Photoshop

Hi,  I'm trying to find a way to quickly, thru Generative Ai or other, in PhotoShop, replace a blown out interior window, with a properly exposed window; basically the same two shots on a tripod with no movement, only one shot is well exposed for the interior of the room, and therefore the window is overexposed, and the other shot is underexposed for the interior of the room, but the window is properly exposed. In the past, I would manyually layer the good window in place of the poor one, but I assume Ai has a quicker solution?  I see Imogen has a solution, but it seems not to be very well done yet, at this point.  Please advise...

I'm new to using paths and the pen tool, can somebody explain to me how I can fill a path with a pattern on a new transparent layer, rather than a solid background? This is my problem. Thank you!

Why does Adobe Photoshop suddenly exit by itself and lag after updating? I have sent a message from Adobe Photoshop error

Hi all,I often use the Image>Adjust Variations option in Photoshop but do not see the option in Photoshop CS6. I know we are still only in the BETA stage but I am still curious. I hope it is not going to be dropped. I like to use it for quick fixes on small portions of the image every now and again:)Thank you in advance for your help,Christine

I recently installed my copy of Photoshop CS5 on my new Windows 10 computer. I deactivated my copy on my old Windows 7 computer. My copy was an upgrade license from CS4 to CS5. I think I messed up the install because when it asked for the license key, it just accepted the CS5 license and did not ask for the CS4 base license like it had done in the past.   Now I cannot update my copy to the latest patches, as such, I cannot get the RAW format to work with my camera in Photoshop. When I try to update, Adobe Application Manager downloads the file but says "There was an error downloading this update. Please quit and try again later." The customer support link that shows with the error says 'Upgrade error: "This serial number is not for a qualifying product"'.    I tried to uninstall Photoshop with the WinCS5Cleanupscript that Adobe provides, but after re-installing I still have the same problem. Any thoughts?

I have a brand new PC (Ryzen 7, 32GB RAM, NVIDIA RTX 5060). Everything works perfectly, except when I try to use the "Skin Smoothing" filter (the neural filter) in Camera Raw. The moment I apply it, the screen flickers, Photoshop freezes completely, and then I get a message saying that "Camera Raw GPU acceleration has been disabled due to an error."   I've tried everything: I reinstalled the NVIDIA drivers (using DDU, and tried Studio and Game Ready). I ran a stress test on my graphics card (Unigine Superposition in 4K), and the card is 100% perfect. The problem only occurs with that filter. If I disable GPU acceleration in Camera Raw's preferences, it works (but slowly), so it's clearly a bug. Is anyone else with a new card (RTX 40 or 50 series) experiencing the same issue? It seems like a bug in Adobe's software with the new hardware.   [Mod: Reformatting thread for better readability]  

Since Adobe updated the Photoshop app, I noticed the font of that logo has changed. What font does Adobe use for the new Adobe Photoshop logo?

Hi everyoneI have found an old family archive of photographs which I'm wanting to digitise, enhance, possibly colour and print out for Christmas presents (yep, this is a long term project!). I'm a bit stuck at the first stage and could use some advice.When I scan the pictures using an Epson V700 scanner, though it's capturing all the detail which is great, it's also capturing dust and scratch marks on the picture and particularly irritatingly dust and lint marks that are trapped under the scanner glass!I can't take apart or clean the scanner glass so those marks are transferring to the scans I'm making.It will take (and is taking) hours to painstakingly remove all these marks by hand with the spot removal tool and I was wondering if there was anything automatic that was more effective?I have tried...Photoshop - Dust and scratch removal tool - it doesn't do a great job as it just blurs the picture, or otherwise adversely affects the picture which I don't want.Lasersoft Photoshop SRDx Pl

I have a hi-res image of two people wearing glasses. When I use the select tool, it's not grabbing the glasses on either person. Not listing glasses as a choice, either. (Haven't seen it do that before.) Using Photoshop 2026 v27.0.0 on a Macbook Pro M4. Suggestions? Bug?? (I blurred their features for privacy issues to post here.)

I need to change the background color of a PNG image that has only one layer, using PhotoShop 2018. You can't select everything else and mask it because it's a very complex image, and the Spot Healing Brush tool doesn't seem help much because the color I'm trying to change is very subtle and only appears in certain areas. There must be an easy way to just change the entire background color, but I have yet to find it. Can anyone help?

This is a minor annoyance that still hasn't been resolved, but the filter gallery effects always appear ungrouped in the filters tab every time I open Photoshop. The annoying part is that it does this even when I have it checked to group them in the plugins settings. I have to uncheck and then recheck it for them to group up every time I have to reopen the program. Can someone fix this, please?

I find myself using the same points whenever using the curves dialogue box.Is there a way to place these points in a default setting so I don't have to manually input them each time?

bjrdepuis que j'ai chargé la  nouvelle version de PHotoshop, elle se bloque.

I'm having an issue with Photoshop 2026 (27.0.0) hanging after rendering a movie. The movie renders ok, but the 'blob' spinning cursor just spins forever. The app isn't being reported as 'non-responsive' in the macOs 'force quit' dialogue, but it never comes out of this state and requires a force quit to do so. I'm on Tahoe 26.0.1

Good afternoon hive mind, Have posted before but haven't found a solution. I have Photoshop 2026 installed on my laptop. The program runs fine and I can open all file types.HOWEVER .... I cannot open Photoshop by selecting any files. And if I try the 'Open With' option, Photoshop does not show up as normal. In the list of available option there is a Photoshop.exe but clicking on it does nothing. If I try and set Photoshop as the default program to open picture files it does not show up.If I click on installed apps ... it's there. Am really confused and if someone can help I would be eternally grateful. Thanks Colin

Hey, are you trying to make a magic trick or are you just trying to spell us?  I use: After EffectsPremierePhotoshop a lot!  And you know what make me crazyyyy The layout and position of the shortcuts menu (and the way you edit it)  Would it be an insult if we could normalize this?  In After Effect and Premiere you can search for the short cuts > but in Photoshop nooooo Why is that? In photoshop its under the "edit Menu"In premiere under the "Adobe premiere Menu" (why?) Ok in AE its und Edit too These 3 Apps will be used together, so why is it that they are on different locationsAnd work in different ways.  To me this makes no sense.  But if this has a good explanation: I am willing to read.  cheers Peter 

Photoshop v26.10 , filter gallery doesn't work. How do I solve this?

Generally I've had good results producing images in Firefly when using an Alpha Channel. Some results are great, some results are very strange and not useable.. Overall, however,  I am pleased.  I have a large catalog of high res images that I have created over 5 years for the "POD" market, I often prefer to use the Edit>Generate function with these images converting the image to either a watercolor or oil painting. The result: every generated images has "lines" similar to what one would get using a rake brush. The Landscape image is a good example. I cut out a small section of this image, original size: 12000px X 9000px @ 300 ppi, showing an example of the lines running in all directions. The reference style and composition images I load do not have "lines" resembling the resulting images in either a watercolor or oil painting.  The algorthym(s) used in Firefly 3.0 are generating these lines.  Today I created a 3 color flat image. It has no textures or

V27 on iOS Sequoia M1 MacBook Pro The move tool auto select is only selecting the top adjustment layer which makes the tool useless. The keyboard shortcut to toggle auto select on/off doesn't work, either. Everything is working correctly on my windows machine. All the settings appear to be the same. Any suggestions?

Hi, I use tool presets to select my tools (I never use the brush panel)After I select a particular brush, and then use it for a few minutes, sometimes I forget the name of the brush preset I'm using, so I got back into the tool presets window to see if it's still highlighted, but it isn't.  I've looked everywhere else to see where I can get the name of the current brush (which was seleted via tool presets panel, not brush presets panel), but I can't find it anywhere. Surely there has to be a way to do this? If anyone knows that would be great (I'm hoping this is a simple solution that I've overlooked )

Bonjour à tous, J'ai un souci avec les filtres neurals dans l'outil de restauration de photos. À chaque fois que j'essaie de l'utiliser, j'ai un message d'erreur qui s'affiche : "Nous avons temporairement désactivé ce filtre en raison d'une erreur". Est-ce que quelqu'un sait ce que cela signifie exactement ? Est-ce un problème côté serveur, un bug, ou y a-t-il quelque chose que je peux faire de mon côté pour le résoudre ? Si vous avez déjà rencontré ce problème ou avez des conseils, je suis preneur. Merci d'avance pour votre aide ! ___________________________________________________________________________________________________________________________________________ Hello everyone, I'm having an issue with the neural filters in the photo restoration tool. Every time I try to use them, I get an error message saying: "We have temporarily disabled this filter due to an error." Does anyone know exactly what this means? Is it a server-side issue, a bug,