Questions

Hi, I started using the PS today, but couldn't get too far.I tried to create a file, which I need for college, but nothing happens. This is the setting. Note here, it does let me create 8bit file.I am using a gaming laptop, Lenovo Ideapad Gaming 3. I should have memory left at least 50GB. Thanks,Jenni. 

My client wants the back logo placed on a white T-shirt, but the logo has a checkered background that he wants to keep and blend naturally into the fabric. Right now it looks like a hard square sitting on top of the shirt instead of blending in. What is the best way in Photoshop to blend a checkered PNG background into a white T-shirt so it looks natural and not like a block?

I have just built a new Windows 11 computer and installed PS 2025. Now the "save as" dialogue box keeps opening in the top left corner and no matter how many times I drag it to the centre, the next time I "Cntr/shift/s" it opens in the top left corner again.This is extremely anoying and uncomfortable.Anybody have a solution

Hallo, wenn ich aus Bridge mehrere Bilder in Photoshop Ebenen lade , ist das letzte immer im Smartobjekt. Ist dies ein Bug ? Das letzte Bild muss ich immer erst rastern,bevor ich die Bilder ausrichten und überblenden kann.Hat jemand eine Lösung oder auch dieses Problem

Hello everyone.I want to create a brush that can draw a stroke like the one shown above. I plan to use it for shading my artwork. Please help me — thank you so much!

Anyone getting this error on the lattest Photoshp release 24.0.0? I'm constantly getting this issue. 

I've been searching all night, not a single answer I can find and it's driving me crazy!

Hello!I'm encountering some issues while using the Camera Raw Filter in Photoshop. At first it seemed to happen while hovering over the presets (preview), but then it also occurred while adjusting some general sliders or just switching between some masks. The interface becomes unresponsive and/or visually "scrambled", with overlapping or misaligned sections, and in some sessions. Usually the filter freezes entirely. The following error types appeared in the logs (I'll provide further if you let me know what else is needed, it has a good repro rate):*** Error: Unexpected re-entrancy in RedrawMonitor -- skipping *** *** Error: Unexpected re-entrancy in RedrawMonitor -- skipping *** [...repeats] *** Error: GetCorrectionValues - Out of range group index *** *** Error: GetCorrectionValues - Out of range group index ***I had the same workflow on an older laptop (7+ years old) with far more modest specs, and surprisingly, the Camera Raw Filter performed better — with no freezes or redraw

hi, i followed this tutorial  https://www.youtube.com/watch?v=vXRDvYUBqXY I want this neon text and did all the steps, now when i click my smart object I have problems with: 1. this is my smart object (smart1)2. when i click on the Font layer and want to change the text i only get this small box, i need to change the text to 6pt to read everything like ORIGINAL COOL NEW TEXT. how can i increase this box (smart2)3. and when i switch off the background i see all the filter grid from the fitler gallery, i want to copy paste my neon colour font with grid effect to a new picture without the background 😞 (smart3) thx

Hello.  I've been attempting to use Photoshop CC to stack images.  I have a camera that can utilize focus bracketing. I recently tried to stack 99 focus bracketed images, with a very small focus differential, with horrible results in Photoshop CC.  The process was: 1) auto-align; 2) auto-blend; 3) flatten layers. Below is the result of my stacked image. The result should have been a sharp picture from front to back. What I got was gobs of blur everywhere. Wasn't expecting such poor results from Adobe. Please, if anyone has any useful input/advice, I'd be very grateful!

I just instaled the new PS 27.0.0 but it does not allow me to save in HDR or EXR.for EXR I did install a plugin, however for HDR I still cant do it.Does anyone knows how to solve this?  

I'm having a very difficult time due to the sizes of the menu items at the top of my screen and the cursor sizes when I'm editing an image. How do I increase these sizes? I'm running the app on a Windows 11 desktop.Elias Davis

Ho iniziato ad usare Firefly per alcuni progetti connessi a mie fotografie. Al momento ho avuto buoni risultati che mi spingono a continuare.  Ho per ora il problema del file finale realizzato che ha una risoluzione troppo bassa. Ho provato a cercare eventuali istruzioni, ma non sono riuscito a risolvere.  In altre parole ho inserito in Firefly un JPG  4000x6000 e il risultato che ho ottenuto è stato 864 x 1184.   C'è modo di ottenere direttamente un file di dimensioni maggiori ? Grazie per ogni consiglio,MarcoFirefly : aggiornato nov. 2025Computer : Apple  IMac  M4 

My suggestion is for Adobe to eliminate "layer visibility" from the history panel. Like may users, I frequently hide and show layers I have created, sometimes toggling back and forth many times to evaluate my work. This has the unintended consequence of cluttering up the history timeline with "layer visibility" repeated over and over, making it harder to find the last real edit you did. In some cases, you even lose access to earlier edits because "layer visibility" is taking up so many spaces that you exceed the maximum. Maybe Adobe could make it a user option to either hide or show layer visibility commands in the history timeline.

Pessoal meu programa está atualizado para última versão, mas o Câmera Raw não funciona. Já tentei:- Desinstalar e Reinstalar ambos (Photoshop e versão Beta);- Instalar versões antigas (Photoshop e versão Beta);- No meu Creative Cloud consta como Câmera Raw instalado na máquina.- Tentei instalar externamente através do site adobe.- Reinstalei a máquina diversas vezes.- Limpei as preferências do Câmera Raw para o padrão de fábrica. O que acontece: Não abre através do atalho e na aba Filtro > Câmera Raw aparece como indisponível (em cinza claro, como se estivesse desabilirado); 

Hi,  I'm trying to find a way to quickly, thru Generative Ai or other, in PhotoShop, replace a blown out interior window, with a properly exposed window; basically the same two shots on a tripod with no movement, only one shot is well exposed for the interior of the room, and therefore the window is overexposed, and the other shot is underexposed for the interior of the room, but the window is properly exposed. In the past, I would manyually layer the good window in place of the poor one, but I assume Ai has a quicker solution?  I see Imogen has a solution, but it seems not to be very well done yet, at this point.  Please advise...

I'm new to using paths and the pen tool, can somebody explain to me how I can fill a path with a pattern on a new transparent layer, rather than a solid background? This is my problem. Thank you!

Why does Adobe Photoshop suddenly exit by itself and lag after updating? I have sent a message from Adobe Photoshop error

Hi all,I often use the Image>Adjust Variations option in Photoshop but do not see the option in Photoshop CS6. I know we are still only in the BETA stage but I am still curious. I hope it is not going to be dropped. I like to use it for quick fixes on small portions of the image every now and again:)Thank you in advance for your help,Christine

I recently installed my copy of Photoshop CS5 on my new Windows 10 computer. I deactivated my copy on my old Windows 7 computer. My copy was an upgrade license from CS4 to CS5. I think I messed up the install because when it asked for the license key, it just accepted the CS5 license and did not ask for the CS4 base license like it had done in the past.   Now I cannot update my copy to the latest patches, as such, I cannot get the RAW format to work with my camera in Photoshop. When I try to update, Adobe Application Manager downloads the file but says "There was an error downloading this update. Please quit and try again later." The customer support link that shows with the error says 'Upgrade error: "This serial number is not for a qualifying product"'.    I tried to uninstall Photoshop with the WinCS5Cleanupscript that Adobe provides, but after re-installing I still have the same problem. Any thoughts?

I have a brand new PC (Ryzen 7, 32GB RAM, NVIDIA RTX 5060). Everything works perfectly, except when I try to use the "Skin Smoothing" filter (the neural filter) in Camera Raw. The moment I apply it, the screen flickers, Photoshop freezes completely, and then I get a message saying that "Camera Raw GPU acceleration has been disabled due to an error."   I've tried everything: I reinstalled the NVIDIA drivers (using DDU, and tried Studio and Game Ready). I ran a stress test on my graphics card (Unigine Superposition in 4K), and the card is 100% perfect. The problem only occurs with that filter. If I disable GPU acceleration in Camera Raw's preferences, it works (but slowly), so it's clearly a bug. Is anyone else with a new card (RTX 40 or 50 series) experiencing the same issue? It seems like a bug in Adobe's software with the new hardware.   [Mod: Reformatting thread for better readability]  

Since Adobe updated the Photoshop app, I noticed the font of that logo has changed. What font does Adobe use for the new Adobe Photoshop logo?

Hi everyoneI have found an old family archive of photographs which I'm wanting to digitise, enhance, possibly colour and print out for Christmas presents (yep, this is a long term project!). I'm a bit stuck at the first stage and could use some advice.When I scan the pictures using an Epson V700 scanner, though it's capturing all the detail which is great, it's also capturing dust and scratch marks on the picture and particularly irritatingly dust and lint marks that are trapped under the scanner glass!I can't take apart or clean the scanner glass so those marks are transferring to the scans I'm making.It will take (and is taking) hours to painstakingly remove all these marks by hand with the spot removal tool and I was wondering if there was anything automatic that was more effective?I have tried...Photoshop - Dust and scratch removal tool - it doesn't do a great job as it just blurs the picture, or otherwise adversely affects the picture which I don't want.Lasersoft Photoshop SRDx Pl

I have a hi-res image of two people wearing glasses. When I use the select tool, it's not grabbing the glasses on either person. Not listing glasses as a choice, either. (Haven't seen it do that before.) Using Photoshop 2026 v27.0.0 on a Macbook Pro M4. Suggestions? Bug?? (I blurred their features for privacy issues to post here.)

I need to change the background color of a PNG image that has only one layer, using PhotoShop 2018. You can't select everything else and mask it because it's a very complex image, and the Spot Healing Brush tool doesn't seem help much because the color I'm trying to change is very subtle and only appears in certain areas. There must be an easy way to just change the entire background color, but I have yet to find it. Can anyone help?