Questions
Recently active
“I own a retail copy of Adobe Premiere Pro CS3. I have the original discs, serial number, receipt and packaging. I am reinstalling on my own computer, but CS3 stops at ‘Activation Required’ because the old activation servers are unavailable. I need assistance with a legitimate CS3 activation solution for my existing license.”
Kindly read the question above and STOP GIVING ANSWERS NO WHERE NEAR MY QUESTION. Can we get a human involved?
Trying to activate my 100 GB of storage on Frame.io included in my adobe subscription. I already had a free frame.io account registered using the same email as my adobe ID prior to Adobe acquiring Frame.io. Now whenever I login on frame.io (web or within Premiere) I only have access to the old 2GB of free storage. I tried connecting my frame io to my adobe login before.And I followed along the instructions on this page:https://helpx.adobe.com/x-productkb/multi/frameio-creative-cloud-faq.html However when I try to go to my account settings now on Frame.io to change this primary email adress (as stated in the FAQ), it already says: “manage on Adobe” and redirects me to the adobe account page (for managing my adobe ID in general). So I can not change my email no more on the frame.io account page. Only on my adobe page. Do I change the email adress there? Though I do not wish to change my primary adobe email at all... Thanks in advance!Merlin
When I finish adding all the videos I want to edit and start editing, all the videos in Premiere play in slow motion. Even the timer runs slowly, meaning the settings are set to slow motion, not that the slow-motion effect is actually being applied. Even when I run the timer on my phone and play the video in the app, the timer in the app is slower. I don't know what the problem is exactly. I've checked the frame rate settings and everything else, but there's no result.
This may be hard to explain. My audio waveforms on the timeline are too high. I’m not talking about the vertical height of the track. I mean the display itself (marked in red) is higher as if the audio is louder than it actually is, and it’s never been like that before. It should be maybe halfway up, not nearly all the way. I think I accidentally hit some combo of keys that made it happen, but I’m not sure, and don’t know if there’s a setting to look for. To help it make sense, in Audition, you can change the decibel range on the right side, which will make the waveform appear taller or shorter. So if it’s like this… And I change the decibel range by scrolling my mouse wheel over it to display just the range I’m working with, the waveform “zooms in”, making it appear louder when it’s not. It’s just showing the audio more closely. This is what it seems like happened to my audio timeline in Premiere, only it doesn’t have that decibel range thing on the side, just the volume meter, so I
Someone gave me a ton of LRF files to begin working on a project because it was going to take a while to upload the full quality. I renamed the LRF files to have an mp4 extension to begin working. I’ve now have access and have downloaded the original higher quality mp4 files, but I am struggling to link them in Premiere.I’ve selected all the “Low-res” video files in the project and clicked “Make Offline...” but when I try linked said file to the Hi-res mp4 nothing seems to happen. What’s the best way to go about this?
There’s a paid third party software, Syncalia 3, that has been incredibly useful to me. I wanted to let Premiere users know about it but wasn’t sure the right way / right forum in which to share the info. I work on documentaries and often run into situations where there’s verite footage by multiple cameras that are supposed to sync with each other (and with separately-recorded sound) but there’s no timecode or timecode that doesn’t match, no clapper, no camera reports explaining what clips are supposed to sync with which other clips, etc. The software isn’t expensive and I think knowing that it’s an option would be helpful to Premiere users.I took a look at the Adobe Community Guidelines / About third-party content / Non-Adobe Products:It provides a service not offered already by Adobe / fixes an issue that Adobe doesn't offer a solution for: Syncs dozens to hundreds of clips shot on the same day, sometimes using creation date metadata (if there’s no timecode), and keeping it sorted by
Hello, I’ve tried to install première pro but I keep getting the error 127 during installation.I have more than 100gb available and tried everything in the help centers/videos I’ve found but nothing seems to work. (Disabled anti virus, checked storage, emptied adobe temp file, added administrators and system to full control, reinstalled crative cloud after using the cleaner tool)Any other adobe app installs just fine, but not premiere proAny ideas?(I’m on windows 10 on an Amd ryzen 7 3700X cpu)
I am trying to re-edit a video in Premier Pro. Using keyframes and opacity changes I am fading several video clips out. Everything looks and plays well in the timeline but when I export, the opacity fades just snap to black. This is happening on my laptop, and on my desktop with completely different project files.I have tried the following;Toggle Composite in linear colour.Have tried using software encoding.Have tried unchecking Maximum bit depth and maximum render quality.Have tried rendering before export.Have tried nesting.Have tried checking Include Alpha I am working with Notch LC Thank you for any help.
I’m using the very aged Premier CS6 video editing programme. This programme has served me well all these years with only very rare problems - quickly solved.Starting a new project I now get multi line audio time lines. See top illustration in attached picture. Can anyone can tell me how to reset to my usual audio view as shown in the lower clip.
Hi guys, does anyone know what may be causing this video noise. Every time i export out even a low-res preview this appears in random spots in the video. If i’m lucky sometimes, it doesn’t appear at all, but no one seems to know the route cause of it. Its only been happening in the last year. Any help would be grateful, thank you
I'm not sure why exactly this is happening but as you can see it's almost as if the mask e projecting in the background
Hello! I am running into some issues with the audio channels in multicam clips when I bring them into a timeline. I have 4 cameras with scratch audio and external audio with 5 channels that I’m bringing into a multicam. I want to be able to see all of the audio channels from the cameras and external audio in the timeline when I bring in the multicam clip. My process has been selecting all the clips > right click > create multi-camera source sequence > make sure All Cameras and Automatic are selected in the audio section. Then when I cmd click into the multicam, everything looks normal. I want to make sure the audio track layout I see when I click into this multicam remains the same when I bring it into a timeline. I right click on the multicam in the project window and Modify > Audio Channels and set to mono with the amount of tracks in the multicam and make sure each track is checked matching the correct channel. Then I bring the multicam clip into a Stereo sequence with “
Hi,I use a Wacom Intuos Pro and Premiere v13.1 on a Mac and I have the following problem since about a year (so with all the previous Premiere versions as well).When I navigate with my pen the cursor very often "gets stuck" - when I click on something and move away it keeps thinking that I am pressing down. It happens during anything - navigating between different timelines, doing colour correction etc. It is really annoying so sometimes I have to switch to the mouse which does not have this problem. I have this tablet for two years and the clicking works perfectly fine with all the other software including other Adobe Products like Lightroom and Photoshop, but Premiere is almost impossible to use.How can I fix it?Thank you!
Caro amigos, me ajudem por favor!! Recebi feedbacks recentes de alguns clientes me informando que os vídeos editados foram em mono.Mesmo eu nunca tendo mexido nessa configurações!Quebrei a cabeça e consegui resolver de alguns reels que editei apenas adicionando o efeito (preenchimento da esquerda com a direita). Mas mesmo assim vários outros vídeos eu não consegui resolver.E detalha que está afendo desde a voz até as trilhas, eu pego o arquivo e stereo, joga na timeline e na hora fica mono. Alguém pode me salvar?Obrigado
こちらの動画の0:00~0:02の間に表示されている左下の扉絵のアニメーションを再現したいのですが、どなたかご存知でしょうか?最近Premiere Proを触り始めたばかりで、操作に不慣れなため、分かりやすく教えていただけますと幸いです。Premiere Proのバージョンは26.3です。
Hey hey, I created captions for my video and they look good: adobe automatically removed all “uhms” from the video. When I export as srt. , all the uhms are back and mispelled words show wrong again. txt. file on the other hand looks good, but I can’t upload that on Youtube as it will include all the timestamps (within the actual text).Any fix for the srt. file? Thx
I am trying to drop in an animated title card a designer sent me on a transparent background, but for some reason it doesn’t seem to show up in the playback window or when I export the video from the timeline. The animation plays perfectly in the preview window, but when I drag it into the timeline, it’s shows up as a rectangle on the timeline but seemingly is transparent or isn’t there at all. I’ve tried rendering it any number of ways (render & replace, render in to out, render selection) to no avail.Anyone have any ideas on how to fix this?
I have numbers, 1 through 10 that I want to have the same x axis and y axis. Is there a way to copy and paste the axis points to all the numbers instead of me having to do it manually?
Trying to move a project from my external HD to internal SSD because it lags on the external. I have copied the files to the SSD but can’t figure out how to run Premier to edit on the SSD. Have searched here and online for instructions with no luck. How do I do this?Thank you
I'm having an issue with the Text > Transcript panel in Premiere Pro. The transcription is generated successfully, but instead of displaying the full words, it only shows a few letters and symbols, making the transcript unreadable.I've already tried reopening the project and restarting Premiere, but the problem persists. Has anyone experienced this before or found a solution?Any suggestions would be greatly appreciated.
Hi,I'm experiencing a strange issue in Premiere Pro.In my timeline, I intentionally left a gap of about 3 seconds between two clips to create a hard cut to black before the video continues.Inside Premiere, everything works as expected. During playback, the screen goes black for the duration of the gap and then the next clip starts normally.However, after exporting the video, the last frame of the previous clip stays frozen during the entire gap instead of showing black. Once the gap is over, the next clip plays normally.I've already tried several things: Leaving the gap empty. Replacing the gap with a black video layer. Adding a fade transition. Deleting and recreating the cuts. Clearing render files and exporting again. The issue only appears in the exported file, not inside Premiere.Has anyone encountered this bug before or found a solution?Thanks!
I am looking for a particular font - Helvestica Now Pro. Is this available to download for Premiere Pro 2018 (Mac)? How would I go about installing? Thanks!
How to add an event listener for Project Load using Premeire Pro UXP API? In the docs there is an EventManager class ( has an addEventListener function), there is ProjectEvent (EVENT_OPENED, EVENT_ACTIVATED, EVENT_DIRTY). Not sure where and how to wire up this event listener. There dont seem to be any examples in the documentation on how to do this.
Never mind. I was venting. I wish reporting bugs on this forum was fruitful.
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.