Questions

I am not sure if I have corrupted footage or if its a bug but I keeo getting notification in PP and when exporting it says it cannot export and it is aslo saying Source color space ((rec.2100 HLG) cannot be exported with current settings of selected format! I have cleared cache, updated software and laptop, rendered all footage, and it still fails about midway when exporting 

Hi,Starting this week when I send items to the render queue or try to create a proxy from within Premiere Pro nothing shows up in Media Encoder.Media Encoder opens and the dialogues in Premiere all show up as expected but nothing is added to the queue.However from After Effects selecting Export > Add to Adobe Media Encoder Queue... the selected composition is added to the the queue.I can add to the queue directly from AME by Adding Source or Adding Premiere Pro Sequence, I just can't add to the queue, either as an export or create proxies, from within Premiere Pro.This is very frustrating. The only thing I've found in these forums which seems to describe my issue says, 'after a time it fixed itself' which is extremely unhelpful.I've tried clearing all the caches, uninstalling (from the CC app) individual applications, restarting, and reinstalling. I've tried uninstalling the whole CC suite and reinstalling, to no avail.If anyone has any ideas I'd welcome them,Thanks.VersionsAdobe Me

Hello,    I recorded a few files using the new H.265 codes on my Atomos Ninja V and I encountered some difficulty trying to open them in Premiere Pro. As soon as I try to load the file in my timeline, the entire app crashes and quits (see attached photo). Has anyone experienced this before? Is there a workaround I can use in the meantime just to get these clips cut and edited? I am running Premiere Pro 23.3.0 (Build 61), which I believe is the latest version of Premiere.    Thanks.

Recently, I switched from an RTX 3090 to an RTX 5080, mainly because of 10-bit support, as I work with this kind of footage on a daily basis. After installing the card, I did a test render and found that render times were 6–7 times slower than on the 3090, which was really weird. I tried everything I could think of to fix it, and I even formatted the C drive, but nothing helped. In general, Premiere Pro (26.0.2) uses only about 5% of the encoding capacity, while an older version, such as 25.2, uses about 11–12%. I also tested HandBrake, and there the GPU was being used to its full potential. The same raw clip took about an hour to render in Premiere, while HandBrake finished it in 7 minutes. Timeline performance is also significantly better on the 5080 than on the 3090, and I pretty much no longer need proxies. However, when it comes to final rendering, my iGPU can now render faster than the 5080. Do you have any idea why that might be?Specs:CPU: i9 13900KRAM:128GB DDR4 3600 MHzGPU: RT

I’m using Premiere Pro 26.0.2 and I’m running into a workflow issue with the Project panel.In previous versions, when I clicked or opened a bin (folder), it would open in a separate panel/tab, allowing me to have multiple bins open at once (for example: 24fps footage, 60fps footage, audio, titles, etc.).Now, when I click a bin, it replaces the current view in the same Project panel and shows a back arrow at the top. I can no longer have multiple bins open simultaneously in separate panels the way I used to.Also, when I right-click a bin, there is no “Open in New Panel” option available.This is a major workflow slowdown for organizing and accessing multiple bins at once.Any help would be appreciated.

In pro 6 - I am able to create my inital mask at lets say 0 secs to 30 seconds on the clip, then 31-60 seconds I want to do a different mask. I could do this easily in premiere pro 4.   Where I can have different masks through ut a sequence.  But now in pro 6 - the 2nd mask is not taking. It shows it the effect window as implremented, but in the preview window, it does not show the mask in display why is this in prem pro 6

Premiere Pro 2026 no me deja usar la herramienta de máscara de objeto porque no me descarga los Machine Learning Models. He reiniciado, me he deslogueado y nada... sigue dando error. Tengo más 100GB libres en mi ordenador. Cómo pudiera forzar esa descarga para que me funcione la herramienta? 

自分でプロジェクトを作成したときはA1やA2ですが、クライアント様から共有されたプロジェクトでは全部Uでした。これは何を意味しているのでしょうか。追記：また、自分がA1からUに変えたいときはどう操作すれば変えられますか。 

Hello everyone,I need your help since I'm experiencing many problems with Premiere Pro on my Macbook Pro M3 Max 48GB. - All footage is on an SSD- Project files on computer- Media cache goes to one folder on the computer- Ram stored for Premiere is 48 GB- Sequence Settings (it's the same with all sequence I tried):DSLR1080 x 192029,97 fps48000 Hz - StereoWorking Color Space: Rec. 709 Attached an example.What can I do? I tried to import the same media on DaVinci and it's sooo fast, however I would not like switch the software.

En las ultimas actualizaciones de premiere he tenido problemas al exportar videos largos, he tenido que exportar los videos por parte y unir en otro programa, alguien sabes las razones del problema, tengo un macbook pro m1Saludos

Hi!I am running Adobe Premiere Pro 2025 on my Mac M1Max Sonoma 14.6.1 (23G93).Out of sudden, the program crashed and after re-opening it, this error notification popped up. I am using the Dehancer Pro plugin to color grade my footage and the plugin is no longer usable in Premiere. I've tried uninstalling and re-installing Premiere. I've tried reinstalling Dehancer as well us upgrading and downgrading to newer versions and nothing has worked so far.I am working on a time critical project where I need to be able to use the plugin. Does anybody have any solution on how to find a workaround for this "Video Filter Missing" issue?Thank you!

Anytime I create a multicam sequence and try to color correct within the multicam sequence, after a few adjustments the lumetri window grays out and I cannot make any adjustments. If I embed the multicam sequence within a new sequence I can make adjustments all day long with no issues. But, again, when I go into the container that holds the clips, after a few adjustments I can no longer use lumetri. It grays out. Here is a video I made showing the issue. https://www.dropbox.com/scl/fi/452t8md7stqtmc9e7wc6r/20260309_143620.mp4?rlkey=5ar6y395g1ois9kcpxh6uq3qh&st=j58revyu&dl=0This has been going on for at least six years. I've seen other posts but no one can find the problem. Adobe will You please finally do something about this? COMPUTER SPECS:Processor    12th Gen Intel(R) Core(TM) i9-12900KS   3.40 GHzInstalled RAM    128 GB (128 GB usable)System type    64-bit operating system, x64-based processorBaseBoard Product    PRIME Z690-PGPU   NVIDIA RTX A4500

Hello everyone, I recently started working with Adobe Premiere Pro again and I’m having an issue with my old masking workflow that no longer works. Background:I recently rebuilt my PC (new CPU, motherboard, GPU, clean Windows install). Since then, I can’t recreate a workflow that used to work perfectly before. My old workflow: Static image on V1 Video overlay (e.g. rain, fog, light effects) on V2 Blend mode (e.g. Multiply / Screen / Overlay) Then I used Opacity Masks to draw a custom mask directly on the overlay, so the effect was only visible in specific areas of the image  The problem: The mask tools (Pen / Ellipse / Rectangle) either don’t appear or don’t work as expected Masks don’t affect the overlay anymore Even when a mask is created, it doesn’t clip or limit the effect like it used to This happens with simple image + overlay projects as well  What I already tried: Reset Premiere Pro preferences New project and new sequence GPU acceleration ON (Mercury Playback Engine GPU) Diffe

I record video and audio from my VR headset, I also record video and audio from my desktop.This works fine, as the main audio is switched from headset to desktop automatically when the headset is off. And my 1st microphone is the VR mic. However I wanted to record audio from my headphone mic. while recording a regular 2d game. and I can not get the mic audio into the premiere pro, first it didn’t want to add the 3rd audio line, but even when I have opened up a 3rd audio channel, there is no recorded audio there, the mic is picked up by OBS. But can’t get PP to show the audio line in the editor. 

The APIs that allow a GPU accelerated effect to extract its start and end PrTimes on the timeline are inaccessible when the plugin is applied to an adjustment layer. There appear to be no other methods to extract that information, and this makes certain plugins unable to work correctly when applied to adjustment layers. (This bug refers to plugins based on the AE SDK that implement the Premiere Pro extensions for GPU acceleration.)   Steps to reproduce: - Take an existing AE plugin that implements the necessary Premiere Pro SDK extensions for GPU acceleration. - When the GPU effect instance is created, extract the start and end times (in ticks) of the underlying video clip using this sequence: Call PrSDKVideoSegmentSuite::AcquireOperatorOwnerNodeID() passing in the effect’s node ID as received in the PrGPUFilterInstance->inNodeID structure to get the node ID of the clip the effect is applied to. Call PrSDKVideoSegmentSuite::GetNodeProperty() on the clip’s node I

where did the masks functions move in the latest update? I need to create custom shape masks, not just cropping - - and that option seems to have disappeared. 

 Old workflow (p for pentool, h for moving the frame, select again with p) is gone, new one n.e., my daily mask routine takes now 2-3 times longerno overlays, edges or anchor points showingoverall very buggy and massively counterintuitive WHY did you do it?  

Premiere 26.0.1 : le menu “Effets video” est partiellement en français (certaines fonctionnalités sont en anglais). 

Guys how is possible with a 128gb ram macbook pro and premiere playback still terrible? Or i still have to use a gamma compensation to match what im editing with the export? like seriously.. Im a loyal customer since years and years, but im getting tired of dealing with bugs all the time, this editor job is already very frustrating at times, and WE the customers need a smooth workflow. Is insane that this bugs still here after years for the prices that we pay monthly. again INSANE.

After exporting my edited film in Premiere Mobile colours look much darker. Why is that?I used: iPhone 15 pro, filmed with Apple log, latest IOS versionI tried different clips and always it looks darker after export. As soon I do not any grade on the clips everything looks fine and identical between app and exported file.

Hit a snag on a project today that I've never seen before.   The overlay on my sequence for my sources show one timecode but when I match back to source file it's a completely different timecode. For example, my overlay is saying the source timecode is 00:29:41:10 but the actual source timecode is 12:34:29:03.  I'm working with merged clips but I also tried with the original raw files and was running into the same issue. I'm working on the most recent version of the software.

Hello, I just updated to Premiere Pro 2026, and now whenever I add a preset to a clip, the focus switches to the Program Monitor or Effects Panel. Because of that, I can’t zoom in or out in the timeline using + and -. Instead, it zooms the small ruler/timeline under the Program Monitor.It’s pretty annoying to click back on the timeline every time I add a preset just to be able to zoom again, especially when I’m quickly going through a sequence adding multiple presets.Is there any way to stop this behavior or keep the focus on the timeline?

The new mask tool is goo and awesome when it works and you do not need to do anymore, and to do masks of humans and objects inside premiere, but when you need to do your own mask, or arrange track position, change path, I simply can not do that anymore, it’s a mess. and happens a lot when visuals change angles, scale, size, rotations. terrible.