Bug Reports

Hola, tengo problemas con el premiere. Estoy con la última versión. Se cierra repentinamente o cuando quiero exportar, durante el proceso se tilda y cierra.También falla al exportar mediando adobe media encoder.Ya probé liberando caché, cambiando el GPU de renderizado, actualizando Windows, actulizando los controladores de la placa de video, reinstalando el priemiere. 

Hello.Fit to frame not working properly. Yes, FIT TO FRAME is selected BEFORE importing the clips.When I select an in and out from the source window and drag the clip without sound, the fit to frame feature works and the clip stays at 50% (FHD sequence with 4K clips), if I drag the clip together with the audio the clip doesn't fit to frame ands stays at 100%.This is ridiculous everytime a new CC comes out something is broken that wasn't before.CC2025Macbook pro m3 max

When "Show Audio Time Units" is enabled in the timeline, the Control+K shortcut does not cut at the sample level. Instead, the cut snaps to frame boundaries. However, using the Razor (Blade) Tool allows accurate sample-level cuts as expected.Steps to Reproduce:1. Open a sequence in Premiere Pro.2. Enable Show Audio Time Units in the timeline.3. Zoom into the waveform to confirm sample-level visibility.4. Place the playhead between frames (not on a frame boundary).5. Press Control+K to add an edit.Expected Result:Control+K should create a cut exactly at the playhead position on the sample level when audio time units are enabled.Actual Result:The cut snaps to the nearest frame instead of cutting at the precise sample location.Additional Notes:The Razor (Blade) Tool cuts correctly at the sample level under the same conditions.Audio and video tracks are unlinked.Snapping is disabled.Attachments:1. Screenshot showing Control+K cutting on frame boundaries.2. Screenshot showing the Razor Tool

IssueClicking the "fx" toggle button on a clip causes the Effect Controls panel to turn black and reopen in a new tab.Steps to reproduce Open a Premiere Pro project with clips containing applied effects Select a clip on the timeline with effects applied Verify that the "Effect Controls" panel is open and visible Click the small "fx" toggle button on the clip (to disable/enable effects) The Effect Controls panel turns black/becomes unresponsive The panel closes and reappears in a new tab instead of returning to its original position Expected resultClicking the "fx" toggle button should only disable/enable the effects on the clip. The Effect Controls panel should remain visible and functional in its original position.Actual resultClicking the "fx" button causes the Effect Controls panel to turn black, close, and reopen as a new tab. The panel becomes unusable until it's manually closed and reopened.Screen recordingAdobe Premiere Pro version26.0 build 72Operating systemmacOS 26.

We have an UXP plugin that creates a connection with a remote server. In doing so, we need to open a web page for login. Premiere opens an Permission Dialog to request permission to open that page...but the displayed dialog has a faulty rendering of :the explanation text the action buttons (Allow | Block)These are unreadable because of color (dark gray over a black background) and placement (no border for the buttons, incorrect spacing).The dialog is therefore unusable. Even worse, if the user clicks by mistake on the Block button it will be hard to recover.This is the dialogDialog with arrows showing the hard to read text and buttons After some photoshop on this image, the button are easier to read… This is currently a blocker for our plugin

HelloI’ve been getting these Frame substitution and error retrieving messages on my Premiere Pro. My Premiere Pro version is 25.6.2,. The footage is the A roll which I cannot remove and which has never before troubled me. I’ve tried deleting cache, creating a separate sequence, restarting Premiere Pro but nothing works.Is there a way to solve this problem? Updated it to 26.0, still doesn’t work.Attaching a screenshot 

I edit with split timelines (Top timeline holding a number of source sequences and bottom timeline holding program sequences) and have been doing so for years in Premiere. Update 2026 is freezing some of the source sequences intermittently when clicking between them and I have to close and re-open them to access them again. Not a major issue but a noticeable bug since the new update.  

Issue: Ripple Trim (Q/W) shortcuts are not functioning on the Subtitle/Caption track. Steps to reproduce: Create a separate Subtitle track in the timeline. Position the Playhead over a caption clip. Press 'Q' or 'W'. Expected result: The caption clip should be trimmed, and the timeline should ripple accordingly. Actual result: No action occurs on the Subtitle track unless a workaround is applied. Workaround found: The Ripple Trim tool only functions on the Subtitle track if an Adjustment Layer of equal length is created and perfectly aligned with the caption clip on a different track. Adobe Premiere Pro version: 26.0. Operating system: macOS Tahoe Version 26.2. System Specs: MacBook Pro 16-inch (2023), Apple M2 Pro, 16 GB RAM. Video format: Issue is isolated to the separate Subtitle/Caption track. Comparative information: The tool requires a parallel Adjustment Layer to trigger the ripple effect on captions. This behavior is consistent across all

Seit letzter Woche kann ich mein Premiere Pro nicht mehr starten. Der Loading Screen öffnet sich und dann erscheint plötzlich das Fenster bezüglich unerwarteter Fehler und Dump File anzeigen usw. Verschiedene Dinge habe ich bereits probiert:alles deinstalliert, komplette CC deinstalliert, Premiere Pro neu installiert mit ALt Tast beim Start in die Optionen und alle Profile und Daten gelöscht eine ältere Version installiert (25.3, 25.6) sämtliche Grafikkartentreiber geupdatedIch habe keine Ideen mehr und benötige dringend mein Adobe Premiere um mein Projekt zu beenden. 

Speed / Duration - unable to change by entering speed % or by using the slip tool. The speed % dialog box accepts the new value, when I click ok or enter it returns to 100%. The slip tool doesn't maker any adjustments whatsoever, either trying to stretch or shrink the clip. I have restarted, checked all updates and problem persists.

Issue Description:While editing a video, if I mute an audio track (using the Mute button on the track), and later unmute it, the audio plays briefly but then gets muted again automatically without any user action.Even after manually unmuting the track, it continues to mute itself again during playback.Steps to Reproduce: Open a project in Adobe Premiere Pro Add a video/audio clip to the timeline Mute an audio track using the track mute button Unmute the audio track Press play The audio becomes muted again automatically without any interaction Expected Behavior:After unmuting an audio track, it should remain unmuted and play normally unless manually muted again.Actual Behavior:The audio track automatically mutes itself again after unmuting, without any action from the user.Additional Notes: This happens repeatedly The issue occurs even when no automation or keyframes are applied It significantly disrupts the editing workflow Please let me know if you need any additional de

Hi - I've been plagued by this across many different projects now. At first I thought it was potentially tied to the Production environment, which I've been kicking the tires in the last few weeks, across 3 different Productions. But today I can confirm that is not the case as I'm in a regular project, outside of Production, and I am experiencing the problem... Enter Export menu with your sequence (via CTRL+E hotkey in my case)Grab Adobe's PR4444 presetExport via AMEInspect your clip in another player or re-import in Premiere: video is black, audio is ok.Export via Premiere Pro: your exported clip is fine. Sequence resolution is UHD, 30 fps. Fairly straightforward edit made of one main video track (sources are UHD.mp4), 1 layer of a black slug acting as a mask for one 1 layer of mogrts. I tried enabling/disabling the Max bit depth and Max quality settings thinking that was the issue initially, no change. Switch to other ProRes or H264.mp4 codecs, no issue, all is well.The "fi

Is it just me that pays attention to such things or is this problem simply ignored - has been for years, a decade probably?This is just a layer (clip\mogrt) - it’s reversed and time-remapped. This is what happens when you adjust the remapping curves to slow the part further: Can anyone tell me where is logic in that? Why is slowing down the end of a reversed clip makes it longer but when you do the same with the beginning, the whole clip shortens to the extend that it can sometimes not be seen at all? There’s nothing in front of the clip. I sow this in Pr 10 years ago and this still isn’t fixed...   

Even though you've stated that a fix has been released and optimized to work with the Blackwell architecture, something is wrong. Nothing is working as it should: slow export performance, the program crashes, and various other bugs. These problems aren't just affecting me, who has mid-range 5060 Ti and RTX 5070 cards, but are also affecting users who have RTX 5080 and 5090. Before, I edited with an RTX 3060; I even edited up to version 24 of Premiere on it. When I switched to the RTX 5000 series, I was already using the new versions 25 and 26 of Adobe Premiere. I, like most editors and cinematographers in the mid-range, use cameras that have AVCHD H.264, MP4, MOV, MXF, AVC, and H.265 codecs. I hope that you at Adobe will strive to correct these deficiencies. I have a huge regret in having migrated my system to RTX 5000 cards with a lot of features, but for my editing use they don't work well in Adobe Premiere, a program I've been editing with since CS6.

Issue - Newest version of Premiere Pro lags and doesn't work smoothly with proxies (as shown in the attached screen recordings). Steps to reproduce - Create proxies, toggle them on, and observe how the timeline performance is slower than it should be. Expected result - It should be way smoother, as shown in the screen recording (attached) of the older Premiere version. Actual result -  Way slower than it should be, timeline performance is bad. Adobe Premiere Pro version - Version 25.2.3 Operating system - Windows 11 GPU driver version (Windows only) - Nvidia Studio Driver 576.02 Video format - XAVC-SH 4k 59.94 fps from Sony FX3 Comparative information helps us understand more about when the issue occurs:  Does it affect all projects or only some projects? It affects all projects. Does it affect new projects? Yes. When did the problem begin? Newest version of Premiere (version 25.2.3)   I've attached vi

Issue: All Masking tools (Object, Ellipse, Rectangle, Pen) are completely non-functional in v26.0. Steps to reproduce: Place a White Solid layer on the top track and a Black layer on the track below. Select the White Solid layer and go to Effect Controls to create a mask (e.g., Rectangular Mask). Attempt to apply or adjust the mask on the Program Monitor. Expected result: The White Solid layer should be masked/cut out to reveal the black layer underneath. Actual result: No masking effect is applied. The white layer remains solid and fully visible across the entire frame, despite the mask being active and listed in the Effect Controls panel. Screen recording: https://drive.google.com/file/d/1e4G8IuxjfjYLfaD1DTNwwWUxnRa6qYb0/view?usp=sharing Adobe Premiere Pro version: 26.0 Operating system: macOS Tahoe Version 26.2 System Specs: MacBook Pro 16-inch (2023), Apple M2 Pro Chip, 16 GB RAM.

Hi everyone!I have a weird problem: My export window does not open anymore. All projects are affected.I made sure that the timeline panel is selected while clicking on export. I tried the shortcut, the context menu and just nothing happens. When I click on the tab “Export” the loading animation just goes on forever.I tried to reset all settings and workspaces. Then I uninstalled and installed multiple older versions.Now I am completly out of ideas and any help would be apreciated! My PC specs:Intel Core i7 14700KNVIDIA GeForce RTX 5070 Ti64 GB DDR5

Hi I'm running into an issue where Premiere will start running slow and lagging the responsiveness will come and go and the only way to regain control is to restart the computer,. I'm still able to perform tasks , but the response is very slow even tasks outside of premiere.any other programs while Premiere is closed like  After Effects, Illustrator, or even Photoshop will work normally without any hiccup. I recently updated from Windows 10 to 11, Installed additional RAM to get it to 128GBI use Suite studio  within my work flow, but i've also experience the problem working locally. Basically i will be working on an edit as simple as thisand still have the program and computer freezing up. when ever i'm not running Premiere the computer runs fine i've ran some test on it and there were no hang ups from testing the system out.Here is an example of what's happening. https://vimeo.com/1079549757Screenshot Examples: Syetem Setup:Operat

Adobe 2026 crashes when I launch a project that uses 6k BRAW footage.   I downloaded the latest Blackmagic Raw plugin since I updated Adobe Premiere to 2026.  It won’t load my project unless I disable the plugin. I already created proxies of this footage in the 2025 version of Premiere, but now it won’t relink to the BRAW footage and only uses Proxies. Operating system – Apple M2 Max  OS Sequoia 15.7.3

Bug report attached

Built the ExporterSDK example plugin from Premiere Pro SDK 2026 WIN on Visual Studio 2022 (v17.14.25) with build tools v143.The plugin fails to load on both Adobe After Effect v26.0 and Adobe Media Encoder v26.0.From the logs:Loading C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore\SDK\ExporterSDK.prmInvalid registry entry found so the plugin will be loaded from disk.Loading from disk...The library could not be loaded. The error code: 2685337601

I would usually let the video to get auto-transcribe, and it would usually takes a lot of things wrong in the desktop app (as a sidenote, the mobile app seems to be more accurate with trascription). I would then go to change the transcript as I am watching back the footage, so getting each caption into the edit mode, editing and clicking away is very quick (I am trying to be fast with this part, because it is very tedious).  Sometimes, I would that upon clicking away, the last word (or sometimes the first word) of my transcript would go away. I do not understand why it happens, if I have just typed it. I would go back and add it again. so I effectively did this work TWICE already. That as I am happy with the transcript, I would go ahead and generate captions from it. As I am watching the video back with captions, I would see that the first and last words are missing AGAIN, so I have to do the same work with missing words three times, and typing them manually three times.

EnvironmentPremiere Pro Version: 26.00 (Build 72) Also affected: All 25.x versions, latest beta versionsOperating System: Windows 11 Education 24H2Hardware:CPU: Intel i9-12900KRAM: 64GB DDR4 (52GB allocated to Premiere, 12GB reserved for system)GPU: NVIDIA RTX 3080 10GB VRAMGPU Driver: NVIDIA Studio Driver 591.74Cache Drive: Dedicated 450GB SSD for Adobe cacheDisplay Setup:Primary: 4K @ 120Hz, 125% scalingSecondary: 1080p (scaled to 2K via NVIDIA Control Panel) @ 144Hz, 75% scalingG-Sync/FreeSync: DisabledPremiere Settings:Renderer: Mercury Playback Engine GPU Acceleration (CUDA)H.264/HEVC Hardware Acceleration: EnabledSequence: 1920x1080, 25fps, GoPro CineForm YUV 10-bitProblem DescriptionWhen working with text, captions, shapes, or any vector-based graphics in complex projects, the GPU immediately spikes to 100% utilization (specifically "3D Compute" in Task Manager) along with maxed dedicated VRAM. This spike either:Persists at 100% until Premiere Pro is restarted, ORDrops back to n