Questions

I'm getting this error in Photoshop 2025 on macOS Monterey when trying to save to the cloud or access the resource organizer: "We can't load the resource organizer right now. Make sure all Adobe domains and subdomains are allowed on your network."Illustrator, using the same account and same device, syncs to the cloud with no issues.I've already tried: checking hosts file, DNS, proxy, and firewall (all clean), confirmed successful TLS connection directly to Adobe's servers, fully uninstalled and reinstalled Photoshop, verified Full Disk Access permissions, and reset the CoreSync service/cache. The error persists exactly the same.Any ideas on what else could cause this?

Hello, Any suggestions how I should script an action to switch between the document-level groups?    Attached a GIF demonstrating the idea    User selects a document-level group     Run Script     Script: Move Forward or Backward to next group at document-level If next is ‘Background’ layer, skip to the next group document-level group switchThanks!

Have been editing a batch of photographs today.  I have been using AI Sharpen and AI DeNoise (Topaz) without issue. I received a msg stating I was running low on credits, so I purchased a monthly sub. I was able to use these functions a couple more times - but now, each time, no matter the file, I am receiving an error that reads: “We are unable to complete your request at this time. Please try again.” I have closed and restarted PS and other apps, signed out of and back into my Creative Cloud acct, and tried toggling the Pref->Performance→Graphics Processor option (suggested online). I also cleared the plug in cache and restarted - no effect.  No luck. Stuck. Would greatly appreciate some guidance / assistance. Thx!  

When we issue a command from the action panel, the fade command (CTRL+SHIFT+F) doesn't work. The action panel is terrible. It slows things down incredibly. I had to revert to the previous version.

Even though i am selecting a black brush, on the mask layer, I am not able to brush the mask with black. On the other hand there is no problem with using a white brush, as seen on the youtube video.https://youtu.be/3BBpHtlN6dU

When I close Photoshop Rel 26.8.1 I get the following error "Can't write new document preset file". I run PS as Admin.    I tried to uninstall the app and delete the PS2025 files and cache but the problem persists. What can I do.  thanks in advance.      <Personal info removed by Mod>  

 Any one knows why this screen has invalid data?

You have removed the ability to change the pixel width or height of an image unless it is to be resampled. This is nuts! You often need to open and image and change its dimension or PPI value and NOT resample it. You want to do this in PIXELS. Why don’t you ask a few users before yanking things. I am going to have to use another app for this basic ability.

General meaning for shadow is known. In this video “Multiply” bending mode is used to create a  “realistic shadow effect” time 5.10 .   What is the meaning of shadow in this context?How to Create a Presentation Folder Mockup in Photoshop | Adobe Photoshop Tutorial  

Hi everyone. Trying to figure out what is the best way to achieve a realistic shadow under a shoe. Beside shooting it on the paper with real shadow…How are the big boys doing it ? And that on scale with large amount of products ? Ideas ? Thanks.Original Shadow   

There is a easy mehod of making drop shadow. Why was this circuitous method used in this tutorial?Drop Shadow Easy Method

The drop shadow shown on this sofa is the result of lighting and actual photography.Is there a way to create this within Photoshop?I know how the basic drop shadow works, and even using multiple drop shadows.Does Photoshop need to treat this like the a 3D image? 

Hello,I have tried and tried and tried to make a realistic shadow, but I can't make it looking realistic using this tutorial Create Highly Realistic Shadows by Detaching Drop Shadow in Photoshop - YouTube  What can I do to make this shadow realistic?

Hi everyone,We are currently updating the product images on our website https://www.daltaios.com/, but we noticed they look quite pixelated on Retina displays and newer mobile screens.Should I be exporting all image assets at 2x resolution directly from Photoshop, or is there a better modern workflow to ensure crisp visuals while keeping the file sizes small for fast loading times?Any advice on compression tools or responsive image practices would be greatly appreciated!

I am experiencing 3 problems with photoshop When I add a text and I want to go to filter gallery and add HALFTONE to add lines on my text It doesn’t apply it  All of my blend modes when i hover on them it either turn them white or black and that's it  when I want to make a text transparent after I added effect (changing the R,G,B Channels to make a cool effect) it instantly turn it black and if i want to make the background black or other colors it fully cover the entire text. Its so weird because previously it worked perfectly but when I try to do another one this happen. I tried everything from Uninstalling photoshop, Adobe cleaner tool, to graphics card updates but nothing would work  

When printing in Photoshop the default resolution is 240 dpi. I would like to increase this to 300 dpi and would be grateful for advice on how this can be done.

First, I really like this feature. Having actions available as buttons with assigned shortcuts can significantly speed up repetitive workflows.A few suggestions:Shortcut conflicts: If a shortcut is already in use, Photoshop should show which command or action is using it and allow users to reassign that shortcut directly from the conflict dialog instead of simply blocking the assignment. Editable save settings: For save-related actions (PNG, JPEG, TIFF, PSD, etc.), it should be possible to open and edit the associated save settings directly from this panel, including compression, transparency, ICC profiles, metadata, layers, and other format-specific options. Better keyboard navigation: Pressing Enter should save changes immediately. Pressing Esc should return to the previous screen. The entire interface should be fully keyboard-accessible. Basic UX. Save button placement: The Save button sits at the bottom of the panel. Consider moving it higher, duplicating it at the top, or relying

Hi everyone,I’m having an issue with Photoshop 2026 on Windows 11.Photoshop opens normally and I can create/edit blank documents, but it instantly crashes when opening:- JPG/JPEG files- RAW files- Lightroom “Edit in Photoshop”PNG files open correctly without problems.Also, clicking Preferences > Camera Raw crashes Photoshop immediately.System:- Predator Helios 300- i7 10th Gen- RTX 2060- Lightroom Classic 2026Things already tried:- Reinstalled Photoshop, Lightroom, and Camera Raw- Reset Photoshop preferences- Disabled GPU acceleration- Installed NVIDIA Studio Driver- Cleared Camera Raw cache/settings- Disabled plugins- Restarted Windows multiple timesHas anyone experienced Photoshop crashing only with JPG/JPEG and RAW files while PNG works fine?Thank you!

I was given a lot of photos of diagrams and asked to remove the creases so they would look a bit flatter. How can I do this in Photoshop?The photo shows an example of creases.

i went to developer site, create the project and wanted to add to APIall of the things that i wanted, cannot be added to apii subscribe to creative cloud pro for API and now none of it work.How to make it work?

Is there a way to turn off the sample text in the Photoshop Character palette? I thought I had this one solved by just setting the "Number of Recent Fonts to Display" to "0". This tactic has worked for years and it was working but now the previews are back even with the 0 recent fonts set. I can't figure out how turn them off and I’m about ready to uninstall the most recent Photoshop updates. 

I have a new install of Adobe Creative Cloud and Adobe Photoshop. Before I did anything, I tried using the brush tool to paint a line. I discovered that at 100% hardness, the brush tool does not fill the circle that represents the brush all the way to the edge. See attached photos. (1) The first photo shows the brush filling black paint on a gray background. You can see that the paint does not fill in to the edge of the circle. The brush is set to 100% hardness, 100% Opacity, 100% Flow, 10% Smoothing. Default setup from Adobe install. (2) The second photo shows the Settings for the Cursor in Preferences. Again, all default from Adobe. Why is this not filling the circle 100% and how can I change this? Thank you! 

My genereative ai credits are disappearing without me using any ai. I opened a jpg in photoshop, went to the adjustments panel and manually used the sliders to adjust the levels. When I opened Photoshop I had 34/1000 credits left. When I saved out my jpg after adjusting the levels I had 33/1000 credits. I did not use any form of the generative ai.Additionally when I do use the generative ai to extend one photo it uses far more than one credit. This morning I started with 60/1000 credits. I opened the jpg I wanted to extend. I used my crop tool to extend all sides to where I wanted them and hit generate to fill in. I flattened my image, saved and closed, my credits went all the way down to 34/1000.

Today I encountered with a Telegram channel which is Uploding Pirated adobe softwares.   [Link to piracy site removed]   This is the link to channel.   I have attached some of the screenshots, there are many softwares.   Hope you take actions on it.   Thankyou. Mikhel Singh

Having an issue converting OCIO files from scene referred AcesCG to display referred ICC profiles in Photoshop 2025.  From reading the PS documentation I see that Edit > Duplicate to Image Profile command does this, as it offers all the available working ICC profiles as the target settings for the output. If I set the output space to sRGB then then conversion matches fine, but if I select any other RGB profile as the target (such as Adobe RGB, ProPhoto etc) then the colours get too saturated ?  Looks like the command preserves the sRGB values but just display them as Adobe RGB/ProPhoto colours,  i.e. the same result as Assign Profile from sRGB > Adobe RGB etc in an ICC workflow. and the resulting saturation/hue shifts. Any ideas why this is happening and If this is the correct behaviour and if so, why bother offering other output ICC output profiles and labelling it as a conversion if the gamut is always sRGB ?