Questions

ALGUIEN TIENE LAS VERSIONES 2022 DE PREMIERE, AFTER EFFECTS Y ENCODER PARA UNA MAC CATALINA?

I'm trying to build a MOGRT in Premiere, essentially trying to replace a MOGRT from AE. This has to do with export times. Dynamic link is too slow, it's more than doubling the time it takes to export, a 30-40 second video takes 5-6 minutes. It can also keep playback from getting bogged down and clunky. I've created MOGRTs in Premiere before so it's not the process I'm having an issue with. In the MOGRT I'm currently working on I'm using video under the text layers in the Properties panel. The video frame is animated to slide in and slide out with other elements above and below it. The problem I'm encountering is that once I've finished and exported everything as a MOGRT, when I drag it back onto the timeline, I can't figure out any way to replace the video layer. Obviously, to replace video on the timeline you hold down ALT and drag the video from the source monitor over the timeline clip. This doesn't seem to work for video in the properties panel. I can add new video to the MOGR

Out of nowhere I started getting this issue recently and I can not seem to solve it. After importing new videos to any project, audio waveforms do not generate. I read thru the old community post about how to solve this from several years ago to no avail. Extremely frustrated and ready to delete Premiere Pro. Hopefully someone can help me out. Below is the old thread I'm refering to. All those simple things do not solve my problem. I tried new videos, uninstalling premiere pro and installing an older version from months ago and so on. This also started showing up after I noticed I was trying to solve another problem. Audio would work fine and wave forms were still working. After exporting my audio was all robotic and distorted. Went thru changes for that and now I'm here. https://community.adobe.com/t5/premiere-pro-discussions/audio-waveform-not-showing-visually/td-p/10231981

I'm trying to use my Tangent Ripple to control mask positions in Premiere Pro to speed up manual mask tracking adjustments. In Tangent Mapper's effects mode, I can see Position X and Position Y parameters and I've mapped them to a trackerball, but they only control the clip's position in the frame, not the actual mask path position.Is there any way to map mask path position controls to the Tangent Ripple, or does Premiere simply not expose those parameters to control surfaces? It seems like the Ripple only works with Lumetri Color controls by default, but I'm hoping there's a workaround I'm missing.

Hi everyone, I'm currently working on a Production that has been going for two months. I am experiencing some behavior that I haven't seen before, although I'm holding out hope that it's something obvious and simple.I am simpily copying and pasting another editor's Sequences from a different project folder within this big Production into my own project folder. When I try to open the Sequence, it forces Premiere to open totally different and separate projects. I can close them out just fine without affecting anything, but it's become a nuisance on these separate projects opening everytime I'm trying to open these sequences. Is there a reason why these other projects keep opening when trying to view these sequences? Also, is there a setting that I can un-check to stop this behavior?PPro 2025.5.0 (Build 13)iMac 2024 M4macOS Sequoia 15.5

Dear Adobe...I have a problem when exporting...PP 25.6.3Win10 22H2 for workstationNvidia 591.44the exported video is somehow washed out and paler compared to the original, there is no color correction, only a few simple transitions... the video was recorded with a Panasonic CX 350 in HEVC LongGOP format... I would like the exported video to be like picture 1, but it is not... picture 1 is taken from Pp and picture 2 from the exported video (and the original raw video is as in picture one)... what am I doing wrong... here are the other pictures from the settings... thank you...I export the sequence to QuickTime (prores 422 HQ) compare the curtains from pictures 1 and 2...that's where you can see the difference the best...and I would like my exported video to be like in picture 1, the raw video looks like that...picture 1 is taken from Pp from the timeline and the same raw video when I look at it from the player looks like that...it means that everything is fine as far as Pp and the vide

With our production footage & sound, we recorded sound separately (mapped to multiple mono channels), then made multicam clips and edited using the multicam clips.Is there a way to flatten the audio portion of the multicam clips so we get the production audio that's mapped to multiple mono channels? (for turnover to a post sound mixer) 

Having to endure "Relinking Media" 3 minute process every time a project I opened - even though no media has moved. Running 25.5.0(Build 13) on Windows 11.  Media is stored on an EditShare media space with always the same allocated partition letter.  It's quite a pain and would appreciate some insight. 

Hello. I'm working in PP V:25.4.1 (Build 3), in a Production, with a Project that has my sequences, and a separate Project with the raw footage.  I was having trouble putting clip markers on a merged clip in my sequence, so I went up to the Source window and did it from there, with comments, and that seemed to work. BUT the next time I opened the project, most all of my markers were gone (I only had 7 left, out of about 50). I looked everywhere to "re-jigger" the markers but they don't seem to be anywhere. I have other merged clips in different sequences in the same project, where the markers work just fine, but this weirdness has happened in a couple of my other sequences now that I'm looking back. Anyone know why this might be happening, and maybe my markers are still living somewhere!? Thanks! 

My Premirere Pro isn't opening anymore since last week.I can't remember why it stopped opening. I've opened the program (doesn't work), uninstall and reinstall the program, run as administrator, updated driver, installed previous version to use, restarted the computer. All of the possible options and it still doesn't work. What else can I do if it's not working anymore ? I really want to keep using this program for video editing.

This is one of those things where I think, Is it me?I've noticed over months, if not years, that I often have trouble right-clicking in PP and also in AE. Sometimes it works, sometimes it takes one or two clicks to get a contextual menu to show. I find myself pressing very hard to ensure the click registers.When I'm using a mouse, it's a Logitech Master 3S. I don't have issues right-clicking in any other apps, just these two. I don't think I've noticed it in ID or Illustrator, although TBH I don't right-click much in ID and I'm usually on a tablet in Illustrator.Does anyone else have this issue?  Mac OS 15.7.2, PP25.6.3, AE25.6.0

I want to create acceleration in the pan-zoom in my animated still.  I believe I can use Ease-In Ease Out to do this but am not sure how it works.  Screenshot 1 below shows the playhead midway between two sets of keyframes.  Because the animation is zooming in it appears the motion is slowing down but that's because of the change in the number of pixels being covered as I understand it.  I want a constant "speed" between these 2 sets of keyframes.  The same problem exists for the 2nd 2 sets of keyframes to a lesser extent.  I've attached the rendered file.  Thanks for any help.    

Hi guys! I don't know, and I'd love to know why Premiere creates multiple files from the same original file, such as pp1, pp2, or even _2, _3.  Why does this happen?  I take the file from Windows explorer, I put it in Preview premiere windows, and then I take clips from there using in/out points and drag them into the timeline.  I can sometimes see 10 identical files in the original folder, but with different numbers like 1, 2, 3, 4.  Any help, please?

I have remapped 'Mark In' to Opt+Q and 'Mark Out' to Opt+W. This works as intended in the Timeline panel, however in the Source Panel, only I and O will work to mark in and out.  I have also remapped 'Insert' and 'Overwrite', which work perfectly, so confused why markers don't seem to work when remapped. Is there anything I haven't done or can to allow this to work?Macbook Pro 16-Inch 2021M1 Pro Max64GB RAMMacOS Tahoe 26.1

I'd like to just set up on bin with all of the metadata displays I want, order them how i want, then apply that to all other bins in the project, and also make that the default metadata display for all future created bins. Is this possible? thanks

Hi everyone, I run a clothing brand and we create daily performance marketing ads for 100+ products.Right now our team manually edits every product video in Premiere Pro, even though the workflow is the same for all. Our current manual workflow: Import the product video (model wearing kurta set) Make the same set of cuts each time (front shot, close-up, pants, pocket, 3/4th shot, etc.) Add the same callouts/text graphics Add the same music and branding Export the final ad Repeat this for hundreds of products Our Goal: We want a way to automate this entire repetitive process, similar to:Photoshop → Actions + Batch Process What we’re looking for: A script, plugin, or workflow that can: Import a folder of product videos Auto-place them into a pre-built template Auto-cut based on markers Auto-apply callouts (same for all) Auto-export each video to a separate file Ideally using Premiere Pro (since our team is trained on it) Questions: Is full batch automati

Hi everyone,I am experiencing an issue with CEP panel scripting in Premiere Pro 2025 and I would like to ask if anyone else has encountered this problem. I am able to open my panel, and it shows the UI, but it unable to run any JSX script in Premiere Pro 2025—including the official sample scripts. Specifically:1. Running the PProPanel sample .jsx script does nothing.2. Executing my own .jsx scripts also results in no output, no dialog, and no error message.3. Launching ExtendScript from Visual Studio Code using the ExtendScript Debugger extension shows no logs or activity inside Premiere Pro 2025.4. The exact same scripts run correctly and immediately in Premiere Pro 2024 on the same machine. Environment:Premiere Pro 2024 → JSX works normallyPremiere Pro 2025 → JSX scripts do not run at allApple M4 Pro (macOS 15.6)Questions:1. Has Adobe officially changed or deprecated CEP/ExtendScript support in Premiere Pro 2025?2. Is there any new configuration required to enable this?3. Are th

When using the blur effect, FX sometimes gives an error and asks to restart the program.

I am trying to do a series of text that appears on a video as someone is talking. I am using the "band wipe" transition to make the text appear as they talk. The video sequence is in the vertical format (I don't think it's the cause, but making note). Everything works fine...until I move the first line of text to the top - then FOR NO REASON, the band wipe reverses. Instead of wiping left to right, like it does by default and does on all the other text, it wipes right to left. I has not been reversed (I checked that, but even if it was that, why would moving the position up do that?)  It seems it is impossible for me to have the text at the TOP of the video and have the band wipe work left to right. I'm so frustrated! This should be the most basic video EVER, but I am about ready to toss the computer off the balcony. Anyone have any ideas how I can fix this? And, no I cannot just move the text down - I need it where I have it. Thanks.

A new update version 25.6.3 has been released. What are the new features in this update? Did they fix the bugs that came in 25.6? Is it safe to update? I haven't seen any information about this update yet. I'm still downgraded to 25.5 and I'm afraid to update because it might still have the same bugs as 25.6. Any information would be appreciated.

Just updated to PP 25.6.3 and adter exporting 2 videos the playback is stuck on the first frame meaning the ENTIRE video is nothing but the 1st frame also, crashed twice. Look, I was elated when Adobe included Film Impact. those tools are awesome and save me time and work but OF COURSE a new update means new issues. The footage is DJI MAVIC 3 4k H.265 editing on a M4 Macbook Pro with the Pro chip. Come on Adobe!

i have a project with hundreds of dissolves i need to import all of the timeline into after effects to work on each clip.right now cross dissolves doesnt not cross over to after effects as opacity keyframes.i`m looking for a work around here, because manually doing so to each layer is literally totureany ideas ?

Hi, I'm using export-with-bins in "Automation Blocks" but I want to have the captions in the export.How can i activate the captions? Thx Stefaan

I have over 20 apps available in my iCloud Pro. I pay $99.98 per month. I have been a loyal client of Adobe for 18 years straight. The only 2026 app providing me availability to my apps is Photoshop 2026. None of the others will download to my Macbook Pro. My current Mac OS is Tahoe 26.1 Now, today (for hours) I have re-installed iCloud Pro.  I have cleared and cleaned my Mac Harddrive. Still the apps will not download. I strived to get Human Tech Support. I was told @ 4: 12 PM EST that a person will be with me shortly. I waited, waited, waited. and waited for 1 hour until 5:12 PM EST. No one ever connected for chat. How discouraging and disappointing to be ignored by such a huge worldly firm.Anyone have a thought that may help me get the products onto my computer Adobe iCloud Pro? 

Hi I am new to autmation blocks. I have a long editing on premiere and need to apply random zoom to my cuts so that the editing is slightly more dynamic.   Do you think is it possible to create a script that do the following?     1. we choose if we want to apply zoom in, zoom out and no zoom as parameters (we can apply all of them or only 1 or 2) 2. we select the intensity of the zoom (that need ideally to be constant) 3. the script applies randomly the zoom script to all the clips of the timeline. 4. we select a sequence and we run the script.   Does it make sense? Thanks Luca