume some setting was accidently set somewhere to cause this. Where is it, and how do I change it back?

I want to sharpen a Layer and watched PHLEARN's video on youtube which used this worfklow: 1.  Dup layer2.  Desaturate the layer3. Make the layer a Smart Object4. Change Blend mode from Normal to Overlay5. Go to Filter, Other, High Pass, adjust slider6.  Create Layer Mask.  Fill with Black7.  Paint with White to reveal sharpened areas. Screen shot 1 shows how things look after the first step, duping the Layer.  Screen shot 2 shows at step 3, after desaturating the Layer and making it a Smart Object.  Screen shot 3 shows after the blending change., and screen shot 4 shows at step 5, after creating the High Pass Filter.     My questions are: - why is the SO Layer so dark in screen shot 3?  -  is this a referred method of sharpening?  The PHLEARN guy said he liked it better than using the Sharpen tool.   Before and after shots in screen shots 5 & 6.  I guess it's better but th

Hi there, I couple weeks ago got a new MacBook Pro and have encountered an error when using Photoshop.I'll get a "Could not complete the Export As command because of a program error" error when I tried to export images whether it's on the canvas or on artboard(s).Our IT guys checked on my system but they seems not able to fix it.We've also tried almost every possible ways that we can find, including update to the newest version, downgrade to the previous version, delete preference settings, disable graphic card driver, checking the permission to access disk, and so on, but none of them work.So I'm wondering if has there anyone encountered the same issue? Down below I've attached the snapshots of the error message and the info of my laptop.Thank you. Terry 

ちょっとしたことですが、特定色域の選択のインターフェイスがつい最近のアップデート(26.9.0)で変わったようです。補色とグラデーションになったことが自分には使いづらいです。元のインターフェイスに戻す方法はないでしょうか？ 

Hola, en cuantos equipos personales puedi instalar Photoshop? Muchas gracias. 

I have been a user of Adobe products for like 3 decades I think. This is the WORSE release I have EVER worked with.    I'm not sure what is going on at Adobe [cursing removed]! It is SUPER SLOW now, several changes in the way you do things now that have been the same for decades, crashes all the time, if you open a file from my network share though PS it locks the whole laptop up. I'm on Mac.    I get the Gen AI add ons... But NEVER [removed by moderator] with a good thing. I LITERALLY HATE this new release and I'm considering cancelling my whole CS subscription and moving to something else.    Adobe.... PLEASE... NEVER change the way basic features work and QA your releases. I'm cool with maybe some bugs on the AI stuff... but this new PS is garbage and super buggy.   PS... FIX YOUR [removed by moderator]

I have tried going to Get Info and changing it to default to Photoshop, but the change will not hold.  Anyone have any suggestions.  It either opens up in Acrobat or Preview. Thanks! 

Every time I click 'Quick Export' or 'Export As' I'm met with an error message;Could not complete the Quick Export as PNG command because of a program error. I currently can't export any of my work. The error is present on both Photoshop 2023 and Photoshop Beta.I have updated both. Reinstalled both. The issue is still present.

Hello. I have a PC, the Windows version is 10, and I ran into a problem that is in photoshop version 26.9 (in beta version too). The problem is with an Extension button that is not working/unavailable (outdated version. Can you tell me how to solve the problem?

Having trouble figuring out how to not only cut out a subject and remove the background but also saving that subject as an individual image so I can add that to a powerpoint slide. Does anyone have any ideas?

On Photoshop, I use a thumbnail template, where I have multiple groups: Title, Talent, Products, Background. I've been using that template for years now, I clean up once in a while but I have a couple of recurring images I use and like to keep in my template. Recently, even when some layers are not checked, it's like Photoshop thinks they're there? So if I want to resize one of the images that's part of any group, I need to hit free transform in order to be able to resize this image using only this image's borders. Or when I have to have 2 images on the thumbnail from the same group, I can't move them separately, it moves both of them and I need to remove one from the group to move it and then put it back in. I don't mind if that's just the way Photoshop is going to be, I'll re-organize the template accordingly, but it's kind of annoying and it didn't use to be this way up until the latest (I'm on v26.9, on PC) update? So, am I missing a quick fix? 

mes photos (et l'interface) sont jaunes dans photoshop, Bridge etc. contairement aux visionneuses de photos disponibles avec Windows 10 proCi-joint une capture d'écran de la même photo ouverte avec la visionneuse Firefox et une autre avec photoshop , j'ai regardé partour sur internet et je n'y arrive pas! pour les réglages c'est l'enfer!Merci pour votre aide

when I updated photoshop to the latest Windows Patch 26.8..1, now my  contextual task bars are only  partially showing. I have attached a photo below. Nothing else in the environment has chganged. Is there a way to reset it or roll back to an earlier version. Anyone else having this same issue. I am running Windows 11 Pro on a Lenovo Laptop and an Ultra 7 165U processor. Suggestions and Help would be appreciated.  

Since updating to Photoshop 26.9.0 20250724.r.15 today I've got a problem with Generative Fill. I can select an area, right click on it and choose generative fill, type in a prompt and I get three variations offered - however, the prompt box is then blank and unselectable  so I can't modify the prompt or indeed even generate futher variations from the same prompt the 'Generate' button remains active, but with a blank and un-selectable prompt box.     Photoshop 26.9.0 20250724.r.15 on Windows 11 24H2 

When copy/pasting attributes from one shape layer to another, "paste attributes" isn't working. Attributes that were copied from one shape will not paste into another shape. Sometimes the option to paste doesn't even show up in the right click menu, it only allows the option to copy. This is a procedure I've done countless times, and this is the first I've encountered this issue.  26.6.0 on imac, sequoia 15.4.1

I've seen some art streams where the digital artists are zoomed in on their canvas and they have the full picture view, typically in the top left corner of the screen. I'm wondering if I can do the same, or if I just mistook that feature for another digital program? Thanks for the help!

Hi, i am having 900 + images scanned as shown in the attachment. Is there a easy script or action that would just straighten the layers. and also crop single single frames as images or sequence at a desired size or aspect ratio. pFA  

Hi, i'm literally just trying to move a gif to a still image. I've copied and pasted the frames of the gif into the still image i'm trying to paste it into, now to have the images actually be over the background.But when I select match layer across frames, the gifs are still transparent, and I end up creating a gif that flashes from background to gif 1, to gif 2, etc.How do I fix this?