Photoshop

My healing brush and paint brush suddenly have refused to drag so I can no longer drag it along a highline wire to get rid of it. I can only use them to dab one spot. I did nothing to change the settings. Any ideas?

I updated my OS and Ps yesterday and none of my actions migrated to “your” actions.  It’s completely empty

Can you open and edit images from the Sony A 7r VI on an iPad Pro?

ProduktinformationenProdukt: Adobe Photoshop Version: 27.7 Betriebssystem: macOS 26.5.1 Hardware: Apple Silicon Eingabegeräte getestet: MacBook-Trackpad Externe Maus Dokumenttyp: RGB, 16 Bit/Kanal Problem tritt sowohl bei aus Lightroom übergebenen Dateien als auch bei direkt geöffneten TIFF-Dateien auf FehlerbeschreibungNach dem Anlegen einer Schwarz-Weiß-Einstellungsebene in einem 16-Bit-RGB-Dokument funktionieren die Maus-Drag-Operationen in anschließend angelegten Gradationskurven- und Tonwertkorrektur-Einstellungsebenen nicht mehr.Die betroffenen Bedienelemente können weiterhin angeklickt und ausgewählt werden, lassen sich jedoch nicht mit der Maus verschieben.Die Funktionalität der Einstellungsebenen selbst bleibt erhalten:Numerische Eingaben funktionieren. Punkte der Gradationskurve können per Tastatur (Pfeiltasten) verschoben werden. Das „Hand“-Werkzeug innerhalb der Gradationskurve funktioniert. Die Regler der Schwarz-Weiß-Einstellungsebene funktionieren weiterhin normal.Rep

I am constantly plagued with this error message during normal working practices within Photoshop.“Could not complete the command because of a program error (2a135c.901).”During normal operation I’ll select any tool and it will randomly stop working - prompting the message above.  Or I’ll run an action and it will fail and prompt the same message..On a Save, Restart - Photoshop is back to normal operation - tools, brushes work correctly, actions play, until the message randomly appears again and the loop continues. save , restart …The pop-up “Learn how to fix” is irrelevant. It’s not a fix!I’ve tried all the other recommended fixes below to no avail. Please advise? Resetting Photoshop preferencesDisable GPU AccelerationGo to Preferences → Performance.Uncheck Use Graphics Processor.Restart PhotoshopClear Adobe CacheNavigate to ~/Library/Caches/Adobe and delete cache files.Restart PhotoshopMac Studio M2 Ultra, 64 GB - macOS Terrible-Tahoe 26.5.1 - Photoshop 27.8.0Wacom Tablet Intuos Pro (

Zooming past 50% causes severe glitches (colored blocks/lines, see error1.png vs error2.png). Started ~10 weeks ago after update. Affects multiple similar files. Older versions work fine.

Adobeサポートご担当者様お世話になっております。Photoshopの起動に関して不具合が発生しているため、ご報告申し上げます。■ 発生している問題Photoshopが起動後読み込みを続けるが「応答なし」となり、終了してしまいます。正常に起動できない状態です。■ 状況の詳細 6月21日までは問題なく起動し、通常通り使用できていました。 6月20日頃から、突然起動できなくなりました。 Creative Cloudアプリおよび他のAdobeアプリ（Illustrator等）は正常に起動します。 Photoshopの環境設定リセット、GPU無効化設定、設定フォルダのリネーム、キャッシュ削除などを試しましたが改善しませんでした。 ■ 使用環境 Windows Photoshop バージョン：2026 Creative Cloud：正常動作 GPUドライバ：自動更新あり（詳細提供可能） お手数をおかけいたしますが、原因の特定および解決方法についてご教示いただけますと幸いです。何卒よろしくお願い申し上げます。

The spinning wheel appearing after every click and a massive delay when using tools like the brush or the eraser. Are there any possible fixes for these problems?Note that I used to work on photoshop using this same laptop a couple of years ago and the experience was flawless, so I’m surprised that currently I’m almost not able to do anything without waiting for the loading. I’m on the latest version of macOS running the latest version of photoshop.  

I'm using Photoshop with a Wacom Cintiq Pro and have noticed a UI issue when Windows Ink is enabled.Many Photoshop sliders become difficult to adjust with the pen.When using wintab , these are not happen.Observed behavior:Small pen movements are ignoredThe slider does not respond immediatelyMovement only begins after a certain drag threshold(about 10px) is exceededThe slider feels "sticky" or "magnetized" to its current valueabout 10 value magnetized move.Affected example:Warpadjustment panel sliderbrush size/hardness sliderNot affected example:opacity dialogliquify Because of this, making small precise adjustments with the pen becomes difficult.System:Wacom Cintiq Pro, and dual-monitor setup (total 3 monitors)Windows Ink enabledPhotoshop :from older to recent version allTo rule out tablet driver settings, Windows pen press-and-hold / double-click assistance features are disabled, and Wacom double-click distance is set to Off (0).

Hard to describe without showing an example. 😎I’ve used many methods in PS over the years to colorize an image, but I see this look in print design a lot lately. It looks like only the magenta (or cyan, or yellow) plate only got printed.How do you do this?  

I am using a MacBook Pro and an Apple Studio. The last couple of PS updates have caused me to get the following error on both machines. Any suggestions or ideas?  

I have been using CS PS4 since purchasing. Was working fine. Haven’t used in a couple years, due to moving, deaths in family, health issues, etc. Just tried to use, and receiving Error 131:4. Went to chat, and was given a number of things to try (see below). I couldn’t find some of the files. I did right-click the CS4 application shortcut and select Run as administrator. Didn’t help. Did not un-install and re-install. Went back to chat, and was told by one, then another that Adobe has shut down all past programs, and they are now forcing owners of those programs to subscribe to their cloud programs. Has anyone else encountered this? Is there a way to get my CS PS4 working again? I used a number of plug-ins (Topaz, etc.) within PS. Have I lost everything? If you encounter error 131:4 when trying to open Adobe Creative Suite 4 (CS4) after a long period of inactivity, it is likely related to insufficient permissions or corrupted licensing data. To resolve this, follow these steps:Reset pe

I forgot to change to heading to something which would describe what I have here better.  I have a very large file (the “Working Copy” I refer to below)  that I am working on, 10GB+. The dimensions are 41000+ x 22000+ px (600 ppi). If I remember correctly, it was a .psd but is now a .psb. I don’t know when it changed. I noticed it yesterday and it surprised me as I have found it as .psd before,  I think. About a week ago or so, I could, after a bit of searching online, save it to the cloud. I am a beginner and have really no clue at all what I am doing and how things work.  For a short description of what happened, read below. For my questions, jump to the questions at the bottom. After I had uploaded it, it first really slowed down my pc and it autosaved too often. (I asked a question about it last week:.)  I stopped using the psdc file and turned again to the file I have on my pc. To my surprise it began to run so much smoother now. It flowed on very nicely. It was not slow, it did n

Photoshop closes without warning during editing of large Hasselblad TIFF/PSB files. Crashes frequently occur while using Magnetic Lasso. Event Viewer identified Nik Collection 8 Palette.8li as the faulting module in at least one crash. Issue persists after Photoshop preference resets and NVIDIA driver updates. Loss of recent editing work occurs. Photoshop 27.7.0 frequently crashes without warning during normal professional editing work. The application abruptly closes and recent work is lost.My workflow involves large Hasselblad TIFF and PSB files. Crashes frequently occur while using the Magnetic Lasso tool for detailed selections, although the crash is not always immediately reproducible.System:Windows 11 Pro 24H2 Intel i9-14900KF 192 GB RAM NVIDIA RTX 4070 SUPER Wacom Intuos Pro tablet Photoshop 27.7.0Troubleshooting already performed:Reset Photoshop preferences multiple times Updated NVIDIA drivers Updated Photoshop to latest version Verified GPU compatibility No obvious hardware i

I cant use generative fill, and object selection. It said program error. anyone have same issue?object selectiongenerative fill 

Today, I updated Photoshop. Almost every time it crashes at 50 percent, so I tried again. This time it crashed, so I re-lunched the update. It crashes again. Then it’s Creative Cloud that crashes. (It’s been a while since it worked well (loading font/asking me to do a quick tour of the app/updating without problem)Finally, Photoshop updated, but what a surprise, my software language changed, my brush is gone, also my pattern, workspace, swatch, actions, gradient. And of course, NO possible way to re-import everything easily (because it's not the first time)I’m tired of the lack of reliability of those Adobe software. Every week I notice something that is really poorly made.So please ADOBE do something to correct efficiently those bugs efficiently

ggb

kjhb

before anybody else says anything I’ve done the edit>preference [removed] so don’t start. i have tried to open a image (it’s a png but that really doesn’t matter.) and all it does is crash it. not only that but since I’ve had it both it and creative cloud cause my computer to stall and freeze. creative cloud says in needs repair but it gives you error messages when you click repair and unless and the only way to get the computer and my web browser from freezing and moving slow is to end the tasks in task master. this is driving me nuts. this is a six year old laptop with about 128 gigs of storage i don’t know any other specs as i am not that much of a geek 

Final Test

Hey, I have looked around a bit and can’t seem to find a way so I figured id come to the experts.  Is there a way to Puppet Warp across more than one layer? Im making a skin for a video game and trying to move some dragon like scales and i need them to move / change shape on the diffuse, mask and 3d normals layers at the same time.I tried to make the 3 layers into a smart object and do it that way but when I convert back to layers the changes get undone.  Iv tried dulpicating the smart object 2 extra times with the idea to go into the smart object and turn off certain layers.. all with no joy =(Is this possible? Thank you in advanced!

My current workflow for photo editing is as follows:- basic adjustments in Lighroom -- “Edit In Photoshop 2026” (COMMAND+E) to open in Photoshop -- “Edit with Lighroom Adjustments” --  do full edit in Photoshop 2026 --  “Save” (COMMAND+S) to save the TIF -- finish in Lightroom for export. “Moving” the files back and forth (COMMAND+E and COMMAND+S) used to be immediate. Lately though, the communication between Lightroom and Photoshop has gotten SO slow. I’m talking a full minute to open a photo in Photoshop from Lightroom. I’m getting the pinwheel and Lightroom completely freezes (says not responding but eventually does) before the photo will open in Photoshop. The “reading TIFF format” dialogue box is on the screen for a while as well. Nothing has changed on my computer or applications, updates, etc but all of a sudden, one day it was just slow. As you can imagine, this adds an absurd amount of time to my professional editing workflow.*Note: Same results with Edit in Photoshop Beta so

bonjour  j ai un avis d’erreur programme  lorsque j’utilise  le remplacement du ciel .je dois alors fermer la fenêtre. Tous mes logiciels  sont a jour , windows, carte graphique , et ordinateur .cherche solution    merci  

I have done a lot of research but still unsure of the best laptop to buy to run windows 11 and the photoshop app. The research led me to choose a processor (Intel core),  at least 32 GB of ram, SSD with at least 1TB storage, choose a screen size (16"?), make sure I have at least 1 A port and 1 C port, a microphone and headset jack, webcam and a SD card slot. I also want touchscreen. I can spend around $1500. I thought I found a match with the Dell Inspirion 16 plus model DB 16250 but it seems unfortunately that potential conflicts with dual GPU's and modified drivers could cause issues. The sales reps at the retail stores are clueless (it seems) as what they recommend doesn't add up when I come home and do the research. I WOULD so APPRECIATE it if ANYONE has any suggestions for the right laptop to purchase. I don't do crazy things in photoshop, I touch up my photos and sometimes do composite image work. THANK YOU FOR ANY SUGGESTIONS.

Summary: When using PS 27.7.0 the sky replacement feature is unusable as the sky will not be loaded and visible as a preview in your file while you make settings adjustments for it.   (temp fix utilized: downgrading to 27.5.0 regains sky feature usage confirmed)Description:  In 27.7.0 the sky won’t preview in file to see how settings adjust new sky fit.  If you just randomly choose settings and hit done/ok, it will then load the sky into your file.  But I was not able to see what settings were resulting in sky fit to image until after it’s loaded.  Then all you are left with is adjusting the two mask layers that are not as helpful as the sky replacement settings initially are.A coworker still only had 27.5.0 installed and their sky replacement preview still worked.  So I downgraded to 27.5.0 and now mine works again from that version.  I did not attempt 27.6.0 version.  Before downgrading PS version, I attempted to rule out graphic driver by updating Nvidia graphic drivers but did not