Questions

Na de update van 7 aug 2026 krijg ik bij meer dan 10000 foto’s het teken om het Adaptief Profiel bij te werken. Ik heb willekeurig een aantal foto’s gekeken maar het lijkt erop dat dit bij foto’s gebeurd waarbij het Profiel is aangepast naar Aangepaste Kleur. Ik vermoed dat dit door de nieuwste versie van LC is gekomen. Echter ben ik ook op 2 juli overgestapt naar een iMac M4 en heb toen de nieuwste software van LC geinstalleerd. Hiervoor draaide ik op een iMac uit 2017 met OS 13.7.8 (22H730), Daar kon ik niet de laatste versie van LC op draaien. Kan mijn vermoeden kloppen? 

Hi everyone, I'm currently trying to migrate my entire Lightroom CC library (about 41,440 images) into a new, empty Lightroom Classic catalog. However, the sync in Lightroom Classic is extremely slow: after more than 20 hours, only about 3,200 images have been downloaded. For comparison:On the same system, I also ran the Lightroom Downloader app, which downloads all images in about 20 hours total – many times faster. The app maintains a stable download rate of 30–100 Mbit/s, with peaks up to 200 Mbit/s. But when I pause the Downloader and activate the LrC sync instead, the download rate drops to below 1 Mbit/s, with only occasional peaks and very long idle times. Sync activity in LrC barely progresses, and it seems to load only 1–2 images at a time, with frequent stalling. Both apps are:Running on the same systemUsing the same networkTalking to the same Adobe serversSo I can safely rule out any system or network bottlenecks. I've already tried:Resetting th

I would like to know which “AI” processes are counted and automatically tagged as such.Since I’m required now to mark images as “Made with AI” and I’m still not sure how that truly applies; I’d like to see how much of the LR features that made it worthwhile I can still use without having to have my clients put AI badges all over the place, or having to provide them with 10 different versions for Social media so the markings are “clearly recognizable” on an iphone 4s as well.Discussing the principle of “faking”, i.e. retouching vs. doing it with/without AI is futile in the face of EU lawmaking, but what processes would I have to circumvent so my work doesn’t get automatically flagged via creator cloud?As much as I love the AI mass masking features, I’ve done well without them for decades and I’d rather live without my work being inadvertently AI tainted. Imo, many automated processes are and have been using some sort of artificial intelligence, video games with “opponents” always did. T

I upload Iphone photos from my phone to the LR Cloud using the LR Phone App. I then go into LrC and let them sync back down to my desktop. No problem so far. Once the photo files are safely on my desktop I unsync from the cloud. I then assign keywords and other metatdata whilst in LrC. My next step is to sync the photos back to the Cloud as smart previews. I do this by dragging the photos to an already synced collection. However, they don't sync. They try for about 3 mins and then they remove themselves from the synced collection. However, they still appear under "All synced Photos" and the blue sync ball continues to spin. However, when I remove these photos from "All synced photos" the green tick immediately appears. To sync these photos I have to restart LrC and then again drag the photos the the synced collection. They then sync properly in seconds. I should add it makes no difference whether I delete smart previews, delete the deleted original files from the deleted folder, save t

Olá, estou tentando realizar uma captura vinculada e o Lightroom não está identificando a câmera. Estou utilizando uma Sony 7CM2, um Samsung Book 4, Windows 11… Já testei em um Dell e a câmera vincula corretamente, mas no Samsung não conecta. Alguém enfrentando o mesmo problema?

While working on a project doing a lot of parameters sync, all the pictures suddenly disappeared from the directory.There were 258 pictures in this directory.The directory on the disk is also empty.I have copied back the files from a backup and re-sync the directory in Lightroom.I had to do again the modifications I have done before.

LrC --> Library --> library Filter: when I set on filter type "raw" and I view date by date, with every change of date the file type filter switches to "all types", so it does not stick on type "raw".  Can I keep it fixed on a certain type?

Oftentimes, I cull my images in Lightroom and rate my selections from 1–5 stars. Once I’m finished, I want to filter the images to show anything rated one star or higher. However, Lightroom frequently defaults the filter back to “equal to”, so clicking one star only displays images rated exactly one star, causing me to miss images rated two stars or higher.I recommend adding an option to lock the star-rating filter setting to “greater than or equal to” so Lightroom remembers the user’s preference instead of continually reverting to “equal to.”Rating is equal to - This auto populates all the time and sometimes I dont notice. 

Since recent Lightroom Desktop updates, rapidly culling imported photos has become noticeably slower.Steps to reproduce:1. Open a large series of imported photos in Detail view.2. Enable Caps Lock for automatic advance.3. Press and hold Z to flag photos as Pick, or X to flag them as Reject.4. Keep the key pressed to move continuously through the series.Expected result:Lightroom should advance through the photos quickly and smoothly while the key is held down. Previously, this worked almost like watching a high-FPS burst as a video.Actual result:The flow now repeatedly stutters and stalls. Lightroom pauses between photos before continuing, making this fast culling workflow much slower than before.System:Lightroom Desktop, cloud-based version 9.5macOS 26.6.1MacBook Pro with Apple M3 Max and 128 GB memoryAdditional information:I work with Sony α1 II cameras, producing RAW files of approximately 55 MB each. Lightroom previously handled rapid culling of these files smoothly.My MacBook Pro h

Hello,   Since upgrading to my new very powerful system, Lightroom Classic (version 15.0) has been performing extremely slowly.   Issue description: There are significant delays (several seconds, sometimes up to 10 seconds) before Lightroom responds, particularly when using the following tools:   • Masking (people, subject, background)• Color mixer / color correction• Crop overlay tool   All basic adjustments (exposure, contrast, highlights, shadows, etc.) work normally. Other Adobe applications (After Effects, Photoshop, etc.) run completely smoothly. My previous, weaker system did not have these problems.   System specifications: • Windows 11 Pro (x64), Build 26100.6899 (25H2)• NVIDIA GeForce RTX 5070 Ti (AMD onboard GPU disabled)• AMD Ryzen 9 9950X (16 cores, 4.30 GHz)• 128 GB DDR5 RAM (4×32 GB Corsair)• Mainboard: ASRock X870 Steel Legend WiFi• Catalog located on an external SanDisk Extreme SSD (1 TB) connected via high-speed USB hub   Steps already ta

If I turn off GPU usage in preferences and restart LR I get the same result - a dark mono image displayed after denoise.The system info from LR is as follows:Lightroom Classic version: 15.5 [ 202607291506-b8869fa7 ]License: Creative CloudLanguage setting: enOperating system: Windows 11 - Business EditionVersion: 11.0.26200Application architecture: x64System architecture: x64Logical processor count: 16Processor speed: 3.6GHzSqLite Version: 3.36.0Adobe GSDK Version: 1.4.0.213CPU Utilisation: 0.0%Power Source: Plugged InBuilt-in memory: 32315.4 MBDedicated GPU memory used by Lightroom: 1194.5MB / 128.0MB (933%)Real memory available to Lightroom: 32315.4 MBReal memory used by Lightroom: 5499.2 MB (17.0%)Virtual memory used by Lightroom: 5962.6 MBGDI objects count: 841USER objects count: 2612Process handles count: 2270Memory cache size: 724.2MBInternal Camera Raw version: 18.5 [ 2673 ]Maximum thread count used by Camera Raw: 5Camera Raw SIMD optimization: SSE2,AVX,AVX2Camera Raw virtual mem

Hi there,I got a new computer after a couple of years of exclusively using Lr mobile or on the iPad.Since my cloud quota was quite full, I’m in the process of syncing all my photos from the cloud down to LrC. The plan is to take the photos synced down out of ‘All synced photographs’, then put them back in order to upload only the smart previews. I’ve seen a lot of users do this successfully! However, for any photos in which I’ve tried this process (I’ve attempted this with very small batches before committing to all my photos) the sync process gets stuck at uploading.Please note:If I’m importing brand new images into the catalog and into ‘All synced photographs’, putting them into a collection or not, the syncing behaves as it should. There is no items pending sync in any other devices, and no items in the ‘sync errors’ folder in Lr web. I have updated LrC to the latest version.I’m really at a loss here and will appreciate any help.Thanks in advance!

Hi,I recently switched from a MacBook to a Windows PC, and it seems to me that Lightroom Classic is not working properly — although Adobe support says everything is fine.The program runs very slowly. When using masks, there is a noticeable delay in the preview, and the image appears to jump or refresh. I’ve attached a video below showing the issue:https://youtu.be/Rdp1xHr3LAk?si=JiAgedctehGnfyoIIs this normal? On my MacBook M1 I never had any problems with smooth performance.I also noticed that when Lightroom Classic is open, the entire computer seems to slow down — even moving a Chrome window feels laggy and stutters. When the program is closed, everything becomes much smoother again.Here is my computer specification: AMD Ryzen 9 9950X3D ASUS Prime X870-P WIFI 192 GB DDR5 5200 MHz RAM RTX 5080 16 GB 2 TB Samsung 990 PRO M.2 (up to 7450 MB/s) 4 TB Samsung 990 PRO M.2 (up to 7450 MB/s) 4 TB Samsung 990 PRO M.2 (up to 7450 MB/s) 1200 W BeQuiet modular PSU Fractal Meshify

When I try to open LrC a system error pops up, "The code execution cannot proceed because mfc140u.dll was not found. Reinstalling the program may fix this problem" I have tried to uninstall and reinstall, and it still pops up.

tijdens het analyseren van grote import sluit het programma steeds af.Hierdoor moet je iedere keer opnieuw beginnen en kun je je workflow niet afronden.

OS Name Microsoft Windows 11 ProVersion 10.0.26200 Build 26200Processor AMD Ryzen 9 5900X 12-Core Processor, 4001 Mhz, 12 Core(s), 24 Logical Processor(s)BaseBoard Product ROG STRIX X570-E GAMINGInstalled Physical Memory (RAM) 64.0 GBGPU 3080Ti with latest Studio DriverHoping to get some assistance here.After a stage photography gig last night, I’m now sitting on about 1500 images to get through. It pushed me to finally look into why my setup has been struggling.For a while now, Adobe Lightroom Classic just hasn’t been running like it used to. Editing feels sluggish, and once I get into Develop—especially with masks—it really starts to grind.What’s frustrating is that it used to run smoothly on this same machine. Something has clearly changed, and I’m trying to figure out what.In the Adobe Lightroom Classic System Info, I’m seeing GPUDeviceEnabled: false, which (as I understand it) means Lightroom isn’t actually using my 3080 Ti.What’s confusing is that:In Lightroom Preferences → Perfo

When I choose “Generate using Firefly” from Lightroom Classic, my default browser (Firefox, latest version) opens but the page just gets stuck on loading and never completes the upload. I have tried other browsers - Edge, Chrome & Vivaldi - when I select an image to upload the process simply doesn’t happen. I choose an image and - zilch. The page stays as it is.

Depuis la dernière mise à jour version 15.5, lorsque je shoote en mode connecté via USB, boitier canon 5D MKIII, lorsque je veux sélectionner mon collimateur de mise au point, j’appuie sur le bouton de mon boitier pour faire apparaitre mes collimateurs, et l’affichage disparait aussitôt. impossible dans ce cas de changer le collimateur. Cela fonctionne lorsque je ne suis pas connecté et avec la version précédente de LR (15.3.1) car la suivante me posait des problèmes, je ne pouvais plus déclencher mon appareil après quelques photos, toujours en mode connecté

 Hi everyone,First, ChatGPT helped writing this post since i have been talking with it about this question yesterday the whole day. now the question below:I'm having a really weird problem with Lightroom Classic and I'm running out of things to try.When I switch Lightroom Classic to Chinese, most of the UI becomes garbled/unreadable. The really strange part is that the top menu bar displays Chinese normally, while most of the rest of the Lightroom interface is messed up.Even stranger: Photoshop on the same PC displays Chinese perfectly.So I'm starting to think this might be something specific to Lightroom's UI/text rendering rather than a general Windows Chinese-font problem.SystemWindows 11 Build: 10.0.26200.8875 Lightroom Classic 15.5 Windows display language: English (United States) Display scaling: 150% Lightroom scaling: Auto Chinese fonts: Microsoft YaHei installedThings I've already triedI've gone pretty far down the troubleshooting rabbit hole:Uninstalled and reinstalled Lightr

SummaryAfter Lightroom Classic repaired a corrupted catalog, cloud sync froze indefinitely ("Syncing 186 photos") with no error shown anywhere in the UI. The console log shows the sync engine repeatedly failing to write its DNG-proxy bookkeeping rows because it re-uses row IDs that already exist: the repair left the catalog (.lrcat) and the sync store (Sync.lrdata) restored to inconsistent points in time. Each app relaunch synced exactly ~20 more assets before freezing again. Rebuilding sync data (renaming Sync.lrdata) resolved it completely.EnvironmentLightroom Classic 15.5 on macOS 26.4.1 (build 25E253), Apple Silicon ~432 MB catalog, sync enabled to Lightroom cloud Affected assets: JPEG film scans, which go through DNG-proxy conversion for syncSteps that led to the bugCatalog became corrupted mid-session while sync had ~186 assets queued (the sync engine had just written a batch of new proxy records to AgDNGProxyInfo). Repaired the catalog with the built-in repair on next launch. Sy

Can i delete this temp folder without causing any problems in adobe programs?

Since the most recent Camera Raw update, all CR3 thumbnails show as purple lines on MacBook Air. Tried trashing and reinstalling Camera Raw and deleting a Mac thumbnail file in the library, but no change. 

I'm having problems tethering my Sony A7R4 camera with Lightroom Classic and would appreciate any advice you can offer.  Basically, my camera is not being recognized when I try to tether it to Lightroom Classic.  However, my camera tethers perfectly with Sony Imaging Edge Desktop Remote.  I am using a brand new Tether Tools USB-C to USB-C tether.  Dell XPS 15 computer running Windows 10 Pro.  I have also tried using an Anker USB-C tether and different ports on my computer (again everything works perfectly with Sony Imaging Edge Desktop Remote).  Is this a known problem?  Are there any special settings, drivers, etc. on my camera, computer, or LrC software that I need to take into consideration?  Really appreciate any advice you are able to provide!  Right now, it just hangs up on this "Detecting Camera" pop-up in included screenshots.

I've tried all the google suggestions, but cannot get the menu headings 'FILE EDIT ..etc .' in Lightroom Classic.    Need this to follow instructions in an Adobe video to fix another problem.