Photoshop

Photoshop 2026 27.2macOS Tahoe 26.2 Photoshop does not automatically append file extension when saving. According to this help article there are supposed to be options.And those options are missing, not sure since when. Previously in version 27.1 (and macOS Tahoe 26.1), even if I deliberately remove .jpg from the filename when I save, Photoshop would append .jpg, and would ask whether to overwrite if file already exists.

In Lightroom - photo - edit in - open as layers in photoshop.I assigned “command - O” as a shortcut.After updating to the 2026 version of photoshop my shortcut still opens in photoshop 2025, which I cannot even find in my launchpad since updating.If I go through the tool bar instead of the shortcut it still opens in the 2025 version.I’d like to use the latest and greatest but I can’t get anything in there other than dragging.  Does anyone know WTF is happening?

Is L (Lightness) 0–255? Or 0–100?Searching online says the range is 0–100, but when I look at Photoshop, isn’t it usually 0–255?For A, is it green and red, or magenta? Why do different sources or regions describe it differently, with some people saying it represents red?What do positive and negative values mean?Why does a negative value represent green, while a positive value represents magenta?

Bij "Foto's ophalen van" in Bridge vanaf de Iphone lukt dat niet meer, er verschijnen geen foto’s. De iPhone wordt in feite niet herkend. Een Nikon camera bijvoorbeeld wel. Iemand een oplossing?

Every time I paste a text multiple times, the app crashed. Thought it’s from a font I installed on creative cloud but even after removing it, the app still crashed. Any idea why?

Thanks to everyone who submitted an image to our previous ‘Move Closer’ challenge. This week we start with a straight razor, a popular shaving tool until the safety razor came out although some still use the straight razor today. What will you make from this object? Will you incorporate it in a scene or make something completely new from it? Please add a few words with your image describing how you went about it, it may help others and it is always good to see alternative approaches. The “rules”:Use the starter image as at least part of your own image entry. Anything goes, as long as it meets the forum rules on decency, copyright, etc. Anyone, and everyone, is welcome to have a go, whether you are a complete beginner or a Photoshop expert. This is not just for our forum “regulars”. The challenge is not limited to Photoshop. Any Adobe software can be used.  There are no prizes apart from the chance to practice, show off your skills, or bring a bit of humor and fun. Don't be shy, join in

When I'm typing a line of text, if I have punctuation at the end of the line it moves it to the beginning of the line. I'm using CS6.

Everytime I try and open a file saved from photoshop, it doesn’t let me, and keeps giving me the error in the image. It happens when I try and open from my Adobe Cloud AND from my files on my laptop saved from photoshop. The button “Learn how to fix” is not useful and isn’t helping me fix the issue. I’ve tried restarting my laptop, using an older version of photoshop, uninstalling and re-installing the latest photoshop updates, and using the web version, but no luck.

I downloaded the latest version of Photoshop for work the other day, and I am unable to even create a new blank template without the entire program crashing. Is this a common issue with the new release? I’ve updated my graphics card, uninstalled and reinstalled multiple times, and am now attempting to revert to an older version because I have work I need to do.This is an insane amount of hassle for the cost of a subscription.

This happens when I highlight a section of text, go to Character, type a font name, and press Return (Enter). The text block then turns completely grey, and I have to find a way to turn it off. Sometimes it even gets stuck on the screen when I minimize Photoshop.I just bought a new Mac Air M5 expecting a better experience than my old Windows laptop, but then I ran into this bug. Does anyone know why this happens and how to fix it? It's really ruining my experience on Mac.I’m using Photoshop version 27.9.1If I don't search for fonts and just select them manually, it doesn't happen.Someone literally told me to '"just quit the habit of searching for fonts." and I was like, 'WTF is that?" I shouldn't have to change my entire workflow just because of a bug. 

I am experiencing a reproducible problem with Find Distractions → General Distractions in Photoshop.Find People and Remove Wires work normally.However, when I select General Distractions, Photoshop starts processing and then suddenly quits in the middle of the process. There is no useful error message before Photoshop closes.The issue appears to be limited specifically to General Distractions.I have the latest version of Photoshop installed and I am also using the latest NVIDIA drivers.Has anyone else experienced this? I would also appreciate it if Adobe could confirm whether this is a known issue.Below are Photoshop System Infos , and GPU and driver details. *******Adobe Photoshop Version: 27.9.1 20260803.r.1 65900e1  x64 (final, Release)Number of Launches: 516Operating System: Windows 11 64-bitVersion: 11 or greater 10.0.26200.9168System architecture: Intel CPU Family:6, Model:7, Stepping:1, AVX2, AVX-VNNI, HybridCPU(8:16), HyperThreadingPhysical processor count: 24Logical processor

I have two computers. One opens NEF files in Photoshop, but recently the other does not. Message: "Could not open...because of an end-of-file was encountered". What do I do?

Photoshop 25.12, ACR 16.5.0.1954 on macOS Sequoia 15.0. Photoshop will open 8-bit HEIC files correctly. However, a 10-bit HEIC will open into ACR but then fail to open into Photoshop for editing. Both display correctly in Bridge 2022 and Bridge 2025 beta. HEIC files were exported with Preview 11.0 from both a 16-bit PSD and from a DNG file. https://www.dropbox.com/scl/fo/w8e1zehi2w5oo4tq2x8rn/AC5BDxjd4tzQUMK5lDTkdow?rlkey=1ghhv3jwncrmig31zxanuyfuh&st=q0gudc7s&dl=0  Adobe Photoshop Version: 25.12.0 20240903.r.806 055f5e9 x64Number of Launches: 69Operating System: Mac OS 15.0.0System architecture: Intel CPU Family:6, Model:14, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreadingPhysical processor count: 6Logical processor count: 12Processor speed: 2600 MHzBuilt-in memory: 16384 MBFree memory: 6805 MBMemory available to Photoshop: 12627 MBMemory used by Photoshop: 70 %Crash Handler: AdobeDCX Version: 7.24.8SAM SDK Ver

i want to install ps in my pc but it's not incompatible so, there is any way to skip it and download the app or install an old version the problem is in the processor

Windows 11 laptop, always with the latrst Photoshop version.I'm just learning the crop tool and for the last few weeks have been making some good 5:4 crops.  As of this morning, I've lost the ability to delete cropped pixels, and toggling the garbage pail icon just switches between filling in an area with a solid color or a checkerboard.  I want neither.  How do I get this back?Please see both attachments.  Edit - I changed the PNG screenshots to jogs, but I still can't see them anything in the previews, but you should get the point without them.  I also reset the crop tool which did not help.

In the latest version of Photoshop for the Mac, the keyboard shortcut to scale a photo was available. Easy to use and fast. That function seems to have disappeared. Now I have to go to the top bar and choose “Scale” from a pulldown menu. Why the change or am I missing something?

after creative cloud latest updates in system photoshop v27.10 in open files (images files,jpg formats,psdfiles) .open very slow why? but same issue not in before version also i check it 

Any time I attempt to edit a photo with any tool, the screen display has multiple title bars or will cause the screen to go completely black. 

Hi!I have a form I’m building that brings mapped fields from our Core system into the PDF.  One of those fields is an interest rate (AP_1_INTEREST_RATE).  This field comes in from the core as the number and a % sign, i.e. 1.99%.  That would be great, however, the line on the PDF that it is populating on has a static % sign already, so on the form it looks like 1.99%%.  I cannot for the life of me figure out how to strip the % from the mapped field (AP_1_INTEREST_RATE).  I also have the field format as NONE so it isn’t gaining the % because of the way I have it formatted, it’s coming from the core that way.   Sorry if this is a dumb question but I am a novice and just can’t figure this out. I know how to ADD things but can’t figure out how to remove them.   Any help would be appreciated!

Markup and Tune tools are missing in AI Assisted Editor.AI Assisted Editor is enabled in my updated Photoshop 2026, but the Markup and Tune tools are missing from the toolbar.The only available tools are:Prompt Fill Remove Crop and expand Upscale Remove backgroundI have tested both Photoshop 2026 and Photoshop (Beta) 27.11.0 on macOS. I also opened JPG/PNG images directly instead of adding them as reference images, but Markup and Tune still do not appear.Adobe’s AI Assisted Editor documentation shows that Markup and Tune should be available. Could you please confirm whether these tools are being released gradually by account or region, or whether this is a bug?System: MacBook Pro M4Region/account: Japan